Security Solar Light with Motion Sensor and Fake CCTV Deterrent

1. Pengenalan

Terima kasih kerana membeliasing the K2178 Security Solar Light. This innovative outdoor lighting solution combines efficient solar power with a motion-activated 77 LED floodlight and a realistic fake CCTV camera design to deter potential intruders. Its wireless and waterproof design ensures reliable performance in various outdoor environments. Please read this manual carefully to ensure proper installation and operation.

2. Kandungan Pakej

Sila tandai kotak untuk item berikut:

• 1 x LED Solar Lamp (K2178)
• 1 x Manual Arahan
• 1 x Alat Kawalan Jauh
• 4 x Skru Pemasangan
• 1 x Kotak

Image: The K2178 solar light, remote control, instruction manual, and mounting screws.

3. Spesifikasi

Imej: Dimensi produk.

4. Pemasangan

The K2178 Security Solar Light is designed for easy, self-contained wall mounting. Follow these steps for optimal performance:

1. Pilih Lokasi: Select a location that receives direct sunlight for 6-8 hours daily to ensure the solar panel charges effectively. The recommended mounting height is 3-10 inches for optimal motion detection.
2. Tandai Lubang Gerudi: Hold the mounting bracket against the wall at your desired location and mark the positions for the three screw holes.
3. Lubang gerudi: Use a drill to create three holes at the marked positions.
4. Insert Expansion Plugs: Insert the provided expansion plugs into the drilled holes.
5. Pasang Cahaya: Align the mounting bracket with the expansion plugs and secure the light using the provided screws. Tighten firmly.
6. Laraskan Sudut: Lamp head features a 360° rotating bracket, allowing you to adjust the lighting and detection angle as needed.

Imej: Panduan pemasangan langkah demi langkah.

Image: 360° rotating bracket for flexible positioning.

5. Operasi

The K2178 solar light operates automatically from dusk to dawn and can be controlled via the integrated ON/OFF switch or the included remote control.

5.1 Persediaan Awal

Before first use, ensure the product switch is turned ON. Allow the solar light to charge under direct sunlight for at least 8 hours to activate the battery. Remove the insulating paper from the remote control's battery compartment before use.

Image: Detail of 77 LED High Light Beads, ON/OFF Switch, and Solar Panels.

5.2 Mod Pencahayaan

The light features three distinct operating modes, selectable via the remote control:

• Mode 1 (Sensor Mode): When motion is detected, the light turns on at full brightness. After approximately 15 seconds of no motion, the light turns OFF. Red warning lights may flash.
• Mode 2 (Slight Light Mode): The light stays dim to conserve power. When motion is detected, it becomes fully bright as a warning. After approximately 15 seconds of no motion, it returns to dim light. Red warning lights may flash.
• Mode 3 (Dim Light Mode): The light maintains a continuous dim illumination throughout the night.

Image: Diagram of the three lighting modes.

5.3 Fungsi Kawalan Jauh

The remote control allows you to switch between modes and turn the light ON/OFF:

• ON: Menghidupkan lampu.
• MATI: Mematikan lampu.
• MOD 1: Activates Sensor Mode.
• MOD 2: Activates Slight Light Mode.
• MOD 3: Activates Dim Light Mode.
• SOS: Activates an emergency lighting situation (automatically lit).

Image: Remote control functions.

6. Pengecasan Suria

The K2178 light is powered by a built-in lithium battery that charges via its integrated polycrystalline silicon solar panel. It charges during the day and automatically illuminates at night, providing zero electricity cost.

• Pengecasan Siang: Panel solar memerlukan 6-8 jam cahaya matahari langsung untuk mengecas bateri sepenuhnya.
• Operasi waktu malam: A fully charged battery can provide 8-10 hours of illumination.

Image: Solar charging and auto lighting cycle.

7. Penyelenggaraan

To ensure the longevity and optimal performance of your solar light:

• Panel Suria Bersih: Kerap mengelap panel solar dengan lembut, damp kain untuk menanggalkan habuk, kotoran atau serpihan yang boleh menghalang penyerapan cahaya matahari.
• Halangan yang jelas: Ensure no trees, buildings, or other objects block direct sunlight from reaching the solar panel.
• Penjagaan Bateri: The built-in lithium battery is designed for durability. Avoid prolonged storage in a completely discharged state.
• Rintangan Cuaca: The IP66 waterproof rating ensures the light is protected against rain, snow, heat, and frost. However, extreme weather conditions may temporarily affect performance.

Image: IP66 Waterproof and all-weather suitability.

8. Penyelesaian masalah

• Lampu tidak menyala pada waktu malam:
  • Ensure the main switch is ON.
  • Verify the solar panel is receiving sufficient direct sunlight (6-8 hours) during the day.
  • Check if the remote control's insulating paper has been removed.
• Light is dim or short-lived:
  • The battery may not be fully charged. Ensure the solar panel is clean and exposed to direct sunlight.
  • Consider the weather conditions; cloudy days reduce charging efficiency.
• Penderia gerakan tidak berfungsi:
  • Pastikan lampu berada dalam Mod 1 atau Mod 2.
  • Periksa halangan yang menyekat medan sensor view.
  • Verify the sensor distance (4-10 meters) and angle (120°) are appropriate for your setup.
• Alat kawalan jauh tidak bertindak balas:
  • Remove and reinsert the insulating paper from the remote control.
  • Ensure the light's main switch is ON.

9. Petua Pengguna

• For best security, mount the light in a prominent location where the fake CCTV design is clearly visible.
• Experiment with the three lighting modes to find the best balance between security and energy saving for your specific needs.
• Regularly check the solar panel for any accumulation of snow or leaves, especially during winter or autumn, to maintain charging efficiency.
• The 360° rotating bracket is very useful; adjust it to cover the most critical areas for motion detection and illumination.

10. Waranti dan Sokongan

This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims. For technical support or warranty inquiries, please contact your retailer or the manufacturer's customer service.