Steinel IS 180-2

Manual Pengguna Pengesan Gerakan Inframerah Steinel IS 180-2

Model: IS 180-2

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Steinel IS 180-2 Infrared Motion Detector. Designed for both indoor and outdoor applications, this device offers reliable motion detection and automatic light control. Please read these instructions carefully before beginning installation or operation to ensure safe and efficient use.

2. Arahan Keselamatan

Amaran: Incorrect installation can lead to electric shock, fire, or other hazards. Always ensure that installation is performed by a qualified electrician in accordance with national wiring regulations and local electrical codes.

  • Disconnect power at the main circuit breaker before installation or maintenance.
  • Jangan buka produk casing unless specifically instructed. There are no user-serviceable parts inside.
  • Ensure the product is securely mounted to prevent it from falling.
  • Jauhkan kanak-kanak daripada peranti elektrik.

3. Produk Lebihview

The Steinel IS 180-2 is an elegant infrared motion detector combining advanced sensor technology with a modern design. It is equipped with two highly sensitive infrared detectors to provide reliable, uninterrupted all-round protection.

Depan view of the Steinel IS 180-2 Infrared Motion Detector in silver.

Rajah 3.1: Depan view of the Steinel IS 180-2 Infrared Motion Detector, showcasing its sleek silver finish and integrated sensor lens.

Steinel IS 180-2 product packaging and contents, including the sensor, manual, screws, and corner mount.

Figure 3.2: The Steinel IS 180-2 package contents, including the motion detector, quick start guide, mounting screws, and a corner wall mount accessory.

Graphic summarizing key features of the Steinel IS 180-2: 350W max LED, 180 degree infrared sensor, 12m max range, IP54 rating, plastic-free packaging, 2-2000 lux twilight, 5 sec - 15 min time setting, and a QR code for AR view.

Figure 3.3: Key features of the IS 180-2, including its 180° infrared sensor, maximum 12m range, IP54 weather protection, and adjustable time and twilight settings. For an augmented reality view of the product, scan the QR code or visit pautan ini.

belakang view of the Steinel IS 180-2 motion detector, showing mounting holes and wiring access.

Rajah 3.4: Belakang view of the motion detector, illustrating the mounting points and the area for electrical connections.

4. Pemasangan dan Pemasangan

The Steinel IS 180-2 is designed for wall mounting and includes a corner wall mount for flexible installation. Ensure the mounting surface is stable and suitable for the device's weight.

4.1 Lokasi Pemasangan

Choose a location that provides the desired detection coverage. The sensor offers a 180° detection angle and a maximum range of 12 meters. Avoid mounting near heat sources or objects that might cause false triggers (e.g., moving branches, direct sunlight).

Steinel IS 180-2 motion detector mounted on a white exterior wall.

Figure 4.1: The IS 180-2 mounted on an exterior wall, demonstrating a typical installation scenario.

4.2 Zon Pengesanan

The detection zone can be adjusted to suit specific requirements. The sensor provides coverage for areas as large as 200 m².

Diagram illustrating the 180-degree detection area of the motion sensor from an aerial perspective, covering a wide arc around a building.

Rajah 4.2: Overhed view of the 180° detection zone, showing how the sensor covers a broad area in front of a building.

Diagram showing detection patterns for wall and corner mounting, indicating a 180-degree, 12-meter range.

Figure 4.3: Illustration of detection patterns for both flat wall and corner mounting, highlighting the 180° coverage and 12m range.

Gambar rajah menunjukkan sisi view of the detection range, illustrating how the sensor detects movement at different distances and heights.

Rajah 4.4: Sisi view diagram detailing the sensor's detection range, showing its ability to detect movement across various distances and vertical angles.

5. Arahan Operasi

The Steinel IS 180-2 operates by detecting infrared radiation (heat) emitted by moving objects. When motion is detected within its adjustable range and the ambient light level falls below the set twilight threshold, the connected light source will activate for the set duration.

6. Pelarasan

The motion detector features control dials for fine-tuning its operation. These dials are typically located behind the sensor lens or on the underside of the unit.

jarak dekat view of the control dials on the Steinel IS 180-2 for adjusting time and twilight settings.

Figure 6.1: Control dials for adjusting the time and twilight threshold settings of the motion detector.

  • Tetapan Masa: This dial adjusts how long the light remains on after motion is detected. It can be infinitely varied from approximately 5 seconds to 15 minutes.
  • Twilight Threshold: This dial sets the ambient light level at which the sensor becomes active. It can be adjusted from approximately 2 lux (dark) to 2000 lux (daylight).
  • Pelarasan Jangkauan: The reach of the motion sensor can be set to a maximum of 12 meters or reduced to 5 meters by turning the multi-lens. Shrouds are also provided to limit the detection zone and match it to specific situations, preventing unwanted triggers.

