1. Pengenalan
This manual provides essential information for the safe and efficient operation of your ANENJI 6.2kW 48V Hybrid Solar Inverter and 51.2V 100AH LiFePO4 Rack Battery system. Please read this manual thoroughly before installation and use, and keep it for future reference.
2. Maklumat Keselamatan
Always observe safety precautions when installing, operating, or maintaining the solar inverter and battery system. Failure to do so may result in serious injury or damage to equipment.
- Ensure all electrical connections are made by qualified personnel.
- Do not attempt to open or repair the inverter or battery unless specifically instructed in this manual.
- Jauhkan sistem daripada bahan mudah terbakar, kelembapan dan cahaya matahari langsung.
- Pastikan pengudaraan yang betul di sekeliling penyongsang untuk mengelakkan terlalu panas.
- Pakai peralatan pelindung diri (PPE) yang sesuai semasa pemasangan dan penyelenggaraan.
3. Produk Lebihview
The ANENJI Hybrid Solar Inverter and LiFePO4 Battery system is designed for efficient home solar energy storage and utilization. It features a pure sine wave output, high power factor, and advanced MPPT solar charging.
3.1 Inverter Features (ANJ-6200W-48V-WIFI)
- Keluaran gelombang sinus tulen
- Faktor kuasa 1.0
- PV input Voltage range: 60Vdc-500Vdc
- Built-in MPPT 120A solar charge controller
- Capable of working without a battery
- Detachable dust cover for harsh environments
- WiFi remote monitoring (optional)
- Support for multiple output priorities: UTL (Utility), SOL (Solar), SBU (Solar-Battery-Utility), SUB (Solar-Utility-Battery)
- EQ function to optimize battery performance and extend lifecycle
- Compatible with LiFePO4 batteries via RS485 communication
- Lithium battery activation function, triggerable by mains or PV
3.2 Battery Features (51.2V 100AH LiFePO4 Rack Battery)
- Bateri LiFePO51.2 100V 4AH
- BMS Built-in: 16S1P 100AH
- Tenaga: 5120Wh
- Long cycle life: >6000 cycles
- Ultra-safe LiFePO4 cells composition
- Integrated BMS for overall protection
3.3 Pengenalan Komponen
3.3.1 LiFePO4 Battery Function Description
| Tidak. | Komponen |
|---|---|
| 1 | Terminal Negatif |
| 2 | Terminal Positif |
| 3 | Display Screen (Battery Info, Temper Info, Status Info) |
| 4 | Battery Running Indicator |
| 5 | Cahaya Kesalahan |
| 6 | SOC Display Light |
| 7 | INV Communication Port |
| 8 | Port Komunikasi CAN Luaran |
| 9 | HC Communication Port |
| 10 | Pelabuhan Komunikasi RS485 |
| 11 | Suis Kuasa |
| 12 | Suis Udara |
3.3.2 Hybrid Solar Inverter Product Overview
| Tidak. | Komponen |
|---|---|
| 1 | Paparan LCD |
| 2 | Penunjuk Status |
| 3 | Penunjuk Pengecasan |
| 4 | Petunjuk Kesalahan |
| 5 | Function Buttons (ESC, UP, DOWN, ENTER) |
| 6 | Suis Hidupkan/Mati Kuasa |
| 7 | Input AC |
| 8 | Output AC |
| 9 | Input PV |
| 10 | Input Bateri |
| 11 | Wire Outlet Hole |
| 12 | Terminal Pembumian |
4. Persediaan dan Pemasangan
Proper installation is crucial for the performance and safety of your solar system. Follow these guidelines carefully.
4.1 Sambungan PV
Connect your solar panels to the inverter's PV input. Ensure the PV module parameters are within the inverter's specifications.
When choosing the right PV module, note the following parameters:
- The open circuit (Voc) voltage of the photovoltaic module must not exceed the voltage of the open circuit of the maximum inverter photoelectric matrix.
- The open circuit (Voc) voltage of the photovoltaic module should be higher, and the minimum voltage of the battery should be higher.
| MODEL INVERTER | ANJ-6200W-WIFI |
|---|---|
| Kuasa Array PV Maksimum | 6500W |
| Maks. PV Tatasusunan Litar Terbuka Voltage | 500VDC |
| Arus Caj Suria Maksimum | 120A |
4.2 Battery Connection and Parallel Use
The LiFePO4 batteries can be stacked and connected in parallel to increase capacity. Up to 15 batteries can be connected in parallel.
Similarly, the inverters can also be connected in parallel for increased power output, supporting up to 15 units.
4.3 System Wiring Diagrams
4.3.1 Operation With Battery Connected
4.3.2 Operation Without Battery Connected
4.3.3 Hybrid Power System Overview
4.4 Aksesori Produk
Ensure all necessary accessories are present for installation.
5. Operasi
Understand the various operating modes and monitoring capabilities of your ANENJI solar system.
5.1 Mod Pengecasan dan Output
The inverter supports four charging modes and two load output working modes to suit different energy management needs.
Four Charging Modes:
- Solar First: Mengutamakan kuasa solar untuk mengecas bateri.
- Utiliti Pertama: Mengutamakan kuasa grid untuk mengecas bateri.
- Solar dan Utiliti: Menggunakan kuasa solar dan utiliti untuk pengecasan.
- Hanya Suria: Mengecas bateri secara eksklusif daripada kuasa solar.
Two Load Output Working Modes:
- Solar First: Prioritizes solar power to supply the load.
- Utiliti Pertama: Prioritizes grid power to supply the load.
