Manual Produk Pad Kegembiraan Tanpa Wayar NYXI Wizard

pengenalan

Pemain yang dihormati,

Terima kasih kerana membeliasing the NYXI Wizard Wireless Joy-pad. This manual provides detailed instructions for setting up, operating, and maintaining your new controller. Please read it carefully before use to ensure optimal performance and a better gaming experience.

Nota: For a better gaming experience, please fully charge the controller when using it for the first time.

Kandungan Pakej

Pastikan semua item berikut disertakan dalam pakej anda:

• 1 x Left-hand handle
• 1 x Right-hand handle
• 1 x Kabel Pengecas USB
• 1 x Manual Pengguna
• 1 x Intermediate bridge (Frame)
• 2 x Round replacement rocker rings

Spesifikasi

Panduan Persediaan

1. Wired Direct Connection

To connect the Joy-pad directly to your Nintendo Switch console, slide the left and right handles onto the sides of the console until they click into place. The console will automatically recognize the controllers.

Diagram: Wired direct connection to the console.

2. Sambungan Tanpa Wayar

Untuk menyambung secara wayarles:

1. Open your Nintendo Switch console.
2. Navigasi ke: Tetapan Sistem > Pengawal dan Penderia > Tukar Pegangan/Pesanan.
3. On the NYXI Wizard Joy-pad, long-press the SYNC key. The four channel lights on the controller will flash.
4. The Joy-pad will automatically connect to the console.

Image: Pressing the SYNC button for wireless pairing.

3. Arahan Mengecas

• When the controller is turned off and charging, the LEDs will flash. They will turn off once fully charged.
• When charging wirelessly, the corresponding channel light will flash slowly. It will stay on solid when fully charged.
• The controller can also be charged by attaching it to the Switch console, which is then connected to a power adapter. If the console is not plugged into a power adapter, it will charge the controller when the controller's voltage berada di bawah 3.7V.
• Penggera Bateri Rendah: If the controller battery voltage drops below 3.3V, the corresponding channel light will flash, indicating that charging is required.

4. Wake Up Function

You can wake up the controller from sleep mode by pressing any button, except for L3, R3, TURBO, Profile, FL, and FR buttons. The controller will then attempt to reconnect to the console.

Nota: Do not touch the 3D joystick during the connection process to avoid accidental input.

Arahan Operasi

1. Turbo Function and Speed Adjustment

The Turbo function allows for rapid, repeated input of a button.

• Mod Tetapan: Tekan TURBO + any settable function button (UP, DOWN, LEFT, RIGHT, A, B, X, Y, L, R, ZL, ZR).
• Mod Berterusan:
  1. Tekan TURBO + function button once for manual continuous turbo.
  2. Tekan TURBO + function button twice for automatic continuous turbo.
  3. Tekan TURBO + function button three times to turn off continuous turbo.
• Cancel All Turbo: Tekan lama TURBO for three seconds to cancel the burst function for all buttons.
• Pelarasan Kelajuan Turbo:
  • Left-hand grip: Press TURBO + - (minus button)
  • Right-hand grip: Press TURBO + + (plus button)

  Adjustable burst speeds: 5HZ, 12HZ, 20HZ. The default speed is 12HZ.

• Turbo Setting Indicator: The LED lights up white when the button is not set. It turns blue after setting and flashes blue with the burst speed when active.

2. Back-Button Mapping & Macro Programming

The controller must be connected to the console. Please cancel any continuous turbo settings before programming.

• Back Button Mapping Method:
  • Left Back Button (FL): Tekan Profile + any settable button on the left (UP, DOWN, LEFT, RIGHT, L, ZL, L3, VRL) + Profile.
  • Right Back Button (FR): Tekan Profile + any settable button on the right (A, B, X, Y, R, ZR, R3, VRR) + Profile.

  The FL and FR buttons can record up to 21 button values, and the output will follow the time interval of the entry.
• Back Button Setting Indicator: The first time you press the Profile button for setting, the LED will change from white to blue and flash. After the setting is complete, pressing the Profile button will show a solid blue light.
• Clear Back Button Settings: When connected to the host, hold both the left and right handle Profile buttons for 3 seconds. The original functions set on the FL and FR buttons will be cleared, and the LED will turn to a long white light.

