1. Produk Lebihview
The TDA-08 series is a versatile rail-type weighing force transmitter and weight sensor signal amplifier designed for industrial applications. It integrates force measurement, weighing, display, and control functions into a single compact unit. This device is suitable for various weighing and force measurement systems, providing accurate signal amplification and processing.
Ciri-ciri Utama
- Integrates force measurement, weighing, display, and control functions.
- Internal integrated switching power supply, operating voltagjulat e: 10V hingga 30V.
- Equipped with an analog filtering function for stable readings.
- Automatic error diagnosis for easy identification and resolution of issues.
- Features automatic zero tracking.
- Supports automatic zeroing upon power-up.
- Configurable zero range and filter intensity.
2. Maklumat Keselamatan
Please read and understand all safety instructions before installation, operation, or maintenance of the TDA-08 series device. Failure to follow these instructions may result in injury or damage to the equipment.
- Pastikan bekalan kuasa voltage is within the specified range (10V-30V DC).
- Semua pendawaian hendaklah dilakukan oleh kakitangan yang berkelayakan dan mengikut kod elektrik tempatan.
- Putuskan kuasa sebelum membuat sebarang sambungan atau melakukan penyelenggaraan.
- Avoid exposing the device to excessive moisture, dust, or extreme temperatures.
- Do not open the device enclosure unless specifically instructed to do so by a qualified technician.
3. Pemasangan dan Persediaan
3.1 Membongkar
Carefully remove the TDA-08 unit from its packaging. Inspect the device for any signs of physical damage. Retain the packaging for future transport or storage.
3.2 Pemasangan
The TDA-08 series is designed for rail mounting. Securely attach the device to a standard DIN rail in a suitable enclosure, ensuring adequate ventilation and protection from environmental factors.
3.3 Pendawaian
Refer to the terminal block labels on your specific TDA-08 model (TDA-08A, TDA-08B, or TDA-08C) for correct connections. Typical connections include:
- Input Kuasa: Connect 10V-30V DC power to the designated power terminals (e.g., +V, -V, GND).
- Load Cell/Sensor Input: Connect the load cell or weight sensor to the input terminals (e.g., E+, E-, S+, S-). Ensure correct polarity.
- Keluaran Analog: Connect to external control systems or displays via analog output terminals (e.g., OUT, AO).
- Input/Output Digital: If applicable, connect control signals to digital input (e.g., IN) and output (e.g., OUT1, OUT2, OUT3) terminals.
Always consult the detailed wiring diagram specific to your TDA-08 model and application. If unsure, seek assistance from a qualified electrician or system integrator.
3.4 Kuasa Permulaan
After all connections are securely made, apply power to the device. The display should illuminate, and the device may perform an automatic zeroing sequence. Observe the display for any error messages or unexpected behavior.
4. Operasi
The TDA-08 series features a digital display and control buttons for easy operation. Specific button functions may vary slightly between models (TDA-08A, TDA-08B, TDA-08C).
4.1 Paparan Terlaluview
The digital display shows the current measured value (e.g., weight, force). Indicators (e.g., NET, PWAK, Kg, g, N, KN) provide additional status information.
4.2 Basic Weighing/Measurement
Once powered on and calibrated, the device will continuously display the measured value from the connected sensor. Place the item to be weighed or apply force to the sensor.
4.3 Sifar
To set the current reading to zero (e.g., to tare a container), press the SIFAR button. The device supports automatic zero tracking and power-up zeroing.
4.4 Penentukuran
Calibration is crucial for accurate measurements. To enter calibration mode, typically press and hold the SET/CALI button. Follow the on-screen prompts to perform a multi-point calibration using known weights or force standards. Refer to the specific model's detailed instructions for the exact calibration procedure.
4.5 Menetapkan Parameter
The device allows configuration of various parameters such as zero range, filter intensity, and output settings. Access the settings menu by pressing the SET/CALI button (or similar, depending on model). Use the navigation buttons (e.g., UP/DOWN arrows, SWITCH, OFTEN) to adjust values and confirm selections.
5. Penyelenggaraan
The TDA-08 series is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity and performance:
- Pembersihan: Pastikan peranti bersih dan bebas daripada habuk dan serpihan. Gunakan kain lembut dan kering untuk pembersihan. Jangan gunakan pembersih atau pelarut yang melelas.
- Pemeriksaan: Periksa semua sambungan pendawaian secara berkala untuk kesesakan dan tanda-tanda haus atau kakisan.
- Persekitaran: Pastikan persekitaran operasi kekal dalam julat suhu dan kelembapan yang ditetapkan.
- Penentukuran semula: Recalibrate the device periodically or if you suspect measurement inaccuracies.
6. Penyelesaian masalah
The TDA-08 series includes automatic error diagnosis to help identify and resolve common issues. If you encounter a problem, refer to the table below:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan kosong | Tiada kuasa atau vol tidak betultage. | Periksa sambungan bekalan kuasa dan voltage (10V-30V DC). |
| Bacaan tidak tepat | Needs calibration; sensor issue; environmental interference. | Perform calibration. Check sensor wiring and integrity. Ensure stable operating environment. |
| Display shows "OVER" or "UNDER" | Sensor overload/underload; incorrect range setting. | Ensure load is within sensor capacity. Check and adjust range settings if configurable. |
| Tiada respons daripada butang | Device frozen; button malfunction. | Power cycle the device. If problem persists, contact support. |
| Bacaan tidak stabil | Electrical noise; mechanical vibration; filter intensity too low. | Check for sources of electrical interference. Reduce vibrations. Increase filter intensity in settings. |
7. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Model | TDA-08 Series (TDA-08A, TDA-08B, TDA-08C) |
| Jenis Tetap | Magnetic Fastener (for mounting) |
| guna | Window (likely refers to display window) |
| Vol Operasitage | 10V ~ 30V DC |
| Filtering Function | Penapisan analog |
| Diagnosis Ralat | Automatik |
| Penjejakan Sifar | Automatik |
| Power-up Zeroing | Automatik |
| Parameter yang boleh dikonfigurasi | Zero range, filter intensity, etc. |
| asal usul | Tanah Besar China |
Dimensi dan Berat
- Device Dimensions (L x H x D): 88mm x 53mm x 59mm (including rail mount)
- Dimensi Pakej (L x W x H): 23 cm x 11 cm x 7 cm
- Berat Pakej: 0.8 kg
8. Petua Pengguna
Manakala petua pengguna khusus daripada reviews or Q&A are not available, here are some general recommendations for optimal use:
- For critical applications, always verify calibration regularly.
- If experiencing signal noise, ensure proper grounding of the system and use shielded cables for sensor connections.
- Keep a record of your calibration dates and any parameter changes.
9. Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please contact your vendor or the manufacturer directly. Ensure you have your product model and serial number (if applicable) ready when contacting support.
