CONENTOOL TIG-200 220V TIG MMA 2-in-1 Welding Machine User Manual

1. Pengenalan

This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your CONENTOOL TIG-200 220V TIG MMA 2-in-1 Welding Machine. The TIG-200 is a versatile welding machine capable of both TIG (Tungsten Inert Gas) and MMA (Manual Metal Arc) / Stick welding, making it suitable for a range of applications from home DIY projects to auto repair and metal crafting.

Equipped with advanced IGBT inverter technology, the TIG-200 ensures stable performance and includes self-protective functions against over-voltage, vol-rendahtage, over-current, and overheating, enhancing safety and reliability. Its lightweight and robust design makes it a practical tool for various welding tasks.

The MMA welding function offers gas-free operation, ideal for non-technical users and DIY soldering, providing reliable and effective results.

2. Maklumat Keselamatan

Always prioritize safety when operating welding equipment. Failure to follow safety precautions can result in serious injury or death. Read and understand all safety warnings before use.

• Kejutan elektrik: Welding current can cause fatal electric shock. Ensure the machine is properly grounded. Do not touch live electrical parts. Wear dry welding gloves and protective clothing.
• Asap dan Gas: Welding produces fumes and gases that can be hazardous to your health. Work in a well-ventilated area. Use a fume extractor if necessary.
• Sinar Arka: Arc rays can burn eyes and skin. Wear a welding helmet with appropriate shade lenses and protective clothing (long sleeves, heavy pants, leather gloves).
• Kebakaran dan Letupan: Percikan api kimpalan dan logam panas boleh menyebabkan kebakaran. Jauhkan bahan mudah terbakar dari kawasan kimpalan. Sediakan alat pemadam api yang sedia ada.
• Bahagian Panas: Welded materials and equipment can remain hot for a long time after welding. Allow parts to cool before handling or wear appropriate heat-resistant gloves.
• bunyi bising: Welding operations can be noisy. Wear hearing protection.
• Perentak jantung: Magnetic fields from high currents can affect pacemakers. Consult your doctor before welding.

3. Kandungan Pakej

Upon unpacking, please verify that all items listed below are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

• 1 x Electric Welding Machine (CONENTOOL TIG-200)
• 1 x Welding Mask
• 1 x 135cm Ground Clamp
• 1 x Welding Brush
• 1 x 135cm Electrode Holder
• 1 x 400cm TIG Welding Gun
• 2 x 2.0mm Welding Rods
• 2 x 2.5mm Welding Rods
• 1 x Chuck
• 1 x Tali Bahu
• 1 x Long Hat
• 2 x Ceramic Sets
• 1 x Plastic Parts Set

4. Produk Lebihview

Familiarize yourself with the components and controls of your TIG-200 welding machine.

4.1. Panel hadapan

• Panel Digital: Displays welding current and other settings.
• TIG/MMA Mode Selection: Buttons to switch between TIG and MMA welding modes.
• Tombol Pelarasan Arus: Digunakan untuk menetapkan arus kimpalan (Amppemadam).
• Post Hooua Knob: Likely controls the gas post-flow time for TIG welding.
• TIG Welding Gun Interface: Connection point for the TIG torch.
• Electrode Holder Interface: Connection point for the MMA electrode holder.
• Tanah Clamp Antara muka: Connection point for the ground clamp.

4.2. Panel Belakang

• Suis kuasa: Turns the welding machine ON/OFF.
• Saluran masuk udara: Ensures proper airflow for cooling. Keep clear of obstructions.
• Kipas Penyejuk: Dissipates heat generated during operation.
• Input AC 1~220V: Sambungan input kuasa.
• GAS Connection: For connecting the shielding gas cylinder (required for TIG welding).

4.3. Dimensi

The compact design of the TIG-200 makes it portable and easy to store. Approximate dimensions are 260mm (Length) x 125mm (Width) x 190mm (Height).

5. Spesifikasi

Technical specifications for the CONENTOOL TIG-200 welding machine.

Note: The "Frequency" parameter in Figure 5.1 is interpreted as "Efficiency" (85%) for clarity, as typical welding machine frequency is measured in Hz.

6. Arahan Persediaan

Before beginning any welding operation, ensure the machine is placed on a stable, level surface in a well-ventilated area, away from flammable materials.

6.1. Sambungan Kuasa

• Ensure the welding machine's power switch is in the "OFF" position.
• Connect the power cord to a suitable 220V AC power outlet. Ensure the outlet is properly grounded and can handle the machine's power requirements.

6.2. Welding Cable Connections

The TIG-200 supports both TIG and MMA welding. Connect the cables according to the desired welding process.