5.2 Pemantauan Jauh
The system supports WiFi remote monitoring, allowing you to check the status of your device using a smart application.
6. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your solar system.
- Keep the inverter and battery clean and free from dust. The inverter has a detachable dust cover for easier cleaning in harsh environments.
- Periodically check all cable connections for tightness and signs of wear or corrosion.
- Ensure adequate ventilation around the inverter and battery.
- Monitor the system's performance via the display screen or the mobile app for any anomalies.
- Refer to the specific maintenance instructions for the LiFePO4 battery for optimal care.
7. Penyelesaian masalah
Bahagian ini menyediakan panduan umum untuk isu-isu biasa. Untuk masalah yang rumit, hubungi sokongan teknikal.
7.1 Isu dan Penyelesaian Biasa
- Tiada Output Kuasa: Check all connections, ensure the power switch is ON, and verify battery charge level or PV input.
- Inverter Fault Light On: Refer to the inverter's display screen for specific error codes and consult the full product manual for detailed troubleshooting steps.
- Bateri Tidak Dicas: Verify PV input, check solar panel connections, and ensure charging mode settings are correct.
- Sistem Terlalu Panas: Ensure proper ventilation, clear any obstructions around the inverter's cooling fins.
7.2 Multi-Protection Functions
The inverter is equipped with multiple protection functions for safe and reliable operation.
- Perlindungan litar pintas
- Perlindungan Lonjakan
- Perlindungan Lebihan
- Perlindungan Suhu Terlebih
- Vol. Rendahtage Perlindungan
- Vol Tinggitage Perlindungan
8. Spesifikasi
8.1 Hybrid Solar Inverter (ANJ-6200W-48V-WIFI)
| kategori | item | Spesifikasi |
|---|---|---|
| Model | Nama Model | ANJ-6200W-48V-WIFI |
| Kapasiti | 6.2KVA/6.2KW | |
| Input | Nominal Voltage | 230VAC |
| Kekerapan | 50/60Hz (Auto penderiaan) | |
| Nominal Voltage | 220/230VAC±5% | |
| Keluaran | Kuasa Lonjakan | 11000VA |
| Kekerapan | 50/60Hz | |
| bentuk gelombang | Gelombang sinus tulen | |
| Masa Pemindahan | 10ms (For personal Computer)/20ms (For Home Appliances) | |
| Peak Efficiency (PV to INV) | 96% | |
| Bateri | Bateri Voltage | 48VDC |
| Caj Terapung Voltage | 54VDC | |
| Perlindungan Lebih Caj | 63VDC | |
| Kaedah Pengecasan | CC/CV | |
| Pengecas Solar & Pengecas AC | Jenis Pengecas Suria | MPPT |
| Maks. Kuasa Array PV | 6500W | |
| Maks. PV Tatasusunan Litar Terbuka Voltage | 500VDC | |
| PV Array MPPT Voltage Julat | 60-500VDC | |
| Maks. Arus Input Suria | 27A | |
| Maks. Arus Caj Suria | 120A | |
| Fizikal | Dimensions, DxWxH (mm) | 482x290x113 |
| Package Dimensions DxWxH (mm) | 566x380x190 | |
| Berat Bersih (kg) | 10 | |
| Antaramuka Komunikasi | USB/RS232/Dry-contact | |
| Persekitaran | Julat Suhu Operasi | -10°C hingga 50°C |
| Suhu Penyimpanan | -15°C - 60°C | |
| Kelembapan | 5% hingga 95% Kelembapan Relatif (Tidak pemeluwapan) |
8.2 LiFePO4 Rack Battery (51.2V 100AH)
| Tidak. | barang | Kriteria | Teguran |
|---|---|---|---|
| 2.1 | Kapasiti Biasa | 5120Wj | Pelepasan caj 0.5 C untuk voltage |
| 2.2 | Kaedah Gabungan | 16S1P | |
| 2.3 | Nominal Voltage | 51.2V | |
| 2.4 | Impedans Dalaman | Battery: ≤0.7mΩ | AC 1 KHz selepas cas standard |
| 2.5 | Caj Voltage (V) | 58.4V | |
| 2.6 | Caj Piawai Semasa | 50A | |
| 2.7 | Maks. Caj Arus | 100A | |
| 2.8 | Arus nyahcas berterusan | 100A | |
| 2.9 | Arus nadi | 200A | |
| 2.10 | Penghantaran Voltage Keperluan | ≥51.2V | |
| 2.11 | Suhu Operasi | 0°C ~ +55°C | Mengecas |
| -20°C ~ +55°C | Menyahcas | ||
| 2.12 | Suhu Penyimpanan | -20°C ~ +45°C | Kurang dari 1 bulan |
| -20°C ~ +35°C | Kurang dari 6 bulan | ||
| 3.1 | A-Grade Cell | 50160116-100Ah | LiFePO4 |
| 3.2 | BMS | 16S100A | |
| 3.3 | Penyambung |
9. Petua Pengguna
- For optimal battery life, try to keep the battery charge within the recommended range and avoid frequent deep discharges.
- Utilize the WiFi monitoring feature to keep track of your system's performance and identify potential issues early.
- Consider the 'Solar First' charging mode to maximize the use of renewable energy and reduce electricity bills.
- When expanding your system, ensure all new components are compatible and follow the parallel connection guidelines carefully.
10. Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please refer to the official ANENJI webtapak atau hubungi pengedar sah anda. Simpan resit pembelian anda sebagai bukti pembelian.