Manual+

Jebao ELW Series

Jebao ELW Series Aquarium Wave Pump

Variable Frequency Wave Pump for Silent Filtration and Water Circulation

pengenalan

Thank you for choosing the Jebao ELW Series Variable Frequency Wave Pump. This manual provides essential information for the safe and efficient operation of your new aquarium wave pump. The ELW series is designed to create natural wave patterns and water circulation in both fresh and saltwater aquariums, promoting a healthy environment for your aquatic life with its compact design and ultra-silent motor.

Jebao ELW Wave Pump and Controller
Figure 1: Jebao ELW Wave Pump and Controller

Arahan Keselamatan

Sila baca dan ikuti semua arahan keselamatan dengan teliti untuk mengelakkan kecederaan atau kerosakan pada produk.

  • Sentiasa putuskan bekalan elektrik sebelum melakukan sebarang penyelenggaraan atau pemasangan.
  • Jangan kendalikan pam jika kord kuasa atau palam rosak.
  • Pastikan pam terendam sepenuhnya di dalam air semasa operasi untuk mengelakkan terlalu panas.
  • This pump is designed for indoor aquarium use only.
  • Keep the controller dry and away from water splashes.
  • Do not attempt to disassemble or repair the pump or controller yourself. Contact qualified personnel for service.
  • Ensure the magnetic mount is securely attached to the aquarium glass, not exceeding the specified magnetic thickness.

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

  • Jebao ELW Wave Pump Unit
  • External Controller with Bluetooth
  • Power Adapter (Input: 110-240V AC, Output: 12V DC)
  • Gunung Magnetik
  • Manual Pengguna (dokumen ini)

Spesifikasi

The Jebao ELW series offers various models. Below are the specifications for the ELW-3 model. Other models (ELW-5, ELW-10, ELW-20, ELW-30) will have different flow rates and power consumption.

Jebao ELW-3 Model Specifications
Figure 2: ELW-3 Model Specifications
Ciri Specification (ELW-3 Model)
Saiz Tangki Disyorkan ≤40cm
Product Size (W×H) 39.5mm × 44mm
Magnetic Thickness ≤8mm
Input Voltage (Power Adapter) 110-240V AC
Keluaran Voltage (to Pump) DC 12V
kuasa 4.5W
Kadar Aliran 2500 L/J
bahan Rubber (Impeller components)
Keserasian Freshwater and Seawater Aquariums

Arahan Persediaan

  1. Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
  2. Pasang Pam:
    • Place the pump unit inside your aquarium, ensuring it is fully submerged.
    • Position the external magnetic mount on the outside of the aquarium glass, directly opposite the pump unit. The strong magnets will hold the pump in place.
    • Ensure the glass thickness does not exceed 8mm for secure mounting.
    ELW wave pump mounted in aquarium
    Figure 3: Wave pump mounted inside an aquarium
  3. Sambung ke Pengawal: Plug the pump's cable into the designated port on the ELW controller.
  4. Sambungkan Kuasa: Plug the power adapter into the controller, then plug the power adapter into a suitable electrical outlet. Do not power on the pump until it is fully submerged.
  5. Peletakan Awal: Adjust the pump's direction to achieve the desired water flow and wave pattern. Ensure there are no obstructions to the impeller.

Arahan Operasi

The ELW controller allows for various modes and adjustments to customize your aquarium's water movement.

Jebao ELW Controller Interface
Figure 4: ELW Controller Interface

Butang Pengawal:

  • Butang Kuasa (⏻): Menghidupkan/Mematikan pam.
  • Butang MOD: Cycles through different wave patterns/modes (e.g., constant flow, wave mode, random flow).
  • FREQ Button: Adjusts the frequency or intensity of the wave patterns.
  • Butang FEED: Activates a feeding mode, temporarily pausing the pump for a set duration to allow fish to eat without food being swept away.
  • Butang M1-M5: Preset memory buttons to save and recall your favorite settings.
  • M/S Button: Likely for switching between manual and synchronized modes (if multiple pumps are used).
  • Anak panah atas/bawah: Adjust parameters like flow rate or frequency within a selected mode.
  • Bluetooth: The controller supports Bluetooth connectivity for advanced control via a mobile application (refer to the app's instructions for pairing and usage).

Operasi Am:

  1. Hidupkan kuasa: Press the Power button to start the pump. The display will show the current mode and settings.
  2. Pilih Mod: Press the MODE button repeatedly until you find a wave pattern suitable for your aquarium.
  3. Adjust Frequency/Intensity: Use the FREQ button and/or the Up/Down arrows to fine-tune the wave intensity or flow rate.
  4. Simpan Tetapan: Once you have a desired setting, you can save it to one of the M1-M5 memory buttons by pressing and holding the desired memory button until the controller confirms the save.
  5. Mod Suapan: Press the FEED button to temporarily stop the pump. The pump will resume operation automatically after a set time (usually 10 minutes, check specific model behavior).

Penyelenggaraan

Regular maintenance ensures optimal performance and longevity of your Jebao ELW wave pump.

