Manual+

GLEDOPTO GL-C-601P

GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller User Manual

Model: GL-C-601P

1. Pengenalan

The GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller is a versatile smart lighting solution designed for controlling various LED strip types. It supports RGBCCT, RGBW, RGB, CCT, and Dimmer modes, offering comprehensive control over your lighting environment. Operating on the ZigBee 3.0 protocol, it ensures stable connectivity with a wide range of smart home platforms.

Ciri-ciri utama termasuk:

  • Whole-Home Integration: Compatible with ZigBee-certified hubs such as Philips Hue, Amazon Echo Plus, Homey, Conbee II, and SmartThings for seamless smart home integration.
  • Lebar Voltage Sokongan: Works with 5–24V PWM dimmable LED strips.
  • Keselamatan yang Dipertingkatkan: Features a user-replaceable 20A pluggable fuse for robust protection against overcurrent and short circuits.
  • Pilihan Kawalan Fleksibel: Control via your ZigBee network using a smartphone app or voice assistant (e.g., Amazon Alexa). Can also be paired with an optional GLEDOPTO 2.4G RF remote for standalone functionality.
  • Pemasangan Mudah: Equipped with redesigned WAGO push-in connectors for quick, screwless wiring. Offers three power input types: V+/V- terminal, DC5.5×2.1mm jack, and Type-C port.
  • Pencahayaan Tersuai: Innovative Mix mode allows blending color and white light, with 16 million hues and a 2700K–6500K temperature range adjustable via app, voice, remote, or the tactile push switch.

2. Maklumat Keselamatan

Sila baca dan fahami semua arahan keselamatan sebelum pemasangan dan penggunaan. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau bahaya lain.

  • This device is designed for use with DC 5-24V PWM dimmable LED strip lights only. Do NOT use with Addressable RGBIC LED strips.
  • Pastikan bekalan kuasa voltage matches the requirements of your LED strip and controller (DC 5-24V).
  • Always disconnect power before installing or servicing the controller.
  • The controller includes a user-replaceable 20A fuse for protection. If the fuse blows, replace it with a fuse of the same rating.
  • This device requires a standard ZigBee gateway (e.g., Philips Hue, Amazon Echo Plus, Homey, Conbee II, SmartThings) for smart home integration.
  • If no ZigBee gateway is available, a GLEDOPTO 2.4G RF remote control or wall switch is required for operation. This device is only compatible with the GLEDOPTO 2.4G RF remote control.
  • Keep the device away from water, moisture, and extreme temperatures (-20°C to 45°C).
  • Do not attempt to disassemble or modify the controller beyond replacing the fuse.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

  • 1x ZigBee 3.0 Five in One LED Controller Pro Max (GL-C-601P)
  • 1x Manual Pengguna
  • Pelekat 1x 3cm
  • 1x 20A Pluggable Fuse (pre-installed or spare)
Diagram showing the contents of the GLEDOPTO GL-C-601P package: packaging box, 3cm sticker, user instruction, 5A pluggable fuse, and the Zigbee Pro Max 5 in 1 Smart LED Controller.
Rajah 3.1: Kandungan Pakej

4. Spesifikasi

Parameter Nilai
Model No. GL-C-601P
Input Voltage DC 5-24V
Jumlah Arus Keluaran 15A Maks
Output Arus/Saluran 10A Maks
Jenis-C Voltage 5V
Arus Jenis-C 3A Maks
Maks. Kuasa Beban 360W
Kadar IP IP20
bahan PC Kalis Api
Berat Bersih (NW) 70.8g
Berat Kasar (GW) 81.6g
Dimensi (L*W*H) 129 x 50 x 23mm
Suhu Operasi -20°C hingga 45°C
Jarak Jauh 30m
Mod Sambungan ZigBee 3.0
Lampu yang berkenaan RGBCCT, RGBW, RGB, WWCW Dimmer LED Strip Light
Kaedah Terkawal APP, Voice, 2.4G RF Remote
Pensijilan CCC, CE, EMC, FCC, LVD, ROHS
Waranti 2 Tahun
Diagram showing the product structure and size of the GLEDOPTO GL-C-601P controller, with dimensions 129mm length, 50mm width, and 23mm height. Labels indicate the 20A fuse, output wiring terminal, indicator, Opt button, Reset button, DC/Type-C port, and V+/V- input.
Figure 4.1: Product Structure and Size
Table of product parameters for the GLEDOPTO GL-C-601P controller, listing Model No., Input Voltage, Total Output Current, Output Current/Channel, Type-C Voltage, Type-C Current, IP Rate, Material, N.W., G.W., Size, and Operating Temperature.
Rajah 4.2: Parameter Produk Terperinci
Comparison table of wireless protocols: Zigbee 3.0, Wifi, and Bluetooth, showing differences in power consumption, stability, anti-interference ability, security & privacy, and number of product connections.
Figure 4.3: Wireless Protocol Comparison