6.2.1. For MMA (Stick) Welding

• Connect the electrode holder cable to the "Electrode holder interface" on the front panel.
• Sambungkan tanah clamp cable to the "Ground clamp interface" on the front panel.
• Pasang tanah tanahamp securely to the workpiece, ensuring good electrical contact.
• Insert the appropriate welding electrode into the electrode holder.

6.2.2. For TIG Welding

• Connect the TIG welding gun cable to the "TIG welding gun interface" on the front panel.
• Sambungkan tanah clamp cable to the "Ground clamp interface" on the front panel.
• Pasang tanah tanahamp dipasang dengan selamat pada benda kerja.
• Connect your shielding gas cylinder (e.g., Argon) to the "GAS" inlet on the back panel of the machine using a gas hose and regulator. Ensure all gas connections are tight to prevent leaks.
• Install the correct size tungsten electrode into the TIG torch and secure it with the chuck and long hat. Attach the ceramic nozzle (ceramic set) to the torch head.

7. Arahan Operasi

Once the machine is set up, you can begin welding. Always wear appropriate personal protective equipment (PPE) including a welding helmet, gloves, and protective clothing.

7.1. Menghidupkan dan Pemilihan Mod

• Turn the main power switch on the back panel to the "ON" position.
• The digital panel on the front will illuminate.
• Use the TIG/MMA mode selection buttons to choose your desired welding process.

7.2. Adjusting Welding Parameters

• Arus Kimpalan: Use the "Current Adjustment Knob" to set the desired amperage. Refer to welding charts or practice on scrap material to find the optimal current for your specific material thickness and electrode/tungsten size.
• TIG Post-Flow (for TIG welding): Adjust the "Post Hooua Knob" to set the gas post-flow time. This protects the hot weld puddle and tungsten electrode from atmospheric contamination after the arc is extinguished. A general rule is 1 second of post-flow per 10 amps arus kimpalan.

7.3. Proses Kimpalan

The TIG-200 features Smooth Arc, Hot Start, Anti Stick, and Arc Force for improved welding performance.

7.3.1. Kimpalan MMA (Batang)

• Strike the arc by lightly touching the electrode to the workpiece and quickly lifting it slightly to establish the arc.
• Maintain a consistent arc length and travel speed to create a uniform weld bead.
• The "Anti Stick" feature helps prevent the electrode from sticking to the workpiece, while "Hot Start" assists in easier arc ignition. "Arc Force" helps maintain a stable arc.

7.3.2. TIG Welding

• Ensure gas flow is established.
• Initiate the arc (typically by high-frequency start, which is implied by "High frequency spot welding" feature).
• Maintain a short arc length between the tungsten and the workpiece.
• Feed filler rod into the weld puddle as needed.
• The "Two-way gas saving" feature helps optimize gas consumption.

The TIG-200 is suitable for welding various materials including stainless steel, alloy steel, and non-ferrous metals, with welding thickness ranging from 0.5mm to 8mm, using tungsten electrodes from 1.6mm to 3.2mm.

8. Penyelenggaraan

Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum mesin kimpalan anda.

• Pembersihan: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the air inlets and cooling fan on the back panel. Ensure the machine is unplugged before cleaning.
• Pemeriksaan Kabel: Regularly inspect all welding cables, electrode holder, ground clamp, and TIG torch for signs of wear, cuts, or damage. Replace damaged components immediately.
• Sambungan: Ensure all electrical and gas connections are tight and secure.
• Tungsten Electrodes (TIG): Keep tungsten electrodes clean and properly sharpened for optimal arc stability and weld quality.
• Storan: Simpan mesin kimpalan di persekitaran yang kering dan bersih apabila tidak digunakan.

9. Penyelesaian masalah

This section addresses common issues you might encounter during operation. For problems not listed here, contact customer support.

10. Petua Pengguna

• Latihan pada Skrap: Before working on important projects, always practice on scrap pieces of the same material and thickness to dial in your settings and technique.
• Kebersihan adalah Kunci: For TIG welding especially, ensure your workpiece is meticulously clean. Any contaminants can lead to poor weld quality.
• Gas Management: For TIG welding, always ensure you have sufficient shielding gas. Running out of gas mid-weld can contaminate your tungsten and weld puddle.
• Pemilihan Elektrod: Use the correct type and size of electrode (for MMA) or tungsten (for TIG) for the material and thickness you are welding.
• Pengudaraan: Always ensure adequate ventilation to disperse welding fumes, even for short tasks.

11. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact the CONENTOOL customer service directly. Keep your purchase receipt as proof of purchase.