Compact Wide Impeller of ELW pump
Figure 5: Compact Wide Impeller for easy cleaning
  1. Putuskan Kuasa: Always unplug the power adapter from the wall outlet before performing any maintenance.
  2. Keluarkan Pam: Keluarkan unit pam dari akuarium dengan berhati-hati.
  3. Bongkar (jika perlu): Gently twist or unclip the pump casing to access the impeller chamber. The compact wide impeller design facilitates easy access.
  4. Pendesak Bersih: Remove the impeller and clean it thoroughly with a soft brush under running water. Remove any algae, debris, or calcium buildup. A mild vinegar solution can be used for stubborn calcium deposits, followed by a thorough rinse.
  5. Bersih Casing: Clean the pump casing and any intake/output grilles to ensure unrestricted water flow.
  6. Pasang semula: Carefully reassemble the pump, ensuring all parts are correctly aligned and securely fastened.
  7. Pasang semula: Place the pump back into the aquarium and reconnect the power. Ensure it is fully submerged before powering on.

Kekerapan: It is recommended to clean the pump every 2-4 weeks, depending on the bioload of your aquarium and the rate of debris accumulation.

Menyelesaikan masalah

Masalah Kemungkinan Punca Penyelesaian
Pam tidak dihidupkan
  • Tiada kuasa untuk keluar
  • Sambungan longgar
  • Damaged power adapter/controller
  • Periksa salur keluar kuasa dengan peranti lain.
  • Pastikan semua sambungan selamat.
  • Inspect power adapter and controller for visible damage.
Weak or no water flow
  • Impeller clogged with debris/algae
  • Calcium buildup on impeller
  • Pam tidak terendam sepenuhnya
  • Disconnect power, remove pump, and clean the impeller and casing thoroughly.
  • Pastikan pam terendam sepenuhnya.
Bunyi/getaran yang berlebihan
  • Pendesak terhalang atau rosak
  • Udara terperangkap dalam pam
  • Pemasangan yang tidak betul
  • Disconnect power, clean impeller, check for damage.
  • Gently shake the pump while submerged to release trapped air.
  • Ensure magnetic mount is secure and pump is not touching tank walls.
Paparan pengawal tidak berfungsi
  • Isu kuasa
  • Kerosakan pengawal
  • Periksa sambungan kuasa.
  • Contact customer support if power is confirmed but display remains off.

Petua pengguna

  • Placement for Optimal Flow: Experiment with different pump placements and angles to achieve the best water circulation and wave patterns for your specific tank layout and inhabitants. Aim to eliminate 'dead spots' where water movement is minimal.
  • Pengenalan Beransur-ansur: When introducing new fish or corals, start with a lower flow setting and gradually increase it over a few days to allow them to acclimate to the new water movement.
  • Feeding Mode Usage: Utilize the 'FEED' button during feeding times to prevent food from being immediately swept into overflows or filters, ensuring your aquatic life gets sufficient nutrition.
  • Regular Impeller Checks: Even if the pump seems to be running fine, a quick visual check of the impeller during routine tank maintenance can catch minor debris accumulation before it becomes a major issue.
  • Kawalan Bluetooth: If your model supports Bluetooth, download the official Jebao app for more precise control over modes, schedules, and custom wave patterns.

Waranti dan Sokongan

Untuk maklumat waranti, sokongan teknikal atau pertanyaan perkhidmatan, sila hubungi terus peruncit atau pengilang. Simpan resit pembelian anda sebagai bukti pembelian.

Pengeluar: Jebao

Asal: Tanah Besar China

Dokumen Berkaitan - ELW Series

Praview Jebao E Series Wavemaker Pump User Manual
User manual for the Jebao E Series Wavemaker Pump, detailing product features, specifications, installation, operation, maintenance, and troubleshooting.
Praview Jebao Jecod DMP Series Smart Wave Maker User Manual
Comprehensive user manual for the Jebao Jecod DMP series Smart Wave Maker, detailing installation, operation, app control, wave modes, troubleshooting, and maintenance for aquarium enthusiasts.
Praview Manual Pengguna Jebao Smart Wave Maker - Persediaan, Operasi dan Penyelesaian Masalah
Manual pengguna yang komprehensif untuk Jebao Smart Wave Maker (MCP, MLW, MOW SERIES), meliputi pemasangan, ciri, kawalan aplikasi melalui Jebao Aqua, pelbagai mod gelombang, penyelesaian masalah dan penyelenggaraan. Ketahui cara menyediakan dan mengendalikan pembuat gelombang Jebao anda untuk keadaan akuarium yang optimum.
Praview Manual Pengguna Pam Gelombang Rentas Aliran Jebao: CP-90, CP-120, CP-150
Manual pengguna untuk pam Jebao Cross-Flow Wave, model CP-90, CP-120 dan CP-150. Termasuk arahan keselamatan, panduan pemasangan, pengendalian pengawal, penyelenggaraan dan spesifikasi teknikal.
Praview Jebao RF-B Series Automatic Feeder User Manual
Comprehensive user manual for the Jebao RF-B Series Automatic Feeder, detailing installation, operation, features, maintenance, and troubleshooting for aquarium fish feeding.
Praview Jebao MDC Series Aquarium Pumps User Manual
User manual for Jebao MDC series aquarium pumps, detailing features, safety instructions, installation, operation, and technical specifications. Includes models MDC-2000 to MDC-10000.