5. Persediaan

5.1 Power Input Methods

The controller offers three convenient ways to connect power:

  1. V+/V- Power Interface: Standard screw terminals for direct wire connection.
  2. Soket DC 5.5x2.1mm: For use with a standard DC power adapter.
  3. Antaramuka Jenis-C: For 5V power input, typically from a USB wall adapter (not PC USB).
Diagram illustrating the three input methods for the GLEDOPTO GL-C-601P controller: V+/V- power interface, 5.5x2.1mm DC Socket, and Type-C interface.
Figure 5.1: Three Power Input Methods

5.2 Gambarajah Pendawaian

Connect your LED strip to the output terminals according to the type of strip you are using. The controller supports RGBCCT, RGBW, RGB, CCT, and Dimmer configurations. Ensure correct polarity (V+ and V-) and channel connections (R, G, B, W, C, V-).

Detailed wiring diagram for the GLEDOPTO GL-C-601P controller, showing connections for RGB CCT, RGBW, RGB, CCT, and Dimmer LED strips. Each configuration illustrates the required DC power supply and the specific output terminals to use for each color channel.
Figure 5.2: Wiring Diagram for Various LED Strip Types

5.3 ZigBee Gateway Pairing

To integrate the controller into your smart home system, you will need a compatible ZigBee gateway (e.g., Philips Hue Bridge, Amazon Echo Plus, Homey, Conbee II, SmartThings). Follow the instructions provided by your specific ZigBee gateway to add a new device. The controller will typically enter pairing mode automatically when powered on for the first time or after a reset.

Resetting the Controller for Pairing: If the controller does not pair, or if you wish to pair it with a new gateway, long press the 'Reset' button on the device for 5 seconds until the indicator light changes, signaling it is ready for pairing.

6. Arahan Operasi

The GL-C-601P controller offers multiple ways to control your LED strips:

6.1 Key Functions on the Device

Diagram showing the key functions of the GLEDOPTO GL-C-601P controller: Reset button, Opt button, Push button, and Indicator light. Descriptions for short press and long press actions are provided for each button.
Figure 6.1: Controller Key Functions
  • Butang Tetapkan Semula:
    • Short press: Switches the frequency (see Section 6.4).
    • Long press (5 seconds): Resets the controller to factory settings, useful for pairing.
  • Butang Pilih:
    • Short press: Switches the current device function/mode (e.g., RGBCCT, RGBW, RGB, CCT, Dimmer).
    • Long press (5 seconds): Accesses power-on status settings (see Section 6.3).
  • Tekan butang:
    • Short press: Powers the LED strip On/Off.
    • Long press: Adjusts brightness. (Long press increases brightness; release and long press again decreases brightness).
  • Lampu Penunjuk: Displays different colors corresponding to the current operating mode.

6.2 Pensuisan Lima Mod

The controller supports five distinct modes for different LED strip types. Short press the 'Opt' button to cycle through these modes:

  • RGBCCT
  • RGBW
  • RGB
  • CCT (Suhu Warna)
  • Lebih malap
Diagram illustrating the five mode switching capability of the GLEDOPTO GL-C-601P controller. Icons represent RGB CCT, RGBW, RGB, CCT, and Dimmer modes. A short press of the 'Opt' button switches the current device mode.
Rajah 6.2: Pensuisan Lima Mod

6.3 Fungsi Memori Matikan

The controller offers two optional power-on behaviors after a power failure:

  1. Remember State: The lights will return to their last on/off state and brightness/color settings.
  2. Menyala Secara Lalai: The lights will turn on to a default setting (e.g., full brightness white) regardless of their state before power loss.

