TFA Digital Comfort Control Thermo-Hygrometer
Model: 30.5011
pengenalan
This manual provides detailed instructions for the setup, operation, and maintenance of your TFA Digital Comfort Control Thermo-Hygrometer Model 30.5011. This device is designed to monitor indoor temperature and humidity levels, display dew point, and alert you to potential mold risk, helping you maintain a comfortable and healthy indoor environment.
Maklumat Keselamatan
- Jangan dedahkan peranti kepada suhu yang melampau, cahaya matahari langsung atau kelembapan yang tinggi.
- Elakkan daripada menjatuhkan peranti atau terkena impak yang kuat.
- Jangan cuba membuka atau membaiki peranti sendiri. Hubungi kakitangan yang berkelayakan untuk perkhidmatan.
- Keep batteries out of reach of children. Dispose of used batteries properly according to local regulations.
- Tanggalkan bateri jika peranti tidak akan digunakan untuk tempoh yang lama untuk mengelakkan kebocoran.
Kandungan Pakej
Sila pastikan semua item ada dan dalam keadaan baik:
- TFA Digital Comfort Control Thermo-Hygrometer (Model 30.5011)
- Dudukan Boleh Tanggalkan
- Manual Arahan (dokumen ini)
Note: 2 AA batteries are required for operation and may be included depending on the retailer.
Peranti Lebihview
The TFA Digital Comfort Control Thermo-Hygrometer features a clear display and intuitive controls for monitoring your indoor climate.
Image: The TFA Digital Comfort Control Thermo-Hygrometer (Model 30.5011) shown on a table, displaying current humidity (69%), temperature (18.1°C), and dew point (10.0°C). A red indicator light for mold risk is visible.
Paparan Hadapan:
- Paparan Kelembapan: Menunjukkan kelembapan relatif semasa dalam peratustage (%).
- Paparan suhu: Shows current temperature in Celsius (°C) or Fahrenheit (°F).
- Dew Point Display: Shows the dew point temperature.
- Penunjuk Risiko Acuan: A visual alarm (flashing light) and optional audio alarm indicate when humidity levels exceed a set threshold, signaling a risk of mold formation.
- MIN/MAX Indicator: Shows minimum or maximum recorded values.
Back/Side Controls:
- MIN/MAX Button: Tekan untuk view minimum/maximum recorded temperature, humidity, and dew point. Press and hold to reset these values.
- Butang °C/°F: Switch between Celsius and Fahrenheit temperature display.
- Butang SET: Used to enter settings mode for mold alarm thresholds and audio alarm.
- Petak Bateri: Terletak di bahagian belakang, untuk 2 bateri AA.
- Stand Slot: For attaching the detachable stand.
Persediaan
1. Pemasangan Bateri
- Cari penutup petak bateri di bahagian belakang peranti.
- Luncurkan atau buka klip penutup untuk membuka petak.
- Masukkan dua (2) bateri AA, pastikan kekutuban (+ dan -) yang betul seperti yang ditunjukkan di dalam petak.
- Gantikan penutup petak bateri dengan selamat.
- The device will power on automatically and begin displaying current temperature and humidity.
2. penempatan
Place the thermo-hygrometer on a flat surface using its detachable stand. For accurate readings, choose a location away from direct sunlight, heat sources, air conditioning vents, and areas with high airflow. Avoid placing it near windows or doors where external conditions might influence readings.
Arahan Operasi
Viewing Minimum and Maximum Values
- Tekan ke MIN / MAX button once to display the maximum recorded temperature, humidity, and dew point since the last reset.
- Tekan ke MIN / MAX button again to display the minimum recorded values.
- Tekan ke MIN / MAX button a third time to return to current readings.
- To reset the MIN/MAX values, press and hold the MIN / MAX butang selama lebih kurang 3 saat sementara viewing either MIN or MAX values. The display will flash, indicating the values have been reset.
Changing Temperature Unit (°C/°F)
Tekan ke ° C / ° F button located on the back or side of the device to switch between Celsius and Fahrenheit temperature units.
Setting Mold Alarm Thresholds and Audio Alarm
The device features a visual and optional audio alarm to indicate high humidity levels that could lead to mold growth. The threshold can typically be set to 55%, 60%, or 65% relative humidity.
- Tekan dan tahan butang SET button for approximately 3 seconds to enter the alarm setting mode.
- The current humidity threshold will flash. Use the MIN / MAX button to cycle through available thresholds (e.g., 55%, 60%, 65%).
- Tekan SET again to confirm the humidity threshold and move to the audio alarm setting.
- Gunakan MIN / MAX button to toggle the audio alarm ON or OFF.
- Tekan SET one more time to save your settings and exit the alarm setting mode.
When the humidity exceeds the set threshold, the red mold risk indicator light will flash. If the audio alarm is enabled, it will also sound.
Penyelenggaraan
Pembersihan
Lap peranti dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan paparan atauasing. Pastikan tiada kelembapan memasuki peranti.
Penggantian Bateri
When the battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps outlined in the Setup section. Always replace both batteries at the same time with new AA batteries.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada paparan atau paparan samar | Bateri mati atau tidak dipasang dengan betul. | Gantikan bateri dengan bateri AA baharu, memastikan kekutuban yang betul. |
| Bacaan tidak tepat | Device placed in an unsuitable location (e.g., near heat source, direct sunlight, vent). | Pindahkan peranti ke persekitaran dalaman yang stabil, jauh daripada keadaan yang ekstrem. Berikan masa untuk bacaan stabil. |
| Mold alarm constantly flashing/sounding | High humidity in the environment; alarm threshold set too low. | Ventilate the room to reduce humidity. Adjust the mold alarm threshold to a higher percentage if desired (refer to "Setting Mold Alarm Thresholds"). |
| MIN/MAX values not resetting | Butang tidak dipegang cukup lama. | Ensure you press and hold the MIN/MAX button for approximately 3 seconds while viewing MIN or MAX values. |
Spesifikasi
- model: 30.5011
- Jenama: TFA
- Julat Suhu: -10°C hingga 60°C (14°F hingga 140°F)
- Julat Kelembapan Relatif: 1% hingga 99%
- Kuasa: 2 x bateri AA (1.5V)
- Dimensi: 3.74 x 0.98 x 3.74 inci (9.5 x 2.5 x 9.5 cm)
- Berat: 3.17 auns (90 gram)
- Jenis Pemasangan: Atas meja
Waranti dan Sokongan
Untuk maklumat waranti atau sokongan teknikal, sila rujuk dokumentasi yang diberikan semasa pembelian atau hubungi peruncit anda. Simpan resit pembelian anda sebagai bukti pembelian.