1. Pengenalan dan Lebihview
Thank you for choosing the Steinel BRS 66 L Motion Sensor Bathroom Light. This high-quality luminaire is designed for automatic illumination in bathrooms and other suitable indoor/outdoor areas, offering convenience and energy efficiency. Featuring a high-frequency sensor with 360° detection, an elegant aluminum chassis, and an opal glass globe, this light is rated IP44, making it splash-proof and ideal for damp persekitaran.
Figure 1: The Steinel BRS 66 L light seamlessly integrated into a modern bathroom setting.
2. Arahan Keselamatan
- Pemasangan Elektrik: Pemasangan mesti dilakukan oleh juruelektrik bertauliah mengikut peraturan pendawaian kebangsaan dan kod elektrik tempatan.
- Pemutusan Kuasa: Always disconnect the power supply at the main fuse box before commencing any installation, maintenance, or repair work.
- Voltage: Pastikan bekalan voltage matches the specifications of the luminaire.
- Penilaian IP44: This product is rated IP44, meaning it is protected against solid objects over 1mm and against splashing water from any direction. It is suitable for bathroom zones 2 and 3. Do not install in bathroom zone 1 (directly above bath/shower).
- Jenis Mentol: Use only G9 halogen bulbs with a maximum wattagkuasa 40W. Jangan melebihi kuasa yang ditetapkantage.
- haba: Halogen bulbs generate heat. Ensure adequate ventilation and do not cover the luminaire.
3. Kandungan Pakej
Please check that all parts are present and undamaged:
- Steinel BRS 66 L Luminaire (with integrated sensor)
- Perkakasan pemasangan (skru, palam dinding)
- Manual Arahan
4. Persediaan dan Pemasangan
Ikuti langkah ini untuk pemasangan yang selamat dan betul:
- Sediakan untuk Pemasangan: Pastikan bekalan kuasa utama ke kawasan pemasangan dimatikan pada pemutus litar.
- Memasang Pangkalan: Mark the drilling points on the wall or ceiling using the luminaire's base as a template. Drill holes and insert the provided wall plugs. Secure the luminaire's mounting base to the surface using the screws.
- Pendawaian: Connect the electrical wires (Live, Neutral, Earth) from your mains supply to the corresponding terminals on the luminaire's terminal block. Ensure all connections are secure and correctly insulated.
- Attach the Luminaire Body: Carefully attach the main body of the luminaire to the mounting base, ensuring it is securely fastened.
- Masukkan Mentol: Gently insert two G9 halogen bulbs (max. 40W each) into their respective sockets.
- Attach Glass Globe: Carefully place the opal glass globe over the bulbs and secure it according to the fixture's design (e.g., by twisting or using retaining clips).
- Pulihkan Kuasa: Once installation is complete and all parts are securely in place, restore power at the circuit breaker.
Figure 2: The high-frequency sensor provides 360° detection, indicated by the wave pattern.
Figure 3: Key features of the BRS 66 L, including its high-frequency sensor and IP44 protection.
5. Arahan Operasi
The Steinel BRS 66 L features an integrated high-frequency motion sensor for automatic operation.
- Hidup/Mati Automatik: Once power is supplied, the light will automatically turn on when motion is detected within its 360° detection zone and turn off after a set delay when no further motion is detected.
- Pelarasan Sensor: The sensor's sensitivity (reach) and twilight threshold (when the light should activate based on ambient light) can be adjusted. These adjustments are typically made via small dials or switches located on the sensor unit, often accessible by carefully removing the glass globe. Refer to the detailed diagrams in the full manual for precise locations.
- Peletakan Optimum: For best performance, ensure the light is placed where its 360° detection field is not obstructed by large objects.
6. Penyelenggaraan
- Pembersihan: To clean the luminaire, ensure the power is disconnected. Use a soft, damp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan kemasan atau kaca.
- Penggantian mentol: If a bulb fails, disconnect the power supply. Carefully remove the glass globe and then the faulty G9 bulb. Insert a new G9 halogen bulb (max. 40W). Reattach the glass globe and restore power.
- Pemeriksaan biasa: Periodically check the mounting screws for tightness and the electrical connections for any signs of wear or damage.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tiada bekalan kuasa. Mentol rosak. Sensor settings incorrect (e.g., twilight threshold too high). | Periksa pemutus litar dan pendawaian. Ganti mentol. Adjust sensor's twilight setting. |
| Lampu kekal menyala secara berterusan. | Pergerakan berterusan dikesan. Sensor rosak. Kesalahan pendawaian. | Check for continuous movement in detection zone. Contact customer support if sensor is suspected faulty. Sahkan sambungan pendawaian. |
| Light turns on too frequently/not frequently enough. | Sensor sensitivity (reach) set too high/low. | Adjust the sensor's sensitivity dial to decrease or increase detection range. |
| Cahaya berkelip-kelip. | Sambungan longgar. Mentol tidak serasi. Turun naik kuasa. | Periksa sambungan pendawaian. Ensure correct G9 halogen bulb is used. Consult an electrician if power fluctuations are suspected. |
8. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | BRS 66 |
| Jenama | Steinel |
| Indeks Perlindungan | IP44 |
| bahan | Aluminum chassis, Opal glass globe |
| Jenis Selesai | Chrome |
| Bilangan Mentol | 2 |
| Max. Electrical Power | 40 Watts per bulb (Total 80W) |
| Jenis Mentol | Halogen |
| Jenis Soket | G9 |
| Ciri-ciri Mentol | Hidup/Mati Automatik |
| Jenis Sensor | High-frequency motion sensor |
| Sudut Pengesanan | 360° |
| Kegunaan Khusus | Indoor and Outdoor (Bathroom, Hallway, etc.) |
| Berat Produk | 1.28 kg |
9. Waranti dan Sokongan
Steinel products are manufactured to the highest quality standards. For information regarding the warranty period and terms, please refer to the documentation provided with your purchase or visit the official Steinel website. For technical support, spare parts, or service inquiries, please contact your local Steinel dealer or customer service department. Always provide the model number (BRS 66) when seeking support.