7. Penyelenggaraan

The Steinel IS 180-2 motion detector requires minimal maintenance. To ensure optimal performance:

  • Bersihkan kanta sensor secara berkala dengan kain lembutamp cloth to remove dust or dirt that may obstruct detection. Do not use abrasive cleaners or solvents.
  • Ensure the area around the sensor remains clear of obstructions that could block its field of view or cause false triggers.
  • No internal maintenance or lubrication is required.

8. Penyelesaian masalah

If your Steinel IS 180-2 is not functioning as expected, consult the following table for common issues and solutions:

MasalahKemungkinan PuncaPenyelesaian
Lampu kekal menyala secara berterusan.Continuous motion in detection zone; Time setting too long; Wiring fault.Remove obstructions; Adjust time setting; Check wiring.
Light does not switch on.No power; Twilight setting too high; Sensor lens obstructed; Faulty bulb.Check power supply; Adjust twilight setting; Clean lens; Replace bulb.
False triggers.Heat sources (e.g., vents, animals); Detection zone too wide.Relocate sensor; Adjust reach using shrouds or multi-lens.

9. Spesifikasi

Technical drawing with dimensions of the Steinel IS 180-2 motion detector.

Figure 9.1: Technical drawing showing the dimensions of the Steinel IS 180-2 in millimeters.

CiriPerincian
JenamaSteinel
ModelIS 180-2
Sumber KuasaElektrik Bertali
Voltage230 Volt
Maks. Kapasiti Penukaran1000 Watts (Max. 350 W LED)
Sudut Pengesanan180°
Maks. Julat12 Meter
Tetapan Senja2 – 2000 Lux
Penetapan Masa5 saat - 15 minit
Jenis PemasanganLekap di dinding
Penilaian PerlindunganIP54
Berat Barang170 Gram (lebih kurang 6 auns)
Dimensi Produk4.72 x 2.99 x 2.2 inci (lebih kurang 120 x 77 x 55 mm)

10. Waranti dan Sokongan

The Steinel IS 180-2 Infrared Motion Detector comes with a 3-year manufacturer's warranty. For warranty claims or technical support, please contact Steinel customer service or visit their official webtapak.

Untuk maklumat lanjut, sila layari: www.steinel.de/garantie

Dokumen Berkaitan - IS 180-2

Praview Manual Pemasangan Sensor Gerakan Inframerah STEINEL IS 2180 ECO
Pemasangan dan manual pengguna untuk sensor gerakan inframerah STEINEL IS 2180 ECO. Perincian ciri, spesifikasi teknikal, pemasangan dan penyelesaian masalah untuk kawalan pencahayaan automatik yang andal.
Praview STEINEL IS 2180-2 Infrarot-Bewegungsmelder: Montageanleitung und technische Informationen
Umfassende Montageanleitung für den STEINEL IS 2180-2 Infrarot-Bewegungsmelder. Tarikh technische Enthält, Installationsschritte, Funktionsbeschreibungen, Fehlerbehebung und Garantieinformationen. Das Dokumen adalah dalam mehreren Sprachen verfügbar, mit Fokus auf Deutsch.
Praview Steinel NightmatIQ & NightmatIQ Plus Panduan Mula Pantas | Sensor Senja
Panduan permulaan pantas untuk penderia senja Steinel NightmatIQ dan NightmatIQ Plus. Ketahui tentang pemasangan, spesifikasi teknikal dan ciri untuk kawalan pencahayaan pintar.
Praview Pengesan Gerakan Siling Inframerah ECO STEINEL IS 2360-3 | Spesifikasi & Pendawaian
Maklumat terperinci tentang pengesan gerakan siling inframerah STEINEL IS 2360-3 ECO, termasuk ciri-cirinya, spesifikasi teknikal, zon pengesanan dan gambar rajah pendawaian untuk pemasangan dan pengendalian.
Praview Manual Pemasangan Sensor Gerakan Inframerah STEINEL IS 2180-2
Panduan komprehensif untuk memasang dan mengendalikan sensor gerakan inframerah STEINEL IS 2180-2, yang menampilkan julat, masa dan kepekaan cahaya yang boleh laras untuk kawalan pencahayaan yang andal.
Praview Panduan Sensor STEINEL: Laluan Pantas ke Sensor yang Tepat untuk Aplikasi Anda
Temui penyelesaian sensor dan pencahayaan optimum STEINEL untuk setiap ruang. Panduan ini memperincikan pelbagai teknologi sensor (PIR, HF, US, Optik) dan aplikasinya dalam persekitaran dalaman dan luaran, membantu anda mencari sensor yang ideal untuk sebarang situasi.