RAB Lighting C100W

Manual Arahan Bulat Penutup Kalis Cuaca RAB C100W

Model: C100W | Brand: RAB Lighting

Produk Selesaiview

The RAB C100W is a durable, weatherproof round cover designed for electrical installations. It features a single hole and is finished in white, ensuring protection against outdoor elements.

RAB C100W Weatherproof Cover Round

Image: The RAB C100W Weatherproof Cover, a round, white cover with a central hole and mounting points.

Ciri-ciri Utama:

Persediaan dan Pemasangan

This section provides general guidelines for installing the RAB C100W weatherproof cover. Always consult local electrical codes and a qualified electrician for specific installation requirements.

  1. Keselamatan Diutamakan: Before beginning any electrical work, ensure the power supply to the circuit is turned off at the circuit breaker or fuse box. Verify with a voltage penguji.
  2. Sediakan Permukaan: Ensure the mounting surface is clean, dry, and flat.
  3. Letakkan Sampul: Align the C100W cover with the electrical box or fixture it is intended to protect. The central hole should align with the conduit or cable entry point.
  4. Pemasangan selamat: Use appropriate screws (not included) to securely fasten the cover to the electrical box or mounting surface through the designated mounting holes. Ensure a tight fit to maintain the weatherproof seal.
  5. Penempatan Gasket: Ensure the 1/8 inch thick closed-cell silicone rubber weatherseal gasket is properly seated between the cover and the mounting surface to create a watertight seal.
  6. Cable/Conduit Connection: Route the electrical cable or conduit through the central opening. Ensure all connections are made according to electrical standards and local codes.
  7. Semakan Akhir: Double-check all connections and ensure the cover is firmly secured before restoring power.

Arahan Operasi

The RAB C100W is a passive weatherproof cover and does not have operational controls. Its function is to provide protection for electrical connections and components from environmental factors.

Penyelenggaraan

Regular maintenance helps ensure the longevity and effectiveness of the RAB C100W weatherproof cover.

Menyelesaikan masalah

This section addresses common issues related to the RAB C100W weatherproof cover.

MasalahKemungkinan PuncaPenyelesaian
Water ingress/leaksDamaged or improperly seated gasket; Loose mounting screws; Improper sealing around conduit/cable entry.Ensure gasket is correctly positioned and undamaged. Tighten all mounting screws. Apply appropriate sealant around cable/conduit entry points if necessary. Replace gasket if damaged.
Cover feels looseMounting screws are loose or stripped.Tighten mounting screws. If screws are stripped, use larger screws or appropriate anchors.
Corrosion on cover surfaceExposure to harsh chemicals or extreme environmental conditions.Clean the surface with a mild, non-abrasive cleaner. While the cover is corrosion-proof, extreme conditions can affect surface appearance.

Spesifikasi

AtributPerincian
Nombor ModelC100W
JenamaPencahayaan RAB
bahanDie-cast Aluminum (cover), Polycarbonate (components), Silicone Rubber (gasket)
bentukBulat
Warna/Selesaiputih
Berat Barang3.2 auns
Voltage Peringkat120 Volt
Wattage Peringkat100 watt
Jenis Gasket1/8 inch thick closed-cell silicone rubber
UPC019813934075
Tarikh Tersedia Pertama23 Ogos 2007

Maklumat Waranti

The RAB C100W Weatherproof Cover is covered by a manufacturer's warranty. For specific details regarding warranty terms, conditions, and duration, please refer to the official documentation provided with your purchase or contact RAB Lighting directly.

Note: Warranty coverage typically applies to defects in materials and workmanship under normal use and service. Damage resulting from improper installation, misuse, abuse, or unauthorized modifications may not be covered.

Sokongan Pelanggan

For technical assistance, product inquiries, or warranty claims, please contact RAB Lighting customer support.

Dokumen Berkaitan - C100W

Praview Panduan Pemasangan Lekapan RAB Lighting SHARK dan Sistem Kawalan Lightcloud
Arahan pemasangan dan panduan persediaan yang komprehensif untuk siri lekapan lampu SHARK RAB Lighting dan sistem kawalan pencahayaan tanpa wayar Lightcloud yang serba boleh, meliputi pemasangan, pendawaian dan konfigurasi.
Praview Pencahayaan RAB A17 FA Arahan Pemasangan Kit Tiang Universal Boleh Laras Lampu Kawasan FA
Panduan pemasangan langkah demi langkah untuk Kit Pemasangan Kutub Sejagat Boleh Laras Lampu Kawasan RAB A17 FA. Termasuk maklumat keselamatan penting, prosedur pemasangan dan butiran hubungan untuk sokongan.
Praview Arahan Pemasangan Lekapan Lampu LED A22™ RAB FIELD-ADJUSTABLE
Panduan pemasangan yang komprehensif untuk lekapan lampu LED RAB FIELD-ADJUSTABLE A22™, penutup tiang, pelekap slipfitter, pelekap dinding, pelarasan medan, pendawaian dan penyelenggaraan.
Praview Panduan Pemasangan Panel Boleh Laras Medan RAB T34
Panduan pemasangan komprehensif untuk lampu Panel LED Boleh Laras Medan RAB T34 (1x4, 2x2, 2x4). Meliputi pemasangan siling ceruk, pelarasan medan, pendawaian dan model sandaran bateri.
Praview Panduan Pemasangan Penyambung Trek TK | Pencahayaan RAB
Arahan pemasangan rasmi untuk Penyambung Trek TK RAB Lighting (TK4/B). Ketahui cara memasang dan menyambungkan sistem pencahayaan trek dengan selamat, mengenal pasti kekutuban dan menggunakan pelbagai jenis penyambung dan suapan kuasa.
Praview Arahan Pemasangan LED Boleh Laras Medan ALED® | Pencahayaan RAB
Panduan pemasangan komprehensif untuk lekapan LED boleh laras medan ALED® RAB Lighting (ALEDXXS, ALEDXS). Termasuk pemasangan, pendawaian, pelarasan medan dan penyelesaian masalah.