To switch between these modes, long press the 'Opt' button for more than 5 seconds. The indicator light will flash blue 3 times to confirm the change.

Illustration of the power-off memory function, showing two modes: 'Remember the state of the on/off before power failure' and 'Lights up by default when powered on'. Instructions indicate long pressing the 'Opt' key for more than 5 seconds and observing the indicator light flashing blue 3 times.
Figure 6.3: Power-off Memory Function

6.4 Tetapan Kekerapan

The controller allows for one-touch frequency switching to adapt to different power supplies and reduce noise. Short press the 'Reset' button to cycle through the frequencies:

Kekerapan Berkelip
600Hz 1 kali
800Hz 2 kali
1000Hz 3 kali
2000Hz 4 kali
4000Hz 5 kali
8000Hz 6 kali
Diagram showing frequency settings for the GLEDOPTO GL-C-601P controller. It lists frequencies from 600Hz to 8000Hz and the corresponding number of indicator light flashes. Instructions mention one-touch frequency switching using the Reset button.
Rajah 6.4: Tetapan Frekuensi

6.5 Kawalan Apl

Once paired with a ZigBee gateway, you can control the LED strip via your smart home app. This typically allows for:

  • Adjusting 16 million colors.
  • Setting brightness levels (1% to 100%).
  • Adjusting color temperature (2700K–6500K).
  • Creating and activating custom scenes.
Screenshot of a mobile app interface for controlling LED lighting, showing color wheel, brightness slider, and color temperature adjustment. This demonstrates how to set the right ambiance with 16 million colors, adjustable brightness, and color temperature.
Rajah 6.5: Antara Muka Kawalan Aplikasi

6.6 Kawalan Suara

With a compatible ZigBee gateway and voice assistant (e.g., Amazon Alexa), you can control your lights using voice commands. Examples termasuk:

  • "Alexa, bukak lampu ruang tamu."
  • "Alexa, set to purple."
  • "Alexa, naikkan kepada 70%."
Image demonstrating voice control with Amazon Alexa and Google Home devices, showing example commands like 'Turn on the living room light', 'set to purple', and 'increase to 70%'. Also shows a 2.4G RF remote control for scene memory functions.
Rajah 6.6: Integrasi Kawalan Suara

6.7 Alat Kawalan Jauh RF 2.4G (Pilihan)

If you are using a GLEDOPTO 2.4G RF remote control (sold separately), you can control the LED strip directly without a ZigBee gateway. The remote typically offers:

  • Kawalan Hidup/Mati.
  • Brightness and color adjustments.
  • Scene memory functions (S1, S2, S3, S4 buttons). Long press a scene button to save the current settings; short press to activate a saved scene.

6.8 Mix Mode (RGB + White Light)

The Mix mode allows you to blend RGB colors with white light for unique lighting effects. This is particularly useful for RGBCCT and RGBW strips.

  • When the color loop in your app moves to the edge, only the RGB light turns on.
  • When the color loop moves to the middle, both the RGB light and White light turn on together, allowing for richer, more nuanced colors.
Illustration of RGB+White Light Mix mode. The top image shows the app color wheel with the selector at the edge, resulting in only RGB light. The bottom image shows the selector in the middle, resulting in both RGB and White light turning on together.
Figure 6.7: RGB+White Light Mix Mode

7. Penyelenggaraan

  • Pembersihan: Gently wipe the controller with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • Persekitaran: Ensure the controller is installed in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • Penggantian fius: If the LED strip stops working, check the 20A pluggable fuse. If it is blown, replace it with a new fuse of the same rating (20A). Always disconnect power before replacing the fuse.

