Manual Arahan Lampu Sorot RAB Lighting LFP16A yang Anggun

1. Produk Lebihview

The RAB Lighting LFP16A Sleek Floodlight is designed for outdoor illumination, providing efficient and durable lighting. This fixture accommodates a PAR16 type bulb and features a robust die-cast aluminum housing with a powder-coated finish for enhanced durability and weather resistance.

Ciri-ciri Utama:

• Designed for 60W PAR16 bulbs, delivering 650 lumens output (bulb not included).
• Durable die-cast aluminum housing with a powder-coated finish.
• Gasket and O-ring seals provide resistance against weather elements.
• Integrated shield helps reduce glare.
• Equipped with a 1/2" NPS threaded arm for secure mounting and a locking swivel for adjustable positioning.

Figure 1: RAB Lighting LFP16A Sleek Floodlight. This image shows the floodlight fixture with its threaded arm and wiring, highlighting its compact and durable design.

2. Maklumat Keselamatan

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Keselamatan Elektrik: Always disconnect power at the circuit breaker or fuse box before wiring or servicing the fixture.
• Juruelektrik Berkelayakan: Pemasangan hendaklah dilakukan oleh juruelektrik yang berkelayakan mengikut semua kod elektrik tempatan dan kebangsaan.
• Pembumian: Ensure the fixture is properly grounded to avoid potential electrical hazards.
• Jenis Mentol: Use only PAR16 type bulbs with a maximum wattage of 60W. Exceeding the maximum wattage boleh menyebabkan terlalu panas dan kerosakan pada lekapan.
• Lokasi basah: This fixture is suitable for wet locations. Ensure all connections are properly sealed and waterproofed during installation.
• Suhu: Do not install near combustible materials or surfaces that may be affected by heat.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• RAB Lighting LFP16A Sleek Floodlight Fixture (1)
• Manual Arahan (1)

Note: Light bulb and wire connectors are not included and must be purchased separately.

4. Persediaan dan Pemasangan

This floodlight is designed for wall mounting and features a 1/2" NPS threaded arm for secure attachment to a junction box or mounting accessory. Follow these steps for proper installation:

1. Sediakan untuk Pemasangan:
   • Matikan kuasa pada pemutus litar sebelum memulakan sebarang kerja elektrik.
   • Gather necessary tools: screwdriver, wire strippers, electrical tape, silicone sealant (for waterproofing).
2. Pasang Lekapan:
   • Thread the 1/2" NPS arm of the floodlight into a compatible outdoor junction box or mounting plate. Ensure a tight and secure connection.
   • Use the locking swivel to adjust the initial angle of the fixture.
   

   Figure 2: Detail of the 1/2" NPS threaded arm and 180-degree adjustable swivel. This illustrates the mounting mechanism and flexibility of the floodlight.
3. Sambungan Pendawaian:
   • Connect the black wire from the fixture to the hot (black) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (white) wire from the power supply.
   • Connect the bare copper or green wire from the fixture to the ground wire from the power supply.
   • Secure all connections with appropriate wire connectors and electrical tape. For outdoor installations, consider using silicone-filled wire nuts for added moisture protection.
4. Pasang Mentol:
   • Carefully insert a PAR16 bulb (max 60W) into the fixture socket. Do not overtighten.
5. Seal and Test:
   • Ensure all connections are secure and the fixture is properly sealed against moisture. Apply silicone sealant around the mounting base if necessary.
   • Restore power at the circuit breaker and test the floodlight's operation.

5. Arahan Operasi

Once installed and powered, the RAB Lighting LFP16A Floodlight operates by the control of the circuit it is connected to (e.g., a wall switch, timer, or photocell). There are no direct controls on the fixture itself.

• Melaraskan Arah Cahaya: The fixture features a locking swivel arm. To adjust the light direction, loosen the locking nut on the swivel, position the floodlight as desired, and then tighten the locking nut securely.
• Pengurangan silau: The built-in shield is designed to minimize glare, directing light effectively to the intended area.

Gambar 3: Cthample of the LFP16A floodlight used in a landscape setting, demonstrating its illumination capabilities.

6. Penyelenggaraan

Penyelenggaraan berkala memastikan prestasi optimum dan jangka hayat lampu limpah anda.

• Pembersihan: Bersihkan bahagian luar lekapan secara berkala dengan kain lembutamp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish. Ensure power is off before cleaning.
• Penggantian mentol:
  1. Matikan kuasa pada lekapan pada pemutus litar.
  2. Biarkan mentol lama sejuk sepenuhnya sebelum mengendalikannya.
  3. Carefully unscrew and remove the old PAR16 bulb.
  4. Insert a new PAR16 bulb (max 60W) into the socket, ensuring it is seated correctly.
  5. Pulihkan kuasa dan uji mentol baharu.
• Pemeriksaan: Annually inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

The RAB Lighting LFP16A Sleek Floodlight comes with a Waranti pengilang selama 1 tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

For warranty claims, technical support, or further assistance, please contact RAB Lighting customer service. Refer to the official RAB Lighting webtapak untuk maklumat hubungan terkini.

Pengeluar: Pencahayaan RAB

Webtapak: www.rablighting.com (Cthamppautan le, pautan sebenar mungkin berbeza-beza)