G-2 Global

Global Knives 8" Chef's Knife G-2 Standard Instruction Manual

Model: G-2 | Brand: Global

pengenalan

The Global G-2 8-inch Chef's Knife is a versatile kitchen tool designed for mincing, cutting, chopping, and slicing. Manufactured in Japan, this knife features a blade crafted from high-tech molybdenum/vanadium stainless steel, known for its ability to retain a sharp edge. The blade is face-ground with a long taper, contributing to its lasting sharpness. The stainless-steel handle is molded for comfort and dimpled to provide a secure, slip-resistant grip. Its lightweight design and balanced construction, achieved by injecting sand into the hollow handle, enhance maneuverability. A finger notch between the blade and handle is incorporated for user safety.

Global G-2 8-inch Chef's Knife, front view

Imej: Depan view of the Global G-2 8-inch Chef's Knife, showcasing its sleek design and dimpled handle.

Ciri-ciri Utama

  • Lightweight, precisely balanced 8-inch (20cm) chef's knife.
  • Blade constructed from high-tech molybdenum/vanadium stainless steel.
  • Edge designed to retain razor sharpness exceptionally well.
  • Stainless-steel handle molded for comfort and dimpled for a safe grip.
Diagram illustrating Global G-2 Chef's Knife features

Image: Diagram highlighting key features such as hygienic one-piece structure, iconic design, rust resistance, 15° cutting edge, weighted hollow handle, and long-lasting edge retention.

Persediaan

Pembersihan Awal

Before first use, hand wash the knife with warm, soapy water and dry it thoroughly. This removes any manufacturing residues and prepares the knife for use.

Arahan Operasi

Kegunaan Umum

The Global G-2 Chef's Knife is designed for a variety of kitchen tasks. Use it for:

  • Mencincang: Finely chop herbs, garlic, or ginger.
  • Memotong: Prepare vegetables like onions, carrots, and celery.
  • Menghiris: Cut meats, poultry, and larger vegetables with precision.
  • Kerja Persediaan: Handle general food preparation tasks efficiently.

Always use a stable cutting surface, such as a wooden or soft plastic cutting board, to protect the blade's edge.

Cengkaman yang betul

Hold the knife with a firm but relaxed grip. The dimpled handle is designed to prevent slipping. For optimal control, grip the handle with your dominant hand, placing your thumb on one side of the blade and your index finger on the opposite side, just above the handle.

Global G-2 Chef's Knife in use, chopping an onion

Image: The Global G-2 Chef's Knife being used to chop an onion on a wooden cutting board.

Penjagaan dan Penyelenggaraan

Pembersihan

Basuh Tangan Sahaja: Global knives should be hand washed immediately after each use with warm, soapy water. Rinse thoroughly and dry completely with a soft cloth to prevent water spots and protect the edge. Jangan basuh di mesin basuh pinggan mangkuk, as harsh detergents and high temperatures can damage the blade and handle.

Mengasah

To maintain the razor sharpness of your Global knife, use a ceramic sharpener or a diamond steel. These are recommended over traditional metal sharpening steels. For more intensive sharpening, a synthetic whetstone, ceramic whetstone, or a Shinkansen sharpener can be used. Global also offers a Sharpening Guide Rail to assist in honing blades at the proper angle.

Penyimpanan

Always store Global knives in a safe, dry environment. It is recommended to store them in a dedicated knife block or on a magnetic knife rack to protect the blade and prevent accidental injury.

Global G-2 Chef's Knife resting on a wooden cutting board

Image: The Global G-2 Chef's Knife on a cutting board, illustrating proper storage away from other utensils.

Menyelesaikan masalah

Dull Edge

If the knife's edge becomes dull, refer to the "Sharpening" section under Care and Maintenance. Regular honing and occasional sharpening will restore its cutting performance.

Bintik Karat

Although made of stainless steel, prolonged exposure to moisture or harsh chemicals can lead to rust spots. Ensure the knife is thoroughly dried after washing and stored in a dry place. Minor rust spots can often be removed with a non-abrasive cleaner designed for stainless steel.

Spesifikasi

Nombor ModelG-2
Bahan BilahMolybdenum/Vanadium Stainless Steel
Bahan PemegangKeluli Tahan Karat
Tepi BilahBiasa
Panjang Bilah8 Inci (20 cm)
Jenis PembinaanStamped
Berat Barang0.49 paun (7.8 auns)
Mesin basuh pinggan mangkuk selamatTidak (disyorkan mencuci tangan)
PengeluarYoshikin

Waranti dan Sokongan

The Global G-2 Chef's Knife comes with a lifetime warranty against defects and breakage. For warranty claims or product support, please contact Global customer service through their official webtapak atau peruncit yang diberi kuasa.

Dokumen Berkaitan - G-2

Praview GLOBAL UP 1515 VF-AUT Manual Mesin Jahit Kaki Kaki Berjalan Jarum Tunggal Jarum
Manual komprehensif ini menyediakan arahan pengendalian dan maklumat bahagian untuk GLOBAL UP 1515 VF-AUT, jarum tunggal, alas rata, mesin jahit kaki berjalan yang dilengkapi dengan pisau sisi. Direka untuk menjahit bahan tebal seperti kusyen automotif, sofa, dompet dan khemah, mesin perindustrian ini menawarkan penyusuan segerak, jahitan licin dan prestasi bunyi rendah berkelajuan tinggi.
Praview Manual Bahagian GLOBAL WF 9221-76 Siri | Gambar rajah dan Komponen
Manual bahagian terperinci untuk mesin jahit GLOBAL WF 9221-76 Series, menampilkan gambar rajah dan senarai komponen untuk mengenal pasti dan mendapatkan sumber alat ganti untuk peralatan jahitan industri. Lawati www.globalsew.com untuk maklumat lanjut.
Praview Global Tri-Temp Water Dispenser 670435 Instruction Manual
Official instruction manual for the Global Tri-Temp Water Dispenser (Model 670435), detailing setup, operation, maintenance, and troubleshooting procedures. Includes safety precautions and specifications.
Praview Manual Pengendalian Motor Servo Penjimatan Tenaga Global SV 550
Manual pengendalian komprehensif untuk motor tanpa berus mesin jahit perindustrian penjimatan tenaga Global SV 550, merangkumi keselamatan, pengenalan produk, pemasangan, tetapan parameter, keperluan persekitaran dan penyelesaian masalah.
Praview Manual Arahan dan Alat Ganti Mesin Jahit Global ZZ 1366-3S-76-P
Manual ini menyediakan arahan terperinci dan senarai alat ganti untuk mesin jahit zig-zag jahitan kunci Global ZZ 1366-3S-76-P, lengan panjang, tugas berat tambahan, jarum tunggal.
Praview Arahan Pengendalian Penghawa Dingin Breezonic Performance & Performance Plus
Arahan pengendalian, panduan penyelenggaraan dan spesifikasi yang komprehensif untuk penghawa dingin Eberspacher Breezonic Performance dan Performance Plus yang digunakan dalam kenderaan rekreasi (RV) dan karavan.