Soundking AK20-RA

Soundking AK20-RA Guitar AmpManual Pengguna yang lebih hidup

pengenalan

Terima kasih kerana membeliasing the Soundking AK20-RA Guitar Amplifier. This 60-watt, 2-channel amplifier is designed for electric guitar and bass, offering versatile sound options for practice and small performances. Please read this manual thoroughly to ensure proper operation and to maximize your amplifier's potential.

Arahan Keselamatan Penting

Kandungan Pakej

Produk Selesaiview

The Soundking AK20-RA features a user-friendly control panel and essential connections for various applications.

Kawalan Panel Hadapan

jarak dekat view of the Soundking AK20-RA amplifier's front panel controls.

Penerangan Imej: A close-up photograph of the Soundking AK20-RA guitar amplifier's front control panel. It shows the input jack, various knobs for Overdrive, Volume, Treble, Mid, Bass, Presence, Reverb, and Phones, along with the Power switch. The "Digital Reverb" and "Depth Master" sections are clearly visible.

  1. MASUKKAN: Connect your electric guitar or bass here using a standard 6.35mm (1/4-inch) instrument cable.
  2. OVERDRIVE: Activates the overdrive channel. Use this knob to adjust the amount of distortion (gain).
  3. JILID: Mengawal volum keluaran keseluruhan amplebih hidup.
  4. Treble: Laraskan tindak balas frekuensi tinggi nada anda.
  5. PERTENGAHAN: Adjusts the mid-range frequency response of your tone.
  6. ASAS: Laraskan tindak balas frekuensi rendah nada anda.
  7. KEHADIRAN: Fine-tunes the upper-mid to high-frequency range, adding clarity and sparkle.
  8. REVERB: Controls the level of the integrated digital reverb/delay effect.
  9. TELEFON: Connect headphones here for silent practice. The main speaker will be muted when headphones are connected.
  10. KUASA: Main power switch for turning the ampLifier HIDUP atau MATI.

Rear Panel Connections (Effect Loop)

jarak dekat view of the Soundking AK20-RA amplifier's rear panel effect loop connections.

Penerangan Imej: A close-up photograph of the Soundking AK20-RA guitar amplifier's rear panel, specifically highlighting the "EFFECT LOOP" section. It shows two 6.35mm (1/4-inch) jacks labeled "RETURN" and "SEND".

  • HANTAR: Connect this output to the input of external effects pedals (e.g., modulation, delay, reverb).
  • KEMBALI: Connect the output of your external effects pedals to this input.

Persediaan

  1. penempatan: Letakkan amplifier on a stable, flat surface. Ensure adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
  2. Sambungan Kuasa: Memastikan amplifier's POWER switch is in the OFF position. Connect the supplied power cable to the ampsalur masuk kuasa penghawa dingin dan kemudian ke salur keluar kuasa AC yang sesuai.
  3. Sambungan Instrumen: Connect your electric guitar or bass to the INPUT bicu pada panel hadapan menggunakan kabel instrumen berkualiti tinggi.
  4. Tetapan Awal: Before powering on, set all volume and gain knobs (VOLUME, OVERDRIVE, REVERB) to their minimum (0) positions. Set the equalizer knobs (TREBLE, MID, BASS, PRESENCE) to their center (5) positions.

Arahan Operasi

Menghidupkan/Mematikan

  • To turn ON: Ensure all volume controls are at minimum, then press the KUASA beralih ke kedudukan ON.
  • To turn OFF: Lower all volume controls, then press the KUASA tukar ke posisi OFF.

Clean Channel Operation

  • Memastikan LUAR BIASA knob is set to 0 (off).
  • Perlahan-lahan tingkatkan JILID tombol ke tahap pendengaran yang anda inginkan.
  • Gunakan TREBLE, PERTENGAHAN, BASS, dan KEHADIRAN controls to shape your clean tone.

