CYCLAMI CY110 Smart Bike Tail Light User Manual

1. Produk Lebihview & Kandungan Pakej

The CYCLAMI CY110 is an intelligent brake tail light designed to enhance cycling safety with its smart sensing features and multiple lighting modes.

Kandungan Pakej:

• CYCLAMI CY110 Tail Light
• S10 Seatpost Strap Base
• Kabel Pengecas USB Jenis-C
• Manual Arahan

2. Persediaan

2.1 Charging the Tail Light

1. Locate the Type-C charging port on the tail light.
2. Connect the provided Type-C USB charging cable to the tail light and a suitable USB power source (e.g., computer, USB wall adapter).
3. The red light will flash to indicate that charging is in progress.
4. Once charging is complete, ensure to cover the silicone sheet protecting the charging port to maintain its waterproof integrity.

Hayat Bateri: Approximately 3.5 hours in 'Always-on' mode, and about 6 hours in other modes.

2.2 Seat Post Bracket Installation

1. Take the S10 Seatpost Strap Base.
2. During installation, ensure the thicker side of the strap base faces downward, and the narrower side faces upward.
3. Securely attach the strap base to your bicycle's seat post using the silicone strap.
4. Ensure the bracket is securely installed to guarantee riding safety.

2.3 Pemasangan Lampu Belakang

1. Once the strap base is securely mounted, align the CYCLAMI CY110 Tail Light with the bracket.
2. Gently push the tail light onto the bracket until you hear a clicking sound, indicating that the lock is engaged.
3. Verify that the tail light is firmly attached and does not wobble.

3. Arahan Operasi

3.1 Hidupkan/Mati Kuasa

• To turn on the tail light: Press and hold the power button for 1 to 3 seconds.
• To turn off the tail light: Press and hold the power button for 1 to 3 seconds.

3.2 Switching Lighting Modes

Once the tail light is on, press the power button briefly to cycle through the available lighting modes:

• Ever Bright: Pencahayaan berterusan.
• kilat: Berkelip secara berkala.
• Kilat perlahan: Slower flashing pattern.
• Respiratory Flash: Gradual dimming and brightening effect.

3.3 Intelligent Brake Sensing Function

The tail light features an intelligent brake sensing function:

• When the device senses that you are slowing down or braking, the lamp beads will automatically increase in brightness by 20% for 5 seconds.
• After 5 seconds, the light will return to its pre-brake lighting mode.
• This feature enhances visibility and alerts others to your deceleration.

3.4 Vibration Sensor & Automatic Wake-up

The CY110 is equipped with a vibration sensor for smart power management:

• If the tail light detects 30 seconds of standstill, it will enter a dormant state.
• After 30 minutes of inactivity, the tail light will perform a forced shutdown to conserve battery. To reactivate, you will need to long-press the power button.
• The light will automatically wake up from dormancy upon detecting vibration (movement), displaying its pre-sleep mode.

4. Penyelenggaraan

4.1 Pembersihan

• Wipe the tail light with a soft, damp kain untuk menghilangkan kotoran dan habuk.
• Do not use abrasive cleaners or solvents, as they may damage the surface or internal components.

4.2 Penyimpanan

• Store the tail light in a cool, dry place when not in use.
• Jika menyimpan untuk tempoh yang lama, cas bateri secara berkala (cth., setiap 3 bulan) untuk mengekalkan kesihatan bateri.

4.3 Kalis air

The CYCLAMI CY110 has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. However, it is not designed for submersion. Ensure the Type-C charging port cover is securely closed after charging to maintain its waterproof capabilities.

5. Penyelesaian masalah

• Lampu tidak menyala: Ensure the battery is charged. Press and hold the power button for 1-3 seconds to power on.
• Mod cahaya tidak berubah: Briefly press the power button to cycle through modes. If unresponsive, try turning the device off and on again.
• Brake sensing not working: Ensure the light is securely mounted and the sensor is not obstructed. The sensor reacts to deceleration, not just light changes.
• Lampu terpadam tanpa diduga: The device has an automatic shutdown feature after 30 minutes of inactivity. Long-press the power button to restart. Ensure the battery is sufficiently charged.
• Isu pengecasan: Verify the Type-C cable is properly connected and the power source is functional. The red light should flash during charging.

6. Spesifikasi

7. Petua Pengguna

• Visibility is Key: Always ensure your tail light is clean and fully charged before each ride, especially in low-light conditions or at night.
• Pemasangan selamat: Double-check that the tail light is securely clicked into its bracket to prevent it from falling off during bumpy rides.
• Optimumkan Hayat Bateri: Utilize the intelligent vibration sensor and automatic wake-up feature to conserve battery during stops. For longer rides, consider using flashing modes which generally consume less power than constant 'Ever Bright' mode.
• Brake Sensing Awareness: Familiarize yourself with how the brake sensing function works. It's a great safety feature, but always ride defensively.

8. Waranti dan Sokongan

For warranty information, technical support, or any product-related inquiries, please contact the CYCLAMI Official Store or your point of purchase. Keep your purchase receipt as proof of purchase for warranty claims.