Manual Pengguna Peti Sejuk Tegak Liebherr GNP 2476 Premium NoFrost

1. Pengenalan

Thank you for choosing a Liebherr appliance. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Liebherr GNP 2476 Premium NoFrost Upright Freezer. Please read these instructions carefully before using the appliance for the first time to ensure proper function and to prevent damage.

The Liebherr GNP 2476 is a freestanding upright freezer featuring NoFrost technology, designed to provide optimal freezing conditions and convenience by preventing ice build-up.

2. Arahan Keselamatan

• Keselamatan Elektrik: Pastikan perkakas disambungkan ke soket yang dibumikan dengan betul. Jangan gunakan kord sambungan atau penyesuai berbilang soket. Putuskan sambungan daripada kuasa sebelum pembersihan atau penyelenggaraan.
• Pengudaraan: Maintain adequate ventilation around the appliance as specified in the setup section to prevent overheating and ensure efficient operation.
• Bahan mudah terbakar: Do not store explosive substances or products containing flammable propellants (e.g., spray cans) inside the appliance.
• Kanak-kanak: Jauhkan kanak-kanak daripada bahan pembungkusan. Awasi kanak-kanak untuk memastikan mereka tidak bermain dengan perkakas.
• kerosakan: If the appliance is damaged, especially the power cable, do not operate it. Contact customer service immediately.
• Pelupusan: Dispose of the appliance responsibly at the end of its service life, following local regulations for recycling refrigerants and insulation materials.

3. Persediaan

3.1 Membongkar

Carefully remove all packaging materials. Retain packaging for potential future transport or return. Inspect the appliance for any transport damage.

3.2 Penempatan

• Place the appliance on a firm, level floor. Use the adjustable feet to ensure stability and levelness.
• Avoid direct sunlight and proximity to heat sources such as ovens, radiators, or dishwashers.
• Ensure sufficient ventilation. Leave a minimum clearance of 5 cm at the sides and rear of the appliance for air circulation.
• Do not install the appliance in areas where the ambient temperature is likely to fall below the climate class specified on the rating plate.

3.3 Sambungan Elektrik

After positioning the appliance, wait for at least 4 hours before plugging it into the mains power supply. This allows the refrigerant to settle. Connect the appliance to a 230V AC, 50Hz earthed socket. Ensure the voltage dan kekerapan sepadan dengan spesifikasi pada plat penarafan.

3.4 Permulaan Awal

Once connected, the appliance will begin to cool. Set the desired temperature using the control panel. Allow the freezer to operate for several hours (e.g., 12-24 hours) before loading it with food, to ensure it reaches the optimal freezing temperature.

This image displays the Liebherr GNP 2476 upright freezer. The door is open, revealing six transparent freezer drawers. The top drawer is smaller, while the lower five are larger, designed for organized storage of frozen items. The control panel is visible at the top of the appliance.

4. Arahan Operasi

4.1 Kawalan Suhu

The temperature is set via the electronic control panel located at the top of the appliance. Use the '+' and '-' buttons to adjust the desired temperature. The display will show the current temperature inside the freezer. For optimal food preservation, a temperature of -18°C (0°F) or colder is recommended.

4.2 Sistem NoFrost

Your Liebherr GNP 2476 is equipped with NoFrost technology. This system prevents the formation of ice and frost inside the freezer compartment by circulating cold air and expelling humidity. This eliminates the need for manual defrosting, saving you time and ensuring consistent freezing performance.

4.3 Membekukan Makanan Segar

• Hanya bekukan makanan segar dan tidak rosak.
• Package food in airtight containers or freezer bags to prevent dehydration and flavor transfer.
• Do not place warm food directly into the freezer; allow it to cool down first.
• Distribute fresh food evenly across the drawers to allow for proper air circulation.
• Avoid placing large quantities of fresh food at once, as this can temporarily raise the internal temperature. Refer to the appliance's freezing capacity (e.g., 18 kg/24h) for guidance.

5. Penyelenggaraan

5.1 Pembersihan

• Sebelum Pembersihan: Sentiasa cabut plag perkakas daripada salur keluar kuasa.
• Dalaman: Clean the interior regularly with a soft cloth and a mild, food-safe cleaning solution (e.g., lukewarm water with a little vinegar or mild dish soap). Avoid abrasive cleaners or solvents. Dry thoroughly.
• Luaran: Lap permukaan luar dengan lembut, damp kain. Untuk model keluli tahan karat, gunakan pembersih keluli tahan karat khusus.
• Pengedap Pintu: Keep the door seal clean to ensure a tight closure and energy efficiency.
• Condenser (Rear): Periodically vacuum the condenser coils at the back of the appliance to remove dust and lint, which can impede cooling efficiency.

5.2 Menyahbeku

Thanks to the NoFrost technology, your Liebherr GNP 2476 freezer automatically defrosts. This means you do not need to manually defrost the appliance. Any accumulated frost is periodically melted and evaporated, keeping the freezer compartment free of ice.

6. Penyelesaian masalah

Sebelum menghubungi perkhidmatan pelanggan, sila semak isu biasa berikut:

• Perkakas tidak menyejukkan: Check if the power plug is securely inserted and if the circuit breaker has tripped. Ensure the temperature setting is correct.
• Bunyi luar biasa: Minor operating noises are normal. Check if the appliance is level and not touching a wall or other furniture.
• Excessive ice formation (if not NoFrost): Ensure the door is closing properly and the seal is intact. Avoid leaving the door open for extended periods. (Note: This model is NoFrost, so this issue should not occur significantly).
• Pintu tidak menutup dengan betul: Check for obstructions, ensure drawers are fully pushed in, and inspect the door seal for damage or dirt.

If the problem persists after checking these points, please contact Liebherr customer service or a qualified technician.

7. Spesifikasi

8. Waranti dan Sokongan

Untuk maklumat jaminan, sila rujuk kad jaminan yang disertakan dengan perkakas anda atau lawati cawangan rasmi Liebherr. website. In case of technical issues or if you require spare parts, please contact Liebherr customer service or your authorized dealer. When contacting support, have your model number (GNP 2476-20) and serial number ready, which can be found on the rating plate inside the appliance.

For further assistance, you may visit the official Liebherr webtapak: rumah.liebherr.com