Canton DM 2

Canton DM 2 Home Cinema System Instruction Manual

Model: DM 2 (02306)

pengenalan

This manual provides essential information for the safe and efficient operation of your Canton DM 2 Home Cinema System. The DM 2 is a 2.1 channel system designed to enhance your audio experience with powerful sound. Please read these instructions thoroughly before installation and use, and retain them for future reference.

Canton DM 2 Home Cinema System with one large subwoofer and two small satellite speakers

Image: The Canton DM 2 Home Cinema System, featuring a large black subwoofer on the left with silver feet, and two smaller black satellite speakers on the right, each with a mesh grille. This image illustrates the primary components of the 2.1 channel system.

Arahan Keselamatan

Kandungan Pakej

Upon unpacking, please verify that all the following components are present:

Persediaan

1. Penempatan Fizikal

2. Sambungan

  1. Sambungkan Pembesar Suara Satelit: Use the provided speaker cables to connect the two satellite speakers to the corresponding speaker outputs on the subwoofer. Ensure correct polarity (positive to positive, negative to negative).
  2. Sambungkan Sumber Audio: Connect your audio source (e.g., television, DVD player, streaming device) to the audio input on the subwoofer. Common input types include RCA stereo or optical digital. Refer to your subwoofer's rear panel for available input options.
  3. Sambungkan Kuasa: Plug the power cable into the subwoofer's power input, then connect the other end to a wall outlet.

Note: Ensure all connections are secure before powering on the system.

Arahan Operasi

1. Operasi Asas

2. Mod Audio

The Canton DM 2 operates as a 2.1 channel system, providing stereo sound with enhanced bass from the dedicated subwoofer. The system is designed to deliver a surround-like audio experience for movies and music.

Penyelenggaraan

Menyelesaikan masalah

Masalah Kemungkinan Punca Penyelesaian
Tiada kuasa Power cable not connected; wall outlet not active. Ensure power cable is securely plugged in. Test the wall outlet with another device.
Tiada bunyi Incorrect input selected; volume too low; audio cables not connected properly. Pilih sumber input yang betul. Tingkatkan kelantangan. Periksa semua sambungan kabel audio.
Bunyi herot Volume too high; poor audio source quality; damaged cables. Reduce volume. Test with a different audio source. Inspect and replace damaged cables.
Subwufer tidak berfungsi Subwoofer volume too low; incorrect settings. Increase subwoofer volume. Check subwoofer settings on the unit or remote.

If the problem persists after attempting these solutions, please contact Canton customer support.

Spesifikasi

Waranti dan Sokongan

For information regarding warranty coverage, service, or technical support, please refer to the warranty card included with your product or visit the official Canton webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

Pegawai Canton Webtapak: www.canton.de