3. Motor Vibration Adjustment

Adjust the intensity of the motor vibration:

• Kaedah Pelarasan: While connected, press TURBO + (corresponding) joystick up to enhance vibration, or turun to weaken it. A 2-second vibration prompt will confirm successful adjustment.
• Tahap Getaran: 100% - 70% - 30% - 0%. The default intensity is 70%.

Image: Adjustable vibration rumble levels.

4. ABXY Light Adjustment

The ABXY buttons feature adjustable illumination:

• While connected, press TURBO + double-click the right joystick to turn the light effect on or off.
• Tekan TURBO + long-press the right joystick to adjust the brightness of the ABXY buttons.

Image: Illuminated ABXY buttons.

5. Factory Setting "Lock Mode"

This mode prevents accidental input or changes to settings.

• Kaedah Penetapan: When the controller is in sleep mode, press and hold the "SL" dan "SYNC" buttons for 5 seconds. The channel indicator LED1 will light up and flash slowly 3 times.
• Buka Kunci Mod: To unlock, charge the controller with a USB cable while it is mounted on the Switch console rail.

6. Rocker Ring Replacement

The joystick rings are interchangeable for different gaming preferences (e.g., round for racing, octagonal for fighting games).

Image: Interchangeable Joystick Rings.

1. Step 1: Rotate the Rocker Ring
   Rotate the rocker circle alignment line counter-clockwise until it forms a 45° angle with the handle alignment point.


Diagram: Rotate the rocker ring to a 45-degree angle.

2. Step 2: Remove the Rocker Ring
   Pull up the rocker ring and rocker cap vertically to remove them.


Diagram: Pull up the rocker ring and cap.

3. Step 3: Install the New Rocker Ring
   Place the new rocker ring pins against the handle alignment point and press down firmly.


Diagram: Press the new rocker ring into position.

4. Step 4: Secure the Rocker Ring
   Rotate the rocker ring 45° clockwise to align the rocker ring alignment line with the handle alignment point, securing the replacement.

7. Calibration Rocker

To calibrate the joysticks and prevent drift:

1. Connect the controller to the Switch console.
2. Pergi ke Tetapan Sistem > Pengawal dan Penderia > Kalibrasi Kayu Kawalan.
3. Select the joystick you wish to calibrate and press the X butang, kemudian A butang.
4. Follow the on-screen prompts to move the stick up, down, left, right, and in a circle.

Image: Nintendo Switch joystick calibration screen.

Nota: If the cursor bounces outside the innermost circle during calibration, press the B button to exit and correct it again.

Petua pengguna

• This controller is compatible with multiple Nintendo Switch models, including the original Switch, Switch 2, Switch OLED, and Switch Lite.
• The Hall Effect joysticks are designed to prevent drift, offering a more reliable gaming experience over time.
• The mecha-tactile triggers provide a lighter feel and shorter travel distance (0.3mm), which can be beneficial for games requiring quick reactions.

Menyelesaikan masalah

• Pengawal Tidak Bersambung: Ensure the controller is charged. For wireless connection, verify the Switch console is in 'Change Grip/Order' mode and you are pressing the SYNC button on the controller. For wired, ensure it's securely attached to the console.
• Bateri Rendah: If the channel light flashes, charge the controller immediately.
• Drift Kayu Ria: Perform a joystick calibration through the Switch System Settings as described in the 'Calibration Rocker' section.
• Accidental Inputs/Settings Changes: If you experience unintended inputs or settings changes, activate the 'Factory Setting "Lock Mode"' to prevent further issues.

Waranti dan Sokongan

Please follow the instructions for use strictly. If you encounter any problems during use, you can contact us for consultation and solution. Our email is: service@nyxigaming.com. We will handle your inquiry within 24 hours.

Langkah-langkah Keselamatan

• Jangan dedahkan produk kepada cecair.
• Jangan buka produk.
• Elakkan daripada menjatuhkan produk.
• Avoid exposing the product to extremely high or low temperatures.

The symbol indicates that the product should not be disposed of with household waste but should be brought to an appropriate collection point for recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.