1. Pengenalan
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Lanzar RBHTG414 Heritage 600 Watt 4-Channel MOSFET Amplifier. To ensure optimal performance and safety, please read this manual thoroughly before attempting to install or operate the amppengikat. Simpan manual ini untuk rujukan masa hadapan.
2. Arahan Keselamatan
Sentiasa patuhi langkah berjaga-jaga keselamatan berikut semasa pemasangan dan operasi:
- Disconnect the vehicle's negative battery terminal before beginning any installation work to prevent electrical shorts.
- Ensure all wiring is properly routed and secured to prevent damage from sharp edges or moving parts.
- Gunakan pendawaian tolok yang sesuai untuk sambungan kuasa dan pembumian seperti yang dinyatakan dalam bahagian pemasangan.
- Pasangkan amppemanas di lokasi yang membolehkan pengudaraan yang mencukupi bagi mengelakkan kepanasan melampau.
- Elakkan memasang amppenghawa dingin di kawasan yang terdedah kepada kelembapan atau getaran berlebihan.
- Jangan cuba membaiki atau mengubah suai amplifier yourself. Refer all servicing to qualified personnel.
3. Produk Lebihview
The Lanzar RBHTG414 Heritage amplifier is a 600 Watt, 4-channel MOSFET amplifier designed to deliver powerful and clear audio performance for your car audio system. It features a regulated MOSFET power supply and is bridgeable, offering flexible configuration options for various speaker setups.
4. Persediaan dan Pemasangan
Pemasangan yang betul adalah penting untuk prestasi dan jangka hayat peranti anda amplifier. The Lanzar RBHTG414 is designed for surface mounting.
4.1 Senarai Semak Pra-Pemasangan
- Ensure you have all necessary tools and wiring kits (power wire, ground wire, remote turn-on wire, RCA cables, speaker wire, fuses, terminals).
- Choose a mounting location that is dry, well-ventilated, and secure.
- Plan your wiring routes to avoid interference and potential damage.
4.2 Sambungan Pendawaian
The following outlines general wiring procedures. Consult a professional installer if you are unsure about any steps.
- Power Connection (BATT+): Connect a heavy-gauge power cable (e.g., 8-gauge or 4-gauge depending on total system power) directly from the vehicle's positive battery terminal to the amplifier's BATT+ terminal. Install an in-line fuse holder within 18 inches (45 cm) of the battery.
- Sambungan Tanah (GND): Connect a heavy-gauge ground cable of the same length as the power cable from the ampterminal GND liifier ke permukaan logam yang bersih dan tidak dicat pada casis kenderaan. Pastikan sambungan yang kukuh dan berrintangan rendah.
- Remote Turn-On (REM): Connect a smaller gauge wire (e.g., 18-gauge) from the amplifier's REM terminal to the remote turn-on output of your head unit. This wire signals the amplifier to turn on and off with your car's audio system.
- Sambungan Input RCA: Connect RCA audio cables from your head unit's pre-amp output kepada amplifier's RCA input jacks. For 4-channel operation, use two pairs of RCA cables (Front L/R, Rear L/R).
- Sambungan Pembesar Suara: Connect your speakers to the ampTerminal output pembesar suara lifier.
- 4-Channel Stereo Mode: Connect each speaker to its corresponding channel output (e.g., Front Left speaker to CH1+, CH1-, Front Right to CH2+, CH2-, etc.).
- Bridged Mode (2-Channel): For higher power output to subwoofers or a pair of speakers, the RBHTG414 can be bridged. Refer to the amplifier's terminal markings for specific bridged connection points (typically CH1+ and CH2- for one bridged channel, and CH3+ and CH4- for the second). Ensure your speakers are rated for the increased power output in bridged mode.
4.3 Pemasangan
Pasang dengan selamat amplifier to a solid surface using appropriate screws. Ensure there is sufficient space around the amplifier for air circulation, especially around the heat sink fins, to prevent thermal shutdown.
5. Arahan Operasi
Setelah dipasang, amplifier will turn on automatically with your head unit. Adjustments should be made carefully to achieve optimal sound quality.
- Dapatkan Kawalan: The gain control matches the amplifier's input sensitivity to the output level of your head unit. Start with the gain set to minimum, then slowly increase it until you hear distortion, then back off slightly. This is not a volume control.
- Tetapan Crossover: Jika anda amplifier includes crossover controls (e.g., High-Pass Filter (HPF), Low-Pass Filter (LPF)), adjust them according to your speaker type. HPF is used for full-range speakers to block low frequencies, while LPF is used for subwoofers to block high frequencies.
- Bass Boost: Use the bass boost feature sparingly, if available, as excessive boosting can lead to distortion and potential speaker damage.
6. Penyelenggaraan
Penyelenggaraan tetap membantu memastikan umur panjang dan prestasi anda amplebih hidup.
- Pembersihan: Bersihkan secara berkala amplifier's exterior with a soft, dry cloth. Ensure the heat sink fins are free of dust and debris to maintain proper cooling.
- Sambungan: Occasionally check all wiring connections for tightness and corrosion. Loose connections can cause poor performance or damage.
- Pengudaraan: Memastikan bahawa amplifier's mounting location remains clear of obstructions that could impede airflow.
7. Penyelesaian masalah
Jika anda mengalami masalah dengan anda amplifier, refer to the following common problems and solutions before seeking professional service.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Amppenyangga tidak dihidupkan | Blown fuse; loose power/ground/remote wire; no power from head unit remote output. | Periksa fius dalam talian dan amplifier fuses; verify all power, ground, and remote connections are secure; test remote wire for 12V when head unit is on. |
| Tiada keluaran bunyi | Kabel RCA longgar; tetapan gandaan salah; wayar pembesar suara terputus; amppenguat dalam mod perlindungan. | Check RCA connections at both amplifier and head unit; ensure gain is set correctly; verify speaker wire connections; check for protect light indicator. |
| Bunyi herot | Gain set too high; improper crossover settings; damaged speaker; poor ground connection. | Reduce gain setting; adjust crossover filters; inspect speakers for damage; ensure ground connection is solid. |
| Ampliifier terlalu panas | Insufficient ventilation; impedance mismatch; prolonged high-power operation. | Pastikan aliran udara yang mencukupi di sekeliling amppenghidup; sahkan padanan impedans pembesar suara amplifier's rating; reduce volume or operating time. |
8. Spesifikasi
The following are key specifications for the Lanzar RBHTG414 Heritage Amplebih hidup:
- Jenama: Lanzar
- Nombor Model: RBHTG414
- Bilangan Saluran: 4
- Output Kuasa: 600 Watts (Peak)
- AmpKelas yang lebih hidup: MOSFET
- Jenis Pemasangan: Lekapan Permukaan
- Dimensi Produk (L x W x H): 2 x 2 x 2 inci
- Berat Barang: 10.89 paun
- UPC: 068888725088
- warna: BLACK (Unit shown in image is silver, but product data indicates BLACK)
9. Waranti dan Sokongan
Lanzar products are designed for reliability and performance. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Lanzar website. Please have your model number (RBHTG414) and purchase information ready when contacting support.
