1. Pengenalan
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your PORTER-CABLE 690LR Fixed Base Router. Please read and understand all instructions before using the tool.
2. Maklumat Keselamatan
AMARAN: Always wear eye protection and hearing protection when operating power tools. Ensure the workpiece is securely clamped. Disconnect power before making any adjustments or changing accessories.
- Baca semua arahan dengan teliti.
- Pastikan kawasan kerja bersih dan terang.
- Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
- Jauhkan kanak-kanak dan orang ramai semasa mengendalikan alat kuasa.
- Berpakaianlah dengan betul. Jangan pakai pakaian atau barang kemas yang longgar. Jauhkan rambut, pakaian, dan sarung tangan daripada bahagian yang bergerak.
- Gunakan peralatan keselamatan. Sentiasa pakai pelindung mata. Topeng habuk, kasut keselamatan tidak tergelincir, topi keras atau perlindungan pendengaran mesti digunakan untuk keadaan yang sesuai.
3. Produk Lebihview
The PORTER-CABLE 690LR is an 11-amp, 1-3/4 peak horsepower fixed-base router designed for precise woodworking tasks. It features a single-speed motor delivering 27,500 RPM.
Rajah 1: Depan view of the PORTER-CABLE 690LR Fixed Base Router, showcasing its ergonomic handles and robust design.
Rajah 2: Sisi view of the router, highlighting the cam-lock lever for coarse height adjustments and the micro depth adjuster.
Figure 3: Included accessories: 1/4-inch and 1/2-inch collets, and a collet wrench for bit changes.
4. Persediaan
4.1. Installing/Changing Router Bits
- Putuskan Kuasa: Always unplug the router before installing or changing bits.
- Loosen Collet Nut: Use the provided collet wrench to loosen the collet nut.
- Sisip Bit: Insert the desired router bit into the collet. Ensure at least 3/4 of the shank is inserted to prevent slippage and damage.
- Ketatkan Collet Nut: Securely tighten the collet nut with the wrench. Do not overtighten. The auto-release collet system facilitates easy bit removal.
4.2. Melaraskan Kedalaman
- Loosen Cam-Lock Lever: Locate and loosen the cam-lock lever on the fixed base.
- Pelarasan Kasar: Adjust the motor pack up or down within the base for approximate depth.
- Micro Depth Adjustment: For fine-tuning, use the micrometer depth adjuster. This allows for precise adjustments accurate to 1/128-inch.
- Tuas Selamat: Once the desired depth is set, firmly tighten the cam-lock lever to secure the motor in place.
5. Arahan Operasi
The 690LR router is suitable for a variety of woodworking tasks, including edge profiling, dadoes, and pattern routing. Always ensure the router is stable and the workpiece is secure before operation.
5.1. Operasi Am
- Ensure the router bit is sharp and appropriate for the material.
- Always make multiple shallow passes rather than one deep pass, especially with harder materials, to reduce strain on the motor and improve cut quality.
- Maintain a firm grip on both ergonomic handles during operation.
- Feed the router into the material at a consistent, moderate speed.
5.2. Router Table Use
The 690LR can be mounted to a router table. The quick fixed-base motor release allows for easy transfer between handheld and table-mounted applications. Ensure the router is securely fastened to the table according to the router table manufacturer's instructions.
6. Penyelenggaraan
- Pembersihan: Regularly clean the router, especially the collet area and base, to remove sawdust and debris. A dust-sealed switch and sealed ball-bearing construction help protect internal components.
- Penjagaan Bit: Keep router bits sharp and clean. Dull bits can cause burning and excessive motor strain.
- Pemeriksaan Kord: Periksa kord kuasa secara berkala untuk sebarang kerosakan.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Penghala tidak bermula | No power, faulty switch | Check power connection, inspect switch. |
| Burning wood during routing | Dull bit, too slow feed rate, too deep cut | Replace/sharpen bit, increase feed rate, make shallower passes. |
| Rough cut quality | Dull bit, incorrect bit for material, excessive feed rate | Replace/sharpen bit, use appropriate bit, reduce feed rate. |
| Getaran yang berlebihan | Loose bit, damaged bit, motor imbalance | Ensure bit is tight, replace damaged bit, contact service if motor issue. |
8. Spesifikasi
- Jenama: KABEL PORTER
- model: 690LR
- Motor: 11-Amp, 1-3/4 Peak Horsepower
- Kelajuan: 27,500 RPM (Single-speed)
- Jenis asas: tetap
- Collet: 1/4-inch and 1/2-inch
- Bahan: Precision-machined Aluminum Motor Housing and Base
- Berat Barang: 9.4 paun
- Dimensi Produk: 10 x 10 x 8 inci
- Voltage: 120V
9. Waranti dan Sokongan
9.1. Maklumat Waranti
The PORTER-CABLE 690LR Fixed Base Router is backed by a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee. Please refer to the official warranty document included with your product for full details and terms.
9.2. Sokongan Pelanggan
For technical assistance, parts, or service, please contact PORTER-CABLE customer support. Visit the official PORTER-CABLE website for contact information and service center locations.