8. Penyelesaian masalah

Masalah Kemungkinan Punca Penyelesaian
LED strip not turning on.
  • Tiada kuasa untuk mengawal.
  • Pendawaian yang tidak betul.
  • Fius ditiup.
  • LED strip faulty.
  • Periksa bekalan kuasa dan sambungan.
  • Sahkan pendawaian mengikut Seksyen 5.2.
  • Check and replace the 20A fuse if necessary.
  • Test the LED strip with another power source if possible.
Controller not responding to app/voice commands.
  • Not paired with ZigBee gateway.
  • Weak ZigBee signal.
  • Gateway/app issue.
  • Ensure controller is paired with your ZigBee gateway (Section 5.3).
  • Move controller closer to the gateway or use a ZigBee repeater.
  • Restart your ZigBee gateway and smart home app.
Alat kawalan jauh tidak berfungsi.
  • Alat kawalan jauh tidak dipasangkan.
  • Bateri alat kawalan jauh lemah/mati.
  • Incorrect remote type.
  • Ensure the GLEDOPTO 2.4G RF remote is correctly paired.
  • Gantikan bateri jauh.
  • Confirm you are using a GLEDOPTO 2.4G RF remote control.
Colors/brightness not adjusting correctly.
  • Mod salah dipilih.
  • Isu pendawaian.
  • LED strip type mismatch.
  • Short press the 'Opt' button to cycle through modes and select the correct one for your LED strip.
  • Check output wiring for correct channel connections.
  • Ensure your LED strip is compatible with the selected mode (e.g., RGBW strip in RGBW mode).

9. Petua Pengguna

  • Pemeriksaan Keserasian: Always verify that your existing ZigBee gateway and LED strip type are compatible with the GL-C-601P controller before installation.
  • Kekuatan Isyarat: For optimal performance, ensure the controller is within a reasonable range of your ZigBee gateway or a ZigBee repeater to maintain a strong signal.
  • Bekalan Kuasa: Use a stable and appropriately rated DC power supply (5-24V) that matches the total wattage requirements of your LED strip.

10. Waranti dan Sokongan

The GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller comes with a Waranti 2 tahun dari tarikh pembelian, meliputi kecacatan pembuatan di bawah penggunaan biasa.

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Provide your model number (GL-C-601P) and a detailed description of the issue for faster assistance.

Dokumen Berkaitan - GL-C-601P

Praview Manual Pengguna GLEDOPTO Zigbee 3in1/5in1 LED Smart Controller Pro+
Arahan pengguna yang komprehensif untuk GLEDOPTO Zigbee 3 dalam 1 dan 5 dalam 1 LED Smart Controller Pro+ (GL-C-201P, GL-C-202P). Meliputi spesifikasi, persediaan, sambungan get laluan, gandingan Zigbee dan RF, pendawaian dan penyelesaian masalah.
Praview Arahan Pengguna GLEDOPTO Zigbee 5in1 LED Smart Controller Pro Max
Manual arahan pengguna terperinci untuk GLEDOPTO Zigbee 5in1 LED Smart Controller Pro Max (Model GL-CI-601P). Meliputi spesifikasi, fungsi butang, lampu penunjuk, kaedah penetapan semula, gandingan get laluan dan alat kawalan jauh RF, gambar rajah pendawaian, status hidup kuasa dan tetapan frekuensi.
Praview GLEDOPTO ZigBee Controller Pro User Instruction & RGB+CCT Remote Control Guide
Comprehensive user manual for the GLEDOPTO ZigBee Controller Pro and RGB+CCT Remote Control (GL-RC-006Z). Covers features, wiring, gateway connection, reset procedures, remote control operation, mode descriptions, and compatibility with major smart home systems like Philips Hue, Amazon Echo Plus, and SmartThings.
Praview GLEDOPTO GL-C-601P ZigBee 5in1 LED Smart Controller Pro Max User Manual
User manual for the GLEDOPTO GL-C-601P ZigBee 5in1 LED Smart Controller Pro Max. Provides specifications, setup instructions, wiring diagrams, pairing guides, and troubleshooting for RGBCCT, RGBW, RGB, CCT, and Dimmer LED strips.
Praview Manual Pengguna dan Panduan Keserasian Gledopto Zigbee Controller Pro
Arahan pengguna untuk Gledopto Zigbee Controller Pro, termasuk gambar rajah pendawaian, keserasian get laluan dan gandingan alat kawalan jauh. Ketahui cara menyambung dan mengendalikan peranti Gledopto Zigbee anda dengan pelbagai sistem rumah pintar.
Praview GLEDOPTO LED Dimmer Controller Pro Arahan Pengguna
Arahan pengguna untuk GLEDOPTO LED Dimmer Controller Pro (GL-C-009P), memperincikan sambungan wayar, gandingan get laluan, prosedur tetapan semula dan keserasian alat kawalan jauh.