RYE FIELD 5148 1/35 M1128 MGS Stryker Model Kit Instruction Manual

pengenalan

This manual provides detailed instructions for the assembly and care of your RYE FIELD 5148 1/35 M1128 MGS Stryker model kit. This kit features a completely new mold, accurately representing the M1128 Stryker Mobile Gun System (MGS) as it appeared after 2010, equipped with MILES (Multiple Integrated Laser Engagement System) Gear. The M1128 MGS is a wheeled self-propelled gun utilized by the US Army, armed with the M68A2 105mm tank gun. The MILES system is a training device that uses lasers and blank cartridges for realistic combat training simulations.

This kit also includes an upgrade set: the 2109 Sagged Wheel Set with Anti-Skid Chains, providing enhanced detail and realism for your model.

Kandungan Kit

Your RYE FIELD 5148 model kit includes the following components:

• Plastic sprues for the M1128 MGS Stryker vehicle body, turret, and various components.
• Photo-etched parts for fine details.
• Decals for markings and insignia.
• A 3D printed gun barrel for enhanced accuracy.
• Soft resin tires for realistic appearance.
• Springs for functional suspension.
• Additional sprues for MILES Gear.
• 2 pieces of sagged resin wheels with anti-skid chains (Upgrade Solution Series 2109).

Persediaan dan Perhimpunan

Assembly of this model kit requires precision and patience. Please read all instructions carefully before beginning. Tools such as plastic cement, hobby knife, tweezers, and paints are required (not included).

1. Penyediaan: Carefully remove all parts from the sprues using a hobby knife or sprue cutters. Clean any flash or mold lines with a hobby knife or fine sandpaper.
2. Pemasangan Casis: Begin by assembling the main chassis components. Pay close attention to the orientation of parts.
3. Suspension and Wheels: Install the suspension springs and components. The front four wheels are designed to be steerable. Attach the soft resin tires to the wheel hubs. For enhanced realism, use the sagged wheel set with anti-skid chains as per the upgrade kit instructions.
4. Butiran Dalaman: Assemble any interior components as indicated in the detailed diagrams.
5. Upper Hull and Turret: Construct the upper hull and turret sections. The main hatch can be assembled to be opened or closed.
6. persenjataan: Assemble the M68A2 105mm tank gun, utilizing the 3D printed gun barrel for superior detail.
7. MILES Gear: Attach the MILES Gear components to the designated areas on the vehicle.
8. Photo-Etched Parts: Carefully bend and attach photo-etched parts using super glue for intricate details.
9. Painting and Decals: Once the main assembly is complete, paint the model according to your desired scheme. After painting, apply the decals using decal setting solution for a seamless finish.

Ciri Operasi

Once assembled, your RYE FIELD M1128 MGS Stryker model features several dynamic elements:

• Steerable Front Wheels: The front four wheels can be posed in various steering angles, adding realism to display.
• Functional Suspension: The included springs allow for a degree of movement in the suspension, simulating the vehicle's real-world capabilities.
• Opening/Closing Main Hatch: The main hatch on the turret can be positioned open or closed, allowing for display of any interior details you choose to add.

Penyelenggaraan

To ensure the longevity and appearance of your model kit:

• Pembersihan: Dust your model regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials.
• Storan: Store the model in a cool, dry place away from direct sunlight to prevent fading of paint and decals, and warping of plastic parts.
• Pengendalian: Handle the model carefully, especially delicate parts like antennas, photo-etched details, and the gun barrel, to prevent breakage.

Menyelesaikan masalah

• Bahagian Tidak Sesuai: Ensure parts are properly cleaned of flash and sprue gates. Test fit parts before applying cement. If necessary, gently sand or trim mating surfaces.
• Pelekat Tidak Mematuhi: Ensure the surface is glossy and clean. Use decal setting solutions to help decals conform to irregular surfaces and adhere better.
• Warped Parts: Small warped plastic parts can sometimes be corrected by gently heating them with a hairdryer and bending them back into shape, then holding them until cool.
• Isu Cat: Ensure surfaces are clean and primed before painting. Apply paint in thin coats to avoid obscuring details.

Spesifikasi

Petua pengguna

• Dry Fit Everything: Before applying any glue, always dry fit parts to ensure a good fit and understand the assembly sequence.
• Thin Glue Application: Use plastic cement sparingly to avoid damaging details or creating unsightly glue marks.
• Pengudaraan: Work in a well-ventilated area when using glues, paints, and thinners.
• Reference Materials: Utilize historical photos or reference materials of the M1128 MGS Stryker to enhance accuracy in painting and detailing.

Maklumat Keselamatan

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Always use model-building tools and materials responsibly. Keep small parts away from young children to prevent choking hazards. Adult supervision is recommended for users under the age of 14.

Waranti dan Sokongan

For any missing or defective parts, please contact the retailer or manufacturer directly with your proof of purchase. RYE FIELD is committed to providing high-quality model kits. Please refer to the packaging for specific contact information or visit the official RYE FIELD webtapak untuk sokongan.