Manual Pengguna Pengawal ECHTPower Wireless Pro

pengenalan

Terima kasih kerana membeliasing the ECHTPower Wireless Pro Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller, ensuring an optimal gaming experience across multiple platforms including Nintendo Switch, iOS, Android, and PC. Please read this manual thoroughly before use and keep it for future reference.

Kandungan Pakej

Sila semak pakej untuk memastikan semua item ada:

• Wireless Controller x 1
• Kabel Pengecasan (USB-C) x 1
• Manual Arahan x 1

Spesifikasi

Gambarajah Produk

Familiarize yourself with the layout of your ECHTPower Wireless Pro Controller:

Rajah 1: Depan view of the ECHTPower Wireless Pro Controller.

Rajah 2: Belakang view of the controller with MR/ML buttons and switches.

Susun atur butang:

• Depan: Home, Turbo (+), Screen Capture (-), A/B/X/Y, Left Joystick/L3, Right Joystick/R3, D-pad, M Button.
• Atas: R Button, L Button, Charging Indicator, Pairing Button, Type-C Charging Port, Channel LED.
• Bawah: ZR Button, ZL Button, ML Button, MR Button, Vibration Switch, Light Switch Key.

Persediaan dan Sambungan

Initial Activation & Power Management:

• Penggunaan Awal: Before first use, the controller must be charged using the provided USB-C data cable to activate it. Connect the controller to a power source (e.g., Switch dock or AC adapter).
• Hidupkan kuasa: Press the Home button lightly.
• Matikan: Press the pairing button lightly.
• One-Tap Wake-Up: When connected to a Nintendo Switch, press the Home button to instantly wake your Switch from sleep mode.

Connection Methods for Various Devices:

The controller supports both wired and wireless connections across multiple platforms.

Note for Nintendo Switch Wired Connection: Ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Switch console.

Arahan Operasi

Turbo Rapid Fire Function:

Supported buttons: A, B, X, Y, L, R, ZL, ZR, D-pad.

• Turbo Manual: Hold the 'T' button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
• Turbo Automatik: Hold the 'T' button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
• Lumpuhkan Turbo: Hold the 'T' button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
• Kosongkan Semua Tetapan Turbo: Press and hold the 'T' button for 3 seconds to clear rapid fire settings for all buttons.
• Pelarasan Kelajuan: Rapid fire speed can be adjusted to fast, medium, or slow. The default is slow. Hold the 'T' button on the controller and simultaneously move the right joystick up or down to adjust the speed.

Macro Setting for Back Buttons (ML/MR):

Supported buttons for mapping: A, B, X, Y, L, R, ZL, ZR, L3, R3, D-PAD.

• Memasuki Mod Pengaturcaraan: Press and hold the 'M' button for 2 seconds. The left and right 3D rings will slowly flash (requires LED effects to be enabled), indicating the controller has entered programming mode.
• Mapping a Button: While in programming mode, press the button you want to program (map). The left and right 3D rings will flash quickly.
• Programming Confirmation: Press either the 'ML' or 'MR' button. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming.
• Nota: You can program up to 16 buttons. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
• Clearing Settings: After holding the 'M' button for 2 seconds and seeing the left and right 3D rings flash slowly, press 'ML' or 'MR' to clear the programmed back button settings.

Light Adjustment (RGB Lighting):

Customize the 9-color RGB lighting effects on your controller.

• Menukar Mod: Press 'Light Key' + 'R3' to cycle between 3 modes: Steady, Breathing/Running Horse, and Rainbow.
• Pelarasan Warna: Press 'Light Key' + 'L3'.
  • In Steady mode: Switch colors.
  • In Breathing/Running Horse mode: No effect.
  • In Rainbow mode: Pause the rainbow effect.
• Reset Lights to Default: Press the '+' and 'Turbo' buttons simultaneously for 3 seconds. The motor will vibrate briefly, and the lights will reset to their default settings.
• Turn On/Off Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold it again for 10 seconds to reactivate.

Pelarasan Getaran:

The controller features dual motors with adjustable vibration intensity.

• Laraskan Intensiti: After connecting the controller, hold the vibration button on the back of the controller while moving the left 3D joystick up or down to increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment.
• Tahap Intensiti: Four intensity levels are available: 100% (Strong), 70% (Medium - default), 30% (Weak), and 0% (Off).
• Disable/Enable Vibration: Press and hold the vibration switch for 10 seconds to disable the vibration function of both motors. Press and hold the vibration switch again for 10 seconds to re-enable the vibration function.

Pengurusan Bateri

mengecas:

• Connect the controller to an adapter using the provided USB-C data cable.
• The orange charging indicator will remain lit while charging.
• Once fully charged, the orange charging indicator will turn off.
• A full charge takes approximately 2.5 hours and provides 10-16 hours of usage time.

Penunjuk Bateri Rendah:

When the battery is low, the light of the current channel will flash quickly as a reminder to charge the controller.

