1. Pengenalan
The TecMate Optimate 4 Dual Program is an advanced 9-step 12V 1A battery saving charger, tester, and maintainer designed for 12V lead-acid batteries, including AGM, GEL, STD, Starter, and Deep Cycle types. This device is engineered to optimize battery performance and extend battery life by providing automatic charging, testing, and long-term maintenance. It features two distinct programs for direct battery connection and CAN-bus systems, making it suitable for a wide range of vehicles such as motorcycles, ATVs, side-by-sides, and personal watercraft.
2. Arahan Keselamatan Penting
Please read and understand all safety instructions before operating the TecMate Optimate 4. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Asid Bateri: Batteries contain sulfuric acid, which is corrosive. Avoid contact with skin, eyes, or clothing. In case of contact, flush immediately with water and seek medical attention.
- Gas Letupan: Batteries generate explosive hydrogen gas during charging. Ensure adequate ventilation and avoid open flames or sparks near the battery.
- Perlindungan Mata: Sentiasa memakai pelindung mata semasa bekerja dengan bateri.
- Kejutan Elektrik: Do not touch uninsulated battery terminals or wiring. Ensure the charger is disconnected from the AC power supply before making or breaking connections to the battery.
- Penggunaan Dalaman: Pengecas ini direka bentuk untuk kegunaan di dalam rumah. Jangan dedahkannya kepada hujan atau kelembapan berlebihan.
- Peralatan Rosak: Do not operate the charger if it has been dropped, damaged, or if the power cord or connectors are compromised.
- Kanak-kanak: Jauhkan pengecas dan bateri daripada kanak-kanak.
- Keserasian: Use this charger only for 12V lead-acid batteries (AGM, GEL, STD, Deep Cycle). Do not attempt to charge non-rechargeable batteries or batteries of different voltages.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej anda:
- TecMate Optimate 4 Dual Program Battery Charger
- Battery Lead (ring terminal connectors with inline fuse)
- Battery Clips (alligator clips)
4. Produk Lebihview
The Optimate 4 unit features a robust casing and an intuitive LED display panel. It includes detachable battery connection cables for versatility.
Figure 1: TecMate Optimate 4 Dual Program Battery Charger with included ring terminal and alligator clip connectors.
The image displays the main Optimate 4 charger unit, which is dark blue with a silver-grey control panel. The control panel features various LED indicators for test, save, charge, and maintain functions, along with battery type selection (AGM, STD, GEL, Deep Cycle) and an AMPS display. Also shown are the two types of battery connectors: a set of red and black ring terminal connectors with an inline fuse, and a set of red and black alligator clips. These accessories provide flexible connection options to different battery terminals.
Ciri-ciri Utama:
- Dual Program Modes: Program 1 for direct battery connection, Program 2 for CAN-bus systems.
- 9-Step Charging: Comprehensive process including desulfation, bulk charge, absorption, and maintenance.
- Penjimatan Bateri: Capable of recovering deeply discharged batteries from as low as 0.5V.
- Automatic Testing: Performs battery health tests before and after charging.
- Long-Term Maintenance: Provides continuous, safe maintenance charging to prevent self-discharge.
- Kes Tertutup: Protects against spills and light rain.
5. Persediaan dan Sambungan
Before connecting the charger, ensure the battery terminals are clean and free of corrosion. Select the appropriate connection method for your battery.
5.1 Menyambung ke Bateri
- Pilih Penyambung: Select either the ring terminal connectors for permanent installation or the alligator clips for temporary connection.
- Sambung Positif: Connect the red (+) connector to the positive (+) battery terminal.
- Sambungkan Negatif: Connect the black (-) connector to the negative (-) battery terminal.
- Sambung ke Pengecas: Plug the chosen battery connector into the output port of the Optimate 4 charger.
- Hidupkan kuasa: Plug the Optimate 4 into a standard AC power outlet (100-240V, 50-60Hz).
5.2 Pemilihan Program
The Optimate 4 offers two programs, indicated by LEDs on the control panel:
- Program 1 (Direct): For direct connection to a 12V lead-acid battery using the provided battery clips or ring terminals. This is the default program.
- Program 2 (CAN-bus): For charging 12V batteries through a CAN-bus system, typically found on some motorcycles. Refer to your vehicle's manual for specific CAN-bus charging instructions. To select Program 2, press and hold the program selection button (usually indicated by a circular arrow icon) for 3 seconds after connecting to the battery and AC power.
6. Arahan Operasi
Once connected and powered, the Optimate 4 will automatically begin its 9-step program. The LEDs on the control panel provide real-time status updates.
6.1 LED Indicators and Program Stages
| Penunjuk | Penerangan |
|---|---|
| UJIAN (10s) | Bateri awal voltage and health test. Determines the battery's state of charge and condition. |
| SAVE (15m-2h) | Recovery mode for deeply discharged batteries (as low as 0.5V). Applies a low current to safely bring the voltage naik. |
| CHARGE (48h max) | Bulk charge phase, delivering maximum current (up to 1A) to bring the battery to full capacity. |
| MAINTAIN (365) | Long-term maintenance mode. The charger periodically tests the battery and delivers a precise charge to counteract self-discharge, keeping the battery optimally charged without overcharging. |
| AMPS Display | Indicates the current (in Amps) being delivered to the battery during charging. |
| LED Jenis Bateri | Indicates the detected or selected battery type: AGM, STD (Standard), GEL, or Deep Cycle. |
The Optimate 4 is fully automatic. Once connected, it will proceed through the necessary steps to charge and maintain your battery. You do not need to manually intervene unless you wish to change the program mode.
7. Penyelenggaraan
Proper care of your Optimate 4 charger and battery will ensure long-lasting performance.
- Charger Cleaning: Disconnect the charger from AC power and the battery before cleaning. Wipe the casing dengan lembut, damp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Pemeriksaan Penyambung: Regularly inspect the battery connectors and cables for any signs of damage, corrosion, or wear. Replace if necessary.
- Terminal Bateri: Keep battery terminals clean and tight for optimal connection.
- Storan: Simpan pengecas di tempat yang sejuk dan kering apabila tidak digunakan.
8. Penyelesaian masalah
If you encounter issues with your Optimate 4, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca / Penyelesaian |
|---|---|
| Charger not turning on / No LEDs lit. |
|
| Charger remains in TEST or SAVE mode for an extended period. |
|
| Charger indicates a fault (specific LED pattern, refer to full manual). |
|
| Battery not charging or holding a charge. |
|
For detailed fault codes or specific LED patterns, please consult the comprehensive manual provided with your product or visit the official TecMate support webtapak.
9. Spesifikasi Teknikal
| Ciri | Perincian |
|---|---|
| Jenama | TecMate |
| Model | TM-341 |
| Input Voltage | 100-240V AC, 50-60Hz |
| Keluaran Voltage | 12V DC |
| Mengecas Arus | 1A (maks) |
| Jenis Bateri | 12V Lead-Acid (AGM, GEL, STD, Deep Cycle) |
| Berat Barang | 1.9 paun (lebih kurang) |
| Dimensi Pakej | 11.14 x 6.46 x 2.76 inci (lebih kurang) |
| Penilaian Keselamatan | CE |
| Tarikh Mula-mula Tersedia | 13 Ogos 2008 |
10. Waranti dan Sokongan
For detailed warranty information, please refer to the warranty card included with your product or visit the official TecMate website. For technical support, product registration, or further inquiries, please contact TecMate customer service or visit their online support resources.
Anda boleh mendapatkan lebih banyak maklumat dan sokongan pada TecMate Brand Store.