High Pressure Alloy Nozzle Pesticide Sprayer

1. Pengenalan

This manual provides essential information for the safe and effective use of your High Pressure Alloy Nozzle Pesticide Sprayer. Designed for agricultural, gardening, aquaculture, and industrial applications, this fan-shaped tube binder sprayer is ideal for modifying large tractors or plant workshop setups to enhance spraying efficiency and coverage. Its robust zinc alloy construction ensures durability and reliable performance.

2. Maklumat Keselamatan

Please read and understand all safety instructions before operating the sprayer. Failure to do so may result in injury or damage to the equipment.

• Always wear appropriate personal protective equipment (PPE) such as gloves, eye protection, and respiratory masks when handling pesticides or other chemicals.
• Ensure the sprayer is securely mounted and all connections are tight before use to prevent leaks.
• Do not spray near open flames, electrical equipment, or in windy conditions that could cause drift.
• Jauhkan daripada kanak-kanak dan haiwan peliharaan.
• After use, thoroughly clean the sprayer and dispose of any chemical residues according to local regulations.
• Never use the sprayer for purposes other than its intended use.

3. Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

• 1 x Machine Body (Sprayer Nozzle Assembly)
• 1 x Bayonet (Mounting Clamp)
• 2 x Skru
• 2 x Nuts

4. Spesifikasi

5. Persediaan dan Pemasangan

Follow these steps to assemble and install your sprayer:

1. Assemble the Mounting Clamp: Attach the bayonet (mounting clamp) to the main sprayer body using the provided screws and nuts. Ensure it is securely fastened but allow for adjustment if needed.
2. Sambungkan ke Sumber Air: The sprayer features an external thread connection. Connect this to your pesticide vehicle's plumbing, irrigation system, or other compatible water/liquid source. Ensure a tight, leak-free connection.
3. Pemasangan selamat: Use the assembled bayonet clamp to securely attach the sprayer to the desired pipe or frame on your equipment (e.g., tractor, spray boom). Tighten the screws firmly to prevent movement during operation.

6. Arahan Operasi

Once installed, operate the sprayer as follows:

1. Sediakan Cecair: Ensure your pesticide vehicle or irrigation system is filled with the appropriate liquid (pesticide, water, etc.) according to its instructions.
2. Aktifkan Aliran: Turn on the liquid flow from your source.
3. Semburan Kawalan: The sprayer features an independent valve (red handle) for controlling the liquid flow through the nozzle. Adjust the handle to open or close the flow as required.
4. Monitor Spray Pattern: The fan-shaped nozzle is designed for broad coverage. Observe the spray pattern and adjust vehicle speed or system pressure to achieve the desired application.

7. Penyelenggaraan

Proper maintenance will extend the life of your sprayer:

• Pembersihan: After each use, flush the sprayer thoroughly with clean water to remove any chemical residues. This prevents clogging and corrosion.
• Pemeriksaan: Regularly inspect the nozzle, valve, and connections for any signs of wear, damage, or leaks. Replace worn parts immediately.
• Storan: Store the sprayer in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure all liquid is drained before storage.

8. Penyelesaian masalah

Berikut ialah beberapa isu biasa dan potensi penyelesaiannya:

9. Waranti dan Sokongan

For any issues not covered in this manual, please contact your retailer or the manufacturer for assistance. Keep your purchase receipt as proof of purchase for any warranty claims.