Mod bersedia:

• Manual Standby: When the controller is powered on, short press the "Pairing" button to enter standby mode.
• Automatic Standby (Pairing): If the controller is in pairing mode and fails to pair after 60 seconds, it will automatically enter standby mode.
• Automatic Standby (Inactivity): When the controller is connected to a console but remains inactive for 15 minutes, it will automatically enter standby mode.

Penyelenggaraan

• Pastikan pengawal bersih dengan mengelapnya dengan kain lembut dan kering.
• Avoid exposing the controller to liquids, excessive dust, or extreme temperatures.
• Simpan pengawal di tempat yang sejuk dan kering apabila tidak digunakan.
• Do not attempt to disassemble or repair the controller yourself, as this may void the warranty and cause damage.

Menyelesaikan masalah

• Controller Malfunction/Unresponsive: If the controller malfunctions or becomes unresponsive, you can reset it by pressing and holding the "HOME" button for 10 seconds.
• Isu Sambungan: Ensure the controller is fully charged. For wireless connections, verify the correct pairing combination for your device (refer to the "Connection Methods" table). For wired Switch connections, confirm "Pro Handle Wired Connection" is enabled in Switch settings.
• Drift Issues: The controller features Hall Effect Joysticks designed to prevent drift. If you experience any unusual input, try resetting the controller.
• Interference (FCC): If the equipment causes harmful interference to radio or television reception, try the following: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer/technician.

Petua pengguna

• Experiment with the different RGB lighting modes and colors to personalize your gaming setup.
• Utilize the programmable back buttons (ML/MR) for frequently used in-game actions or complex combos to gain a competitive edge.
• Adjust the vibration intensity to your preference for a more immersive or less distracting gaming experience.
• Remember to enable "Pro Handle Wired Connection" in your Nintendo Switch settings for optimal wired performance.

Langkah-langkah Keselamatan

• Do not expose the controller to liquid.
• Jangan buka pengawal.
• Avoid dropping the controller.
• Avoid exposing the controller to extremely high or low temperatures.
• Dispose of the product and rechargeable battery responsibly at an appropriate collection point for recycling, in accordance with local regulations. Do not dispose of with household waste.

Waranti & Sokongan

This product comes with a 12-month warranty for worry-free gaming.

For technical support, warranty claims, or any inquiries, please contact ECHTPower customer service:

• e-mel: service@echtpower.com
• Webtapak: www.echtpower.com
• telefon: 0755-21010839

Pengilang: Shenzhen Mike Morgen Technology Co., Ltd

Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen.

A detailed user manual in PDF format is also available for download on the manufacturer's webtapak.

Maklumat Kawal Selia

Declaration of Conformity (CE):

Model: ES01

The product conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that the ES01 radio equipment conforms to Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

Teks penuh Pengisytiharan Pematuhan EU boleh didapati di: www.echtpower.com

Pengisytiharan UKCA:

The product conforms to UK standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that the ES01 radio equipment conforms to Directive EN IEC 62368-1:2020; BS EN 50663:2017, BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

Teks penuh Pengisytiharan Pematuhan UKCA boleh didapati di: www.echtpower.com

Penyata FCC:

Peranti ini mematuhi Bahagian 15 Peraturan FCC. Pengendalian tertakluk kepada dua syarat berikut: (1) Peranti ini tidak boleh menyebabkan gangguan berbahaya, dan (2) Peranti ini mesti menerima sebarang gangguan yang diterima, termasuk gangguan yang boleh menyebabkan operasi yang tidak diingini.

Amaran FCC: Sebarang perubahan atau pengubahsuaian yang tidak disetujui secara tegas oleh pihak yang bertanggungjawab terhadap pematuhan dapat membatalkan hak pengguna untuk mengendalikan peralatan tersebut.

Nota: Peralatan ini telah diuji dan didapati mematuhi had untuk peranti digital Kelas B, menurut bahagian 15 Peraturan FCC. Had ini direka bentuk untuk memberikan perlindungan yang munasabah terhadap gangguan berbahaya dalam pemasangan kediaman. Peralatan ini menjana kegunaan dan boleh memancarkan tenaga frekuensi radio dan, jika tidak dipasang dan digunakan mengikut arahan, boleh menyebabkan gangguan berbahaya kepada komunikasi radio. Walau bagaimanapun, tiada jaminan bahawa gangguan tidak akan berlaku dalam pemasangan tertentu. Jika peralatan ini menyebabkan gangguan berbahaya kepada penerimaan radio atau televisyen, yang boleh ditentukan dengan mematikan dan menghidupkan peralatan, pengguna digalakkan untuk cuba membetulkan gangguan dengan satu atau lebih daripada langkah berikut:

• Arahkan semula atau letakkan semula antena penerima.
• Tingkatkan pemisahan antara peralatan dan penerima.
• Sambungkan peralatan ke dalam alur keluar pada litar yang berbeza daripada yang disambungkan kepada penerima.
• Rujuk pengedar atau juruteknik radio/TV yang berpengalaman untuk mendapatkan bantuan.

Peranti telah dinilai untuk memenuhi keperluan pendedahan RF am. Peranti boleh digunakan dalam keadaan pendedahan mudah alih tanpa sekatan.

ID FCC: 2A88F-ES01