Manual Pengguna Pemisah HDMI 4K TESmart HSW0401A1U

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your TESmart HSW0401A1U 4K HDMI Splitter. This device allows you to connect up to four HDMI source devices to a single display, supporting high-resolution video and versatile audio output options. Please read this manual thoroughly before use to ensure optimal performance and safety.

Figure 1: TESmart HSW0401A1U 4K HDMI Splitter

Kandungan Pakej

Sila semak kandungan bungkusan selepas diterima untuk memastikan semua item ada dan tidak rosak:

• 1 x TESmart HSW0401A1U HDMI Splitter
• 1 x Alat Kawalan Jauh IR
• 1 x Penyesuai Daya DC 5V 1A
• 1 x Manual Pengguna

Figure 2: What's in the Box - HDMI Splitter, IR Remote, Power Adapter, and User Manual.

Ciri-ciri Produk

• 4-in-1-out HDMI Switching: Share one monitor, display, or projector among four HDMI source devices.
• Sokongan Resolusi Tinggi: Achieves resolutions up to 3840x2160@60Hz with 4:4:4 chroma subsampling.
• HDMI 2.0 & HDCP 2.2 Compliant: Ensures compatibility with modern high-definition content and devices.
• EDID Emulators: Features EDID emulators in each input port to ensure connected PCs always receive correct display information.
• Multi-interface Audio Output: Supports independent audio output via S/PDIF optical and L/R AUX interfaces.
• Mod Audio: Switch between 2.0, 5.1, and Auto audio output modes.
• Kaedah Penukaran Berbilang: Easy input source switching via front panel buttons, IR remote control, or automatic switching.
• HDR 10 Support: Enhances visual quality with High Dynamic Range.
• Dolby TrueHD Support: Provides high-fidelity audio experience.

Figure 3: Support for Ultra High-definition 4K@60Hz.

Figure 4: Multi-interface audio output supporting S/PDIF and L/R AUX.

Arahan Persediaan

Follow these steps to set up your HDMI Splitter:

1. Matikan Peranti: Ensure all HDMI source devices (e.g., gaming consoles, Blu-ray players) and your display are powered off before making any connections.
2. Sambungkan Sumber HDMI: Connect up to four HDMI source devices to the HDMI Input ports (1, 2, 3, 4) on the rear panel of the splitter. Note that the input ports are labeled from right to left (Input 1, Input 2, Input 3, Input 4).
3. Sambungkan Paparan HDMI: Connect your HDMI display (TV, monitor, projector) to the HDMI Output port on the rear panel.
4. Sambungkan Output Audio (Pilihan):
   • For optical digital audio, connect an S/PDIF cable from the splitter's S/PDIF port to your audio receiver or soundbar.
   • For analog stereo audio, connect a 3.5mm audio cable from the splitter's L/R AUX port to your audio system.
5. Sambungkan Kuasa: Plug the DC 5V 1A Power Adapter into the DC 5V port on the splitter and then into a power outlet.
6. Hidupkan Peranti: Power on your display first, then your HDMI source devices.

Figure 5: Front and Rear Panel Layout with Input/Output Ports.

Arahan Operasi

The TESmart HDMI Splitter offers several methods for switching between input sources and adjusting audio settings:

Penukaran Sumber Input:

• Butang Panel Depan: Press the 'Input' button on the front panel to cycle through the connected HDMI sources (1, 2, 3, 4). The corresponding Input Selection Status LED will illuminate.
• Kawalan Jauh IR: Use the included IR remote control to directly select an input source by pressing the numbered buttons (1, 2, 3, 4).
• Penukaran Automatik: The splitter supports automatic switching. When a new active HDMI source is detected, the splitter can automatically switch to that input.

Audio Format Selection:

• Press the 'Audio' button on the front panel or the remote control to cycle through audio output modes: 2.0 (stereo), 5.1 (surround sound), or Auto (automatic detection). The Audio Format Indicator LEDs will show the current selection.

Figure 6: Multiple Switching Methods including front panel buttons and IR remote control.

Petua pengguna

• For best performance, use high-quality HDMI 2.0 cables, especially for 4K@60Hz signals.
• If you experience issues with video or audio, try power cycling all connected devices (splitter, sources, display) in sequence.
• Ensure your display and source devices support the desired resolution and refresh rate (e.g., 4K@60Hz) for optimal picture quality.

Menyelesaikan masalah

If you encounter problems with your HDMI Splitter, please refer to the following common issues and solutions:

• Tiada Output Video/Audio:
  • Check all HDMI cable connections to ensure they are secure.
  • Verify that the correct input source is selected on the splitter.
  • Ensure the display is set to the correct HDMI input.
  • Cuba kabel HDMI yang berbeza.
  • Power cycle all devices (splitter, sources, display).
• Isyarat Berkelip-kelip atau Sekejap-sekejap:
  • Ensure HDMI cables are of high quality and rated for the resolution being used (e.g., HDMI 2.0 for 4K@60Hz).
  • Kurangkan panjang kabel jika boleh.
  • Semak gangguan daripada peranti elektronik lain.
• No 5.1 Audio:
  • Ensure your source device is outputting 5.1 audio.
  • Set the splitter's audio mode to '5.1' or 'Auto'.
  • Verify your audio receiver/soundbar supports 5.1 audio and is correctly configured.
• Alat Kawalan Jauh Tidak Berfungsi:
  • Ensure the remote has fresh batteries (requires 2x AAA batteries).
  • Point the remote directly at the IR receiver on the front of the splitter.
  • Remove any obstacles between the remote and the splitter.

Spesifikasi

Penyelenggaraan

To ensure the longevity and proper functioning of your HDMI Splitter, follow these maintenance guidelines:

• Keep the device in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and moisture.
• Elakkan daripada mendedahkan peranti kepada suhu atau kelembapan yang melampau.
• Bersihkan peranti dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau aerosol.
• Do not attempt to open or modify the device, as this will void the warranty and could cause damage.
• Disconnect the power adapter if the device will not be used for an extended period.

Waranti dan Sokongan

For technical support or warranty inquiries, please contact TESmart customer service using the information below:

• WhatsApp: +86 18473951878
• e-mel: 17680775530@163.com

Figure 7: TESmart Customer Service Contact Information.