Puig 1665N Black Racing Screen Instruction Manual

pengenalan

This manual provides essential instructions for the proper installation, use, and maintenance of your Puig 1665N Black Racing Screen. Designed for motorcycles, this high-impact acrylic screen offers enhanced aerodynamics and rider protection. Please read this manual thoroughly before installation and retain it for future reference.

Maklumat Keselamatan

Always prioritize safety. Improper installation or maintenance can lead to serious injury or damage.

• Ensure the motorcycle is stable and turned off before beginning any work.
• Pakai peralatan pelindung diri yang sesuai, seperti sarung tangan dan pelindung mata.
• Jika anda tidak pasti tentang sebarang langkah, rujuk mekanik motosikal bertauliah.
• Do not overtighten fasteners, as this can damage the screen or mounting points.
• Regularly inspect the screen and mounting hardware for signs of wear or looseness.

Kandungan Pakej

Verify that all components are present before starting installation.

• 1x Puig 1665N Black Racing Screen
• Mounting Hardware Kit (screws, washers, spacers - assumed components)

Persediaan dan Pemasangan

This section outlines the general procedure for installing the Puig 1665N Racing Screen. Specific steps may vary slightly depending on your motorcycle model.

1. Sediakan Motosikal:

   Park the motorcycle on a level surface using its center stand or a paddock stand for stability. Ensure the engine is off and cool.

2. Remove Existing Windshield (if applicable):

   Carefully remove the bolts securing the original windshield. Retain any original hardware that may be reused.

3. Position the New Screen:

   Align the Puig 1665N Racing Screen with the mounting holes on your motorcycle's fairing.

   

   This image shows the Puig 1665N Black Racing Screen mounted on a black Suzuki motorcycle, illustrating its integrated appearance.

4. Secure the Screen:

   Insert the provided mounting screws (or original screws if reused) through the screen and into the fairing. Hand-tighten all screws initially.

   

   Imej ini menyediakan pro sampinganfile of the Puig 1665N Black Racing Screen, highlighting its aerodynamic curve.
5. Pengetatan Akhir:

   Once all screws are in place and aligned, progressively tighten them using appropriate tools. Do not overtighten. Ensure the screen is securely fastened but not stressed.

   

   This image displays a front view of the Puig 1665N Black Racing Screen, showcasing its distinct shape and dark tint.

6. Semakan Selepas Pemasangan:

   Gently attempt to move the screen to confirm it is firmly attached. Check for any gaps or misalignments.

Pertimbangan Operasi

The Puig 1665N Racing Screen is designed to improve aerodynamics and rider comfort.

• The "race bubble" design helps to diminish air effect on the rider's helmet, especially at higher speeds.
• Be aware that the dark tint of the screen may reduce visibility through it, particularly in low-light conditions. Always look over the screen, not through it, when riding.

Penyelenggaraan

Proper care will extend the life and maintain the appearance of your racing screen.

• Pembersihan:

  Use only mild soap and water with a soft, non-abrasive cloth. Avoid harsh chemicals, ammonia-based cleaners, or abrasive materials, as these can scratch or damage the acrylic. Rinse thoroughly and dry with a clean, soft cloth.

• Pemeriksaan:

  Periodically check all mounting hardware for tightness. Inspect the screen for cracks, deep scratches, or signs of fatigue. Replace the screen if significant damage is present.

Menyelesaikan masalah

• Getaran Berlebihan:

  Ensure all mounting screws are securely tightened. Check for any loose fairing components.

• Loose Fit:

  Re-check all mounting points and ensure the correct hardware is used. Verify that the screen is properly seated.
• Scratches or Damage:

  Minor scratches may sometimes be polished out with specialized acrylic polish. For significant damage, replacement is recommended.

Spesifikasi

• model: 1665N
• Jenama: puig
• Bahan: High-impact Acrylic (3mm thickness)
• warna: Hitam
• Dimensi: Kira-kira 18 x 16 x 6 inci
• Berat Barang: Lebih kurang 1 paun
• Negara Asal: Sepanyol

Waranti dan Sokongan

For warranty information or technical support, please refer to the official Puig website or contact your authorized Puig dealer. Retain your proof of purchase for warranty claims.

Maklumat Hubungan

For further assistance, please visit the official Puig webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

www.puig.tv