Anern Hybrid Solar Inverter User Manual

1. Pengenalan

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Anern 5KW or 6.5KW Hybrid Solar Inverter. This high-frequency inverter features a pure sine wave AC output, MPPT solar charging, and dual AC output capabilities. It is designed to integrate solar power with utility grids and can operate with or without a battery, supporting both lithium and lead-acid battery types.

Figure 1: Anern FGI-S5000 Hybrid Solar Inverter

2. Ciri-ciri Utama

• Rated power 5.0KW/5.0KVA (AN-FGI-S5000) or 6.5KW/6.5KVA (AN-FGI-S6500), with a power factor of 1.
• MPPT (Maximum Power Point Tracking) range: 60V~450V, 500Voc.
• High-frequency inverter design for small size and light weight.
• Pure sine wave AC output for sensitive electronics.
• Capable of powering loads simultaneously from solar and utility grid.
• Equipped with CAN/RS485 for Battery Management System (BMS) communication.
• Ability to operate without a battery (batteryless mode).
• Optional WiFi remote monitoring.
• Dual AC output for flexible load management.
• Feed-in to grid functionality.

3. Produk Lebihview

The inverter features a user-friendly interface and clearly labeled connection ports.

3.1 Panel Hadapan dan Paparan

Rajah 2: Panel Hadapan Atasview

1. Penunjuk AC
2. Invert Indicator
3. Penunjuk Pengecasan
4. Petunjuk Kesalahan
5. Paparan LCD
6. Butang ESC
7. Butang Naik
8. Butang Bawah
9. Masukkan Butang
10. Cahaya RGB

Mod Cahaya RGB:

• Standby mode: White
• Battery mode: Red
• City electricity mode: Blue
• PV mode: Orange

3.2 Panel Belakang dan Sambungan

Rajah 3: Sambungan Panel Belakang

• AC Dalam: Utility grid input.
• Keluaran Utama: Primary AC output for rated power loads.
• Output Kedua: Secondary AC output for loads up to one-third of the rated power.
• WiFi: Port for optional WiFi remote monitoring module.
• BMS: Communication port for Battery Management System (RJ45).
• BAT+/-: Battery connection terminals.
• PV In: Solar panel input terminals.
• HIDUP/MATI: Suis kuasa.

4. Spesifikasi

Jadual 1: Spesifikasi Teknikal

5. Persediaan dan Pemasangan

5.1 Rajah Sistem

The following diagram illustrates a typical hybrid solar energy storage system setup:

Figure 4: Hybrid Solar Energy Storage System Diagram

This diagram shows the connection of solar panels, grid, generator, inverter, battery (lithium/lead-acid), and home loads, with cloud and app monitoring capabilities.

5.2 Batteryless Mode

The inverter supports a batteryless mode, allowing it to power loads directly from PV/AC sources without a connected battery. This offers a simpler, plug-and-play wiring solution compared to traditional battery-dependent systems.

Figure 5: Batteryless Mode Operation

5.3 Battery Connection and Type Selection

The inverter is compatible with both lithium and lead-acid batteries. When connecting a lithium battery, ensure compatibility with the inverter's communication protocol via the RJ45 BMS port.

Figure 6: Selectable Battery Types

The inverter supports the following battery types, configurable via the display:

• AGM (lalai)
• FLD (Flooded)
• LIB (Lithium Ternary Battery)
• FEL (Lithium Iron)
• CUS (User-Defined)

For lithium battery connections, verify the compatibility of the battery's protocol with the inverter. There are two connectors on the lithium battery: an RJ45 port for BMS communication and a power cable.

5.4 Dual AC Output

The inverter provides two AC outputs:

• Keluaran Utama: Designed for connecting to a rated power load.
• Output Kedua: Can be connected to a load of up to one-third of the rated power.

6. Operasi

6.1 Solar Charging Priority Modes

The inverter offers flexible solar charging priority settings to optimize energy usage:

Figure 7: Solar Charging Priority Options

• Solar First: Solar energy is prioritized to charge the battery. The utility grid will only charge the battery if solar energy is unavailable.
• Solar dan Utiliti: Both solar energy and the utility grid will charge the battery simultaneously.
• Only Solar Charging: Solar energy is the exclusive charging source, regardless of utility availability.

These modes can be configured via the inverter's LCD display or optional WiFi monitoring application.

7. Penyelenggaraan

To ensure optimal performance and longevity of your Anern Hybrid Solar Inverter, regular maintenance is recommended:

• Pembersihan: Keep the inverter's exterior clean and free from dust and debris. Ensure ventilation openings are unobstructed.
• Sambungan: Periodically check all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion.
• Persekitaran: Ensure the inverter is operating within its specified temperature and humidity ranges. Avoid exposure to direct sunlight or excessive moisture.
• Kemas kini Firmware: If available, consider updating the inverter's firmware via the optional WiFi module to benefit from performance improvements and new features.

8. Penyelesaian masalah

This section provides guidance on common issues you might encounter:

• Tiada Kuasa/Paparan Mati: Check AC input, battery connections, and the ON/OFF switch. Ensure sufficient PV input if operating in solar-only mode.
• Penunjuk Kerosakan Hidup: Refer to the inverter's display for specific error codes. Common faults include over-voltage, bawah-voltage, overload, or short circuit. Address the underlying cause before restarting.
• Kuasa Output Rendah: Sahkan volum input PVtage and current are within specifications. Check battery charge level and health. Ensure loads do not exceed the inverter's rated capacity.
• Bateri Tidak Dicas: Check PV panel connections and ensure sufficient sunlight. Verify AC input if utility charging is enabled. Confirm battery type settings are correct.
• BMS Communication Issues: Ensure the RJ45 cable is securely connected and the lithium battery's protocol is compatible with the inverter.

For persistent issues, consult a qualified technician or contact customer support.

9. Petua Pengguna

• Keserasian Bateri: The inverter is suitable for LiFePo4 batteries, as it supports both Lithium and Lead-acid types. Always ensure the specific battery's BMS protocol is compatible.
• Arus Input PV: The inverter is designed to handle a maximum PV input current of 27 Amperes, as indicated in the specifications (Max PV Input Current/Power: 27A/9000W).
• Pemantauan: Utilize the optional WiFi module for remote monitoring to keep track of your system's performance and settings from anywhere.

10. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Anern customer service. Keep your purchase receipt as proof of purchase.

Rajah 8: Pensijilan Produk