1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the ABB ESB 20-20 230 Volt Contactor. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and to prevent potential hazards.
2. Produk Lebihview
The ABB ESB 20-20 is a robust motor contactor designed for switching electrical loads in various industrial and commercial applications. It features a 230 Volt coil and is rated for 20 Amperes, making it suitable for controlling motors, heating elements, lighting, and other electrical equipment.
Figure 1: ABB ESB 20-20 230 Volt Contactor. This image displays a white and grey ABB ESB 20-20 contactor, highlighting the A1 and A2 coil terminals at the top and bottom, respectively, and the main power terminals labeled 1, 3, 2, and 4. The ABB logo and model number are clearly visible on the front face of the unit.
3. Maklumat Keselamatan
WARNING: Electrical shock hazard. Installation and maintenance should only be performed by qualified and authorized personnel.
- Sentiasa putuskan sambungan kuasa sebelum memasang, menservis atau menanggalkan penyentuh.
- Pastikan semua pendawaian mematuhi kod elektrik tempatan dan nasional.
- Sahkan voltage and current ratings before connecting the contactor to a circuit.
- Jangan kendalikan kontaktor jika ia kelihatan rosak.
4. Persediaan dan Pemasangan
The ABB ESB 20-20 contactor is designed for DIN rail mounting, facilitating easy integration into control panels.
- Pemasangan: Securely attach the contactor to a standard 35mm DIN rail. Ensure it clicks firmly into place.
- Pendawaian Kuasa: Connect the main power circuit to terminals 1 and 3 (input) and terminals 2 and 4 (output). Ensure proper wire gauge for the 20A rating.
- Coil Wiring: Connect the 230 Volt control voltage to the coil terminals A1 and A2. Observe correct polarity if applicable, though AC coils are typically non-polar.
- Pengesahan: Double-check all connections for tightness and correct wiring according to your circuit diagram.
Refer to your specific application's wiring diagram for detailed connection instructions.
5. Arahan Operasi
The ESB 20-20 contactor operates by energizing its coil, which then closes the main power contacts, allowing current to flow through the connected load.
- Memberi tenaga kepada Gegelung: Apply 230 Volts AC to terminals A1 and A2. The contactor will audibly click as the contacts close.
- Menyahtenagakan Gegelung: Remove the 230 Volt AC supply from terminals A1 and A2. The contactor will audibly click as the contacts open, interrupting the power to the load.
- Penunjuk Status: Some models may include a visual indicator to show the contactor's state (open/closed).
6. Penyelenggaraan
Regular maintenance ensures the longevity and reliable operation of your ABB ESB 20-20 contactor.
- Pemeriksaan Visual: Periksa kontaktor secara berkala untuk sebarang tanda kerosakan fizikal, perubahan warna atau sambungan yang longgar.
- Pembersihan: Ensure the contactor is free from dust, dirt, and debris. Use a dry, soft cloth for cleaning. Do not use solvents.
- Semakan Sambungan: With power disconnected, verify that all terminal screws are tight. Loose connections can lead to overheating and failure.
7. Penyelesaian masalah
If the contactor is not functioning as expected, perform the following basic checks:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Penyentuh tidak memberi tenaga (tiada klik) | Tiada kawalan voltage to A1/A2; incorrect voltage; open coil circuit. | Check control circuit power supply; verify 230V at A1/A2; test coil continuity. |
| Penghubung memberi tenaga tetapi beban tidak menerima kuasa | Main power not connected; main contacts damaged; load circuit fault. | Check main power supply to terminals 1/3; inspect contacts for damage; check load wiring. |
| Kontaktor terlalu panas | Overcurrent; loose connections; incorrect voltage. | Verify load current is within 20A rating; tighten all connections; confirm 230V coil voltage. |
8. Spesifikasi
- Jenama: ABB
- model: ESB 20-20
- Nombor Model Item: ABB26326GSB
- Gegelung Voltage: 230 Volt AC
- Nilai Semasa: 20 Amperes
- Dimensi Produk: 3.94 x 0.79 x 3.94 inci
- Berat: 4.94 auns
- Suhu Operasi: -25°C to +55°C (as per typical specifications for this series)
- Pemasangan: Rel DIN
- Pengeluar: ABB
9. Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please contact your local ABB representative or visit the official ABB website. Keep your purchase receipt and product model number (ESB 20-20, ABB26326GSB) available when contacting support.
