1. Pengenalan
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your BenQ DW1600 internal DVD+RW IDE disk drive. Please read this manual thoroughly before using the product to ensure proper and safe operation.
2. Maklumat Keselamatan
Arahan Keselamatan Penting:
- Always disconnect power from your computer before installing or removing any internal components.
- Handle the drive by its edges to avoid touching the circuit board or optical lens.
- Do not expose the drive to moisture or extreme temperatures.
- This device contains a laser. Do not attempt to open the drive casing or repair it yourself. Refer all servicing to qualified personnel.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- BenQ DW1600 Internal DVD+RW Drive
- IDE Data Cable (typically 80-conductor)
- Skru Pemasangan
- Panduan Pemasangan Ringkas (dokumen ini berfungsi sebagai panduan komprehensif)
- Software CD (may include drivers or burning software, if applicable)
4. Persediaan dan Pemasangan
4.1 Pemasangan Fizikal
- Sediakan komputer anda: Power off your computer and unplug the power cord. Open the computer case.
- Select a drive bay: Locate an available 5.25-inch drive bay. Remove the front panel cover if necessary.
- Set Jumper Settings: On the back of the DW1600 drive, locate the jumper block. Set the jumper for Master, Slave, or Cable Select according to your system's configuration. Consult your motherboard manual for proper IDE device configuration.
- Pasang pemacu: Slide the DW1600 drive into the selected bay from the front of the case until the screw holes align. Secure the drive with the provided mounting screws on both sides.
- Connect IDE cable: Connect one end of the IDE data cable to the IDE connector on the back of the DW1600 drive. Connect the other end to an available IDE controller on your motherboard. Ensure the red stripe on the cable aligns with Pin 1 on both the drive and the motherboard connector.
- Sambungkan kabel kuasa: Connect a 4-pin Molex power connector from your power supply to the power input on the back of the DW1600 drive.
- Close computer case: Replace the computer case cover and reconnect the power cord.
4.2 Pemasangan Pemandu
The BenQ DW1600 is generally plug-and-play with most modern operating systems (Windows XP/Vista/7/8/10, Linux). Drivers are typically detected and installed automatically. If prompted, insert the provided software CD or visit the BenQ support website for specific drivers.
5. Arahan Operasi
5.1 Loading and Ejecting Discs
- Untuk memuatkan: Press the eject button on the front of the drive. The disc tray will open. Place a disc (label side up) onto the tray, ensuring it sits correctly in the center. Gently push the tray back into the drive until it clicks shut, or press the eject button again.
- Untuk Mengeluarkan: Press the eject button on the front of the drive. Alternatively, right-click the drive icon in "My Computer" or "This PC" and select "Eject".
- Eject Kecemasan: In case of power failure or software malfunction, locate the small pinhole on the front of the drive. Insert a straightened paperclip into the pinhole and push gently to manually open the disc tray.
5.2 Reading and Writing Data
The BenQ DW1600 supports reading and writing various CD and DVD formats, including DVD+R, DVD+RW, and DVD+R DL. To read data, simply insert a disc. Your operating system or installed media player software will typically recognize the disc content.
To write data, you will need compatible burning software (e.g., Nero, Roxio, or built-in Windows burning utilities). Follow the instructions provided with your chosen software to create data discs, audio CDs, video DVDs, or backup files.
6. Penyelenggaraan
- Membersihkan Bahagian Luar: Use a soft, dry cloth to wipe the front panel of the drive. Do not use harsh chemicals or abrasive cleaners.
- Penjagaan Cakera: Keep discs clean and free of scratches. Store them in protective cases when not in use.
- Pembersihan Dalaman: Avoid attempting to clean the internal optical lens yourself. This can cause damage and void your warranty.
7. Penyelesaian masalah
If you encounter issues with your BenQ DW1600 drive, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pemacu tidak dikesan oleh komputer. | Incorrect cable connection, incorrect jumper setting, power issue. |
|
| Dulang cakera tidak boleh dibuka/tutup. | Power issue, mechanical obstruction, software conflict. |
|
| Tidak boleh membaca atau menulis cakera. | Dirty/damaged disc, incompatible disc format, software issue, dirty lens. |
|
8. Spesifikasi
- Nombor Model: DW1600
- Jenis: Internal DVD+RW (+R DL) IDE Disk Drive
- Antara muka: IDE (PATA)
- Faktor Bentuk: 5.25 inci
- Media yang Disokong: DVD+R, DVD+RW, DVD+R DL, CD-R, CD-RW, CD-ROM, DVD-ROM
- Berat Barang: 3.91 auns
- Dimensi Pakej: 0.04 x 0.04 x 0.04 inci (Note: These dimensions appear to be placeholder/incorrect from source data, actual drive dimensions would be larger)
- Pengeluar: BenQ
9. Waranti dan Sokongan
Untuk maklumat jaminan dan sokongan teknikal, sila rujuk laman web rasmi BenQ website or contact BenQ customer service. Keep your purchase receipt as proof of purchase for warranty claims.
BenQ Support: https://www.benq.com/en-us/support.html





