Manual Peugeot Paris u'Select Manual Arahan Kilang Garam

pengenalan

Thank you for choosing the Peugeot Paris u'Select Manual Salt Mill. Crafted from natural beechwood with a durable stainless steel mechanism, this mill is designed to provide precise and consistent grinding for your culinary needs. Please read this manual carefully to ensure optimal performance and longevity of your salt mill.

The Peugeot Paris u'Select Manual Salt Mill, showcasing its elegant natural beechwood design.

Persediaan

Membongkar

Carefully remove the salt mill from its packaging. Inspect the mill for any signs of damage. Your mill comes partially filled with dry white salt for immediate use.

Refilling the Mill

1. Unscrew the top knob of the mill by turning it counter-clockwise.
2. Gently lift off the top wooden section of the mill.
3. Pour dry rock salt (maximum size 5/32-inch or 4mm) into the reservoir. Important: Only use dry rock salt. Do not use wet sea salt or any other spices, as this can damage the stainless steel mechanism.
4. Replace the top wooden section and screw the top knob back on clockwise until it is secure.

The top knob, which unscrews for refilling the salt mill.

The open top of the mill, ready for salt refill.

Operating the Salt Mill

Melaraskan Tetapan Grind (Sistem u'Select)

The Peugeot u'Select system allows you to precisely adjust the coarseness of your salt grind with six predefined settings, from extra fine (setting 1) to very coarse (setting 6). To adjust the grind:

1. Hold the upper body of the mill firmly.
2. Rotate the ring at the base of the mill to select your desired grind setting. The numbers on the base correspond to the coarseness (1 for finest, 6 for coarsest).

The base of the mill with the u'Select adjustment ring.

Grinding Salt

Once your desired grind setting is selected, simply twist the top section of the mill while holding the base to begin grinding. The two-stage mechanism first cracks and then grinds the salt to your chosen texture.

Proper hand placement for operating the salt mill.

The salt mill in action, adding freshly ground salt to a dish.

Penjagaan dan Penyelenggaraan

Pembersihan

• Lap bahagian luar kilang dengan kain kering dan lembut.
• Do not use cleaning agents or abrasive materials, as these can damage the wood finish.
• The mill is NOT dishwasher safe. Do not immerse the mill in water.

Penyimpanan

Store your salt mill in a dry environment. Avoid leaving it in areas with high humidity, such as directly next to a sink or stovetop, as moisture can affect the wood and the grinding mechanism.

Menyelesaikan masalah

• Salt not grinding or coming out:
  • Check if the mill needs refilling.
  • Ensure you are using dry rock salt. Wet or damp salt (like some sea salts) can clog the mechanism.
  • Verify the grind setting is not too fine for the type of salt being used. Try a coarser setting.
• Squeaking sound during grinding:
  • This can sometimes occur due to very dry salt or slight friction. Ensure the top knob is not overtightened.
  • If persistent, ensure the mill is clean and free of debris.

Spesifikasi

Waranti

The Peugeot grinding mechanism is backed by a lifetime guarantee. This warranty covers defects in materials and workmanship of the grinding mechanism under normal household use. For specific terms and conditions, please refer to the official Peugeot warranty information or contact customer support.

Peugeot's commitment to quality: Mechanism guaranteed for life.

Sokongan

For further assistance, questions, or to inquire about replacement parts, please visit the official Peugeot website or contact their customer service department. You can often find detailed FAQs and support resources online.

Lawati Peugeot Store on Amazon untuk maklumat lanjut dan produk.