Overdrive Channel Operation

  • To engage the overdrive channel, rotate the LUAR BIASA knob clockwise from 0.
  • Laraskan LUAR BIASA knob to control the amount of distortion or gain.
  • Laraskan JILID knob for the overall output level of the overdrive channel.
  • Gunakan TREBLE, PERTENGAHAN, BASS, dan KEHADIRAN controls to further shape your distorted tone.

Using the Digital Reverb/Delay

  • The AK20-RA features an integrated digital reverb/delay effect.
  • Putar REVERB knob clockwise to increase the intensity and duration of the effect.

Using the Effect Loop

  • The effect loop allows you to integrate external effects pedals into the amplifier's signal path after the preamp bahagian.
  • Sambungkan HANTAR jack to the input of your external effects pedal(s).
  • Connect the output of your external effects pedal(s) to the KEMBALI jek.
  • This placement is ideal for time-based effects like delay, chorus, or flanger, ensuring they are applied to the amplifier's processed tone (clean or overdrive).

Penggunaan Fon Kepala

  • Plug standard stereo headphones into the TELEFON jack for silent practice.
  • Connecting headphones will automatically mute the amplifier's internal speaker.
  • Laraskan JILID knob to control the headphone output level.

Penyelenggaraan

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Tiada bunyiAmplifier not powered on; Volume knobs set to minimum; Instrument cable faulty or not connected; Headphones connected.Check power switch and cable; Increase VOLUME; Check instrument cable connections; Disconnect headphones.
Weak or distorted sound (unexpected)Incorrect gain/volume settings; Faulty instrument cable; Guitar/bass output issues; External effects loop issues.Adjust VOLUME and OVERDRIVE knobs; Try a different instrument cable; Check guitar/bass battery or electronics; Bypass external effects.
Bunyi dengung atau berdengungGround loop; Faulty cable; Interference from other electronic devices.Try plugging into a different outlet; Use shielded cables; Move amplifier away from other electronics; Check for faulty cables.
Effects loop not workingCables incorrectly connected; External effect pedal not powered or faulty.Ensure SEND is connected to pedal input and pedal output to RETURN; Check power and functionality of external pedal.

Spesifikasi

Waranti dan Sokongan

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your local Soundking dealer. Please retain your proof of purchase for warranty claims.

Dokumen Berkaitan - AK20-RA

Praview Manual Pengguna Pengadun Digital Soundking DM20
Manual pengguna yang komprehensif untuk Soundking DM20 Digital Mixer, memperincikan ciri, spesifikasi, operasi dan ketersambungannya untuk aplikasi audio profesional. Ketahui tentang saluran input, EQ, dinamik, penghantaran bas, kesan, pemantauan, rakaman dan alat kawalan jauh.
Praview Manual Pengguna Pengadun Ekonomi Soundking KG16
Manual pengguna yang komprehensif untuk Pengadun Ekonomi Soundking KG16, memperincikan ciri, spesifikasi, operasi dan ketersambungannya untuk aplikasi audio profesional.
Praview Manual Pengguna Konsol Campuran Digital Soundking DB16
Manual pengguna yang komprehensif untuk konsol campuran digital Soundking DB16, DM4, DM8 dan DM16, memperincikan ciri, spesifikasi, arahan keselamatan dan panduan operasi.
Praview Manual Pengguna Pengadun Digital Soundking DX20
Manual pengguna yang komprehensif untuk Pengadun Digital Soundking DX20, memperincikan ciri, kawalan, operasi dan spesifikasinya untuk pencampuran audio profesional.
Praview Soundking CX-Series Line Array Column User Manual
Official user manual for Soundking's CX-Series line array column speakers, detailing product features, specifications, installation, safety, and system connection. Includes information on related KG-series mixers and AP-series audio processors.
Praview Manual Pengguna Set Drum Digital Soundking SD20/SD20M/SD20A/SD20AM
Manual pengguna untuk set dram digital Soundking SD20/SD20M/SD20A/SD20AM, meliputi persediaan, operasi, penyelesaian masalah dan spesifikasi.