JBL MPS1000 10-Inch Powered Marine Subwoofer Instruction Manual

1. Pengenalan

The JBL MPS1000 is a high-performance 10-inch powered marine subwoofer designed to deliver robust bass in challenging marine environments. This manual provides essential information for proper installation, operation, and maintenance of your subwoofer, ensuring optimal performance and longevity.

2. Maklumat Keselamatan

• Always disconnect the battery before performing any electrical work to prevent electrical shock or damage.
• Pastikan semua sambungan pendawaian kukuh dan bertebat dengan betul untuk mengelakkan litar pintas dan potensi bahaya kebakaran.
• Consult a professional for installation if you are unsure about any steps or electrical procedures.
• This product is designed for marine use; however, proper installation is crucial to prevent water damage to electrical components.
• Do not expose the subwoofer to extreme temperatures or direct sunlight for prolonged periods.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• JBL MPS1000 10-Inch 250-Watt Powered Marine Subwoofer
• Templat Pemasangan
• Manual Pemilik (dokumen ini)
• Mounting Hardware (screws, fuse)

4. Ciri-ciri

The JBL MPS1000 subwoofer incorporates several key features for superior marine audio performance:

• 10-inch, 250-Watt Powered Design: Delivers powerful bass output suitable for marine environments.
• Bersepadu Amplifier and Enclosure: Simplifies installation and optimizes performance.
• Built-in 12dB Electronic Crossover: Adjustable between 70Hz and 170Hz for seamless integration with other speakers.
• Built-in Bass EQ: Provides 40Hz adjustment between -6dB and +3dB to fine-tune bass response.
• Watertight Protective Cover: Controls are protected from marine elements.
• Marinized Circuit Board: Engineered to withstand harsh salt air and corrosion.
• Kon polipropilena: Durable and resistant to moisture.
• Perkakasan Keluli Tahan Karat: Ensures longevity in marine conditions.

5. Pemasangan

The MPS1000 is designed for flexible installation in various marine vessels. Its compact size and low heat sink facilitate placement in tight spaces. Use the provided mounting template for accurate cutout dimensions.

5.1 Pertimbangan Penempatan

• Ensure the chosen location allows for adequate air circulation around the subwoofer, despite its low heat sink design.
• Consider the subwoofer's dimensions: 13-1/16 inches (width) by 7-15/16 inches (height) by 13 inches (depth) for the main subwoofer unit. The overall product dimensions are 12 x 10 x 12 inci.
• Mounting should be secure to prevent movement during vessel operation.

6. Pendawaian

Proper wiring is essential for the safety and performance of your JBL MPS1000 subwoofer.

6.1 Sambungan Kuasa

• A heavy gauge dedicated power wire must be run directly from the vessel's battery to the subwoofer.
• Install a special type of fuse (as specified in the owner's manual, not included in the box) near the battery terminal. This fuse is critical for protecting the system from overcurrent.
• The maximum current draw for the unit is 14A.

6.2 Input Isyarat

The MPS1000 supports two types of audio input:

• Input Tahap Baris: Accepts signals from 100mV to 6V. Use RCA cables for this connection.
• Input Peringkat Pembesar Suara: Accepts signals from 1V to 13V. Connect directly to your existing speaker wires.

7. Operasi

Once the JBL MPS1000 is correctly installed and wired, it is ready for operation. Ensure your audio source is connected and powered on. The subwoofer will automatically activate when an audio signal is detected.

8. Tuning and Adjustments

The MPS1000 provides several controls to optimize its performance for your specific audio system and listening preferences. These controls are located on the front panel, protected by a watertight cover.

8.1 Electronic Crossover Adjustment

• The built-in 12dB electronic crossover allows you to set the upper frequency limit for the subwoofer.
• Adjust this control between 70Hz dan 170Hz to ensure a smooth transition between the subwoofer and your main speakers. A lower setting will focus on deeper bass, while a higher setting will allow the subwoofer to play higher bass notes.

8.2 Bass EQ Adjustment

• The variable bass-boost circuit, or Bass EQ, provides adjustment at 40Hz.
• You can adjust this setting between -6dB and +3dB to enhance or reduce the bass impact at this specific frequency. This is particularly useful for compensating for acoustic characteristics of your vessel or limited placement options.

9. Penyelenggaraan

To ensure the longevity and optimal performance of your JBL MPS1000 subwoofer, follow these maintenance guidelines:

• Pembersihan tetap: Wipe the exterior of the subwoofer with a soft, damp cloth. Avoid using abrasive cleaners or solvents, which can damage the finish or protective coatings.
• Periksa Sambungan: Periodically check all wiring connections for corrosion or looseness. Ensure they remain secure and properly insulated.
• Watertight Cover: Always ensure the watertight protective cover over the controls is securely closed when not making adjustments.
• Cone Inspection: Visually inspect the polypropylene cone for any signs of damage, tears, or deterioration.
• Pemeriksaan perkakasan: Verify that all stainless steel mounting hardware remains tight and free from corrosion.

10. Penyelesaian masalah

If you encounter issues with your JBL MPS1000 subwoofer, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, contact JBL customer support or a qualified marine audio technician.

11. Spesifikasi

Detailed technical specifications for the JBL MPS1000:

12. Waranti dan Sokongan

The JBL MPS1000 10-Inch Powered Marine Subwoofer is covered by a waranti terhad setahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

For warranty service, technical support, or to obtain replacement parts, please contact JBL customer service through their official webtapak atau pusat servis yang sah. Simpan bukti pembelian anda untuk tuntutan jaminan.