ASMAX T30 Mini Electric Air Pump User Manual

1. Pengenalan

The ASMAX T30 Mini Electric Air Pump is a versatile and portable 4-in-1 device designed for inflating tires (road, MTB, motorcycle), sports balls, and other inflatables. It features a compact, lightweight design, a powerful 120PSI output, fast charging, and a dual LED display with auto shut-off for precise and safe inflation. This manual provides essential information for the proper use and maintenance of your ASMAX T30.

2. Kandungan Pakej

Sila semak pakej untuk memastikan semua item ada:

• ASMAX T30 Mini Air Pump
• 12cm Threaded Air Hose (1/4" NPT)
• Kabel Pengecas USB-C
• Carry Pouch (Storage Bag)
• Lanyard
• Ball Inflation Needle
• Presta Valve Adapter (with Heat-Resistant Shields)
• Schrader Valve Adapter (with Heat-Resistant Shields)
• Dunlop Valve Adapter
• Manual Pengguna

Illustration of all included components in the ASMAX T30 package.

3. Spesifikasi

Berakhirview of the ASMAX T30's main features and capabilities.

4. Persediaan

4.1 Pengecasan Awal

Before first use, fully charge the ASMAX T30 Mini Electric Air Pump. Connect the provided USB-C charging cable to the pump and a suitable power source (e.g., USB wall adapter, computer USB port). The battery indicator on the LED display will show charging status.

• Cas peranti selama sekurang-kurangnya 1.5 jam sebelum digunakan.
• A full charge is indicated by the battery icon on the display.

Connect the USB-C cable to charge the pump.

5. Arahan Operasi

5.1 Power & Settings

• HIDUP/MATIKAN: Press and hold the power button (labeled 'O' or center button) for 3 seconds.
• Start/Pause Inflation: Tekan sebentar butang kuasa.
• Tetapkan semula ke Tetapan Kilang: Press and hold both the "+" and "-" buttons simultaneously for 2 seconds when the display shows "0.0" (no valve connected). The screen will light up, then reset.
• Tetapkan Tekanan Sasaran: Short press the "+" or "-" buttons to adjust the preset pressure value.
• Quick Adjust Target Pressure: Long press the "+" or "-" buttons for faster adjustment of the target pressure.

Quick guide for basic operation and settings.

5.2 Inflation Guide - Presta Valve (Without Air Hose)

1. Screw the Presta valve adapter (red, with small sealing hole facing outward) onto the pump nozzle.
2. Unscrew the cap on the Presta valve of the tire.
3. Loosen the valve nut by turning it counterclockwise until it reaches the top.
4. Briefly press the valve with your finger to ensure air can flow out.
5. Set the desired pressure on the pump.
6. Insert the adapter into the valve vertically and press firmly to begin inflation.

Note: If the tire already contains air pressure, start the pump first, then insert the adapter.

Warning: Improper insertion may cause air leakage, blockage, or pump failure.

Proper vertical insertion of the pump with Presta valve adapter.

5.3 Inflation Guide - Presta Valve (With Air Hose)

1. Attach the 12cm threaded air hose to the pump.
2. Screw the Presta valve adapter onto the hose connector.
3. Make sure the valve nut on the tire's Presta valve is fully loosened (at the top).
4. Insert the hose connector vertically and press firmly onto the valve.
5. Set the desired pressure on the pump, then start inflating.

Using the air hose with a Presta valve for inflation.

5.4 Inflation Guide - Schrader Valve (With Air Hose)

1. Attach the 12cm threaded air hose to the pump.
2. Unscrew the valve cap on the tire, then screw the hose connector tightly onto the Schrader valve.
3. Set the desired pressure on the pump, then begin inflating.

Note: If the tire already has pressure, start the pump first before connecting the hose.

Connecting the air hose to a Schrader valve.

5.5 Inflation Guide - Dunlop Valve / Ball Needle

For Dunlop valves or sports balls, use the appropriate adapter:

1. Attach the 12cm threaded air hose to the pump.
2. Screw the Dunlop valve adapter or the ball inflation needle onto the hose connector.
3. Connect the adapter firmly to the item to be inflated.
4. Set the desired pressure on the pump, then begin inflating.

The ASMAX T30 supports various valve types with included adapters.

5.6 Operasi Lampu LED

The ASMAX T30 includes an integrated LED light for use in low-light conditions.

• Turn ON/OFF LED Light: Double press the "+" button.

Double press the '+' button to activate the LED light.

6. Penyelenggaraan

• Pembersihan: Wipe the pump with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storan: Store the pump and its accessories in the provided carry pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
• Penjagaan Bateri: To prolong battery life, charge the pump regularly, even if not in frequent use. Avoid fully discharging the battery for extended periods.
• Penjagaan Penyesuai: Keep all adapters clean and free from debris to ensure a proper seal during inflation.

7. Penyelesaian masalah

Error Code E01 (Overheating)

Gejala: "E01" appears on the display, and the pump stops operating.

Penyelesaian: This indicates the pump has overheated. Allow the pump to rest for 10 minutes before using it again. Avoid prolonged continuous operation, especially in hot environments.

Error Code E08 (No-Load Detected)

Gejala: "E08" appears on the display, and the pump does not inflate or shows zero pressure.

Penyelesaian: This means the pressure sensor is reporting zero pressure, possibly due to improper connection or the item already being fully inflated. Check if the hose/adapter is properly connected to the valve. Ensure full insertion to avoid air leakage. If the item is already fully inflated, the pump will not operate.

Pam tidak dihidupkan

Penyelesaian: Ensure the battery is charged. Press and hold the power button for 3 seconds to turn it on.

Slow inflation or air leakage

Penyelesaian: Check all connections for tightness. Ensure the valve adapter is fully inserted and securely screwed onto the valve stem. For Presta valves, ensure the valve nut is fully loosened.

8. Nota Keselamatan

• Check Recommended Tire Pressure: Always verify the correct pressure for your tires or inflatables before use to avoid risks of over- or under-inflation. Refer to the manufacturer's recommendations for your specific item.
• Caution: High Temperature: After extended use, the hose connection and adapters may become hot. Avoid prolonged contact to prevent burns. Allow the pump to cool down if it becomes excessively hot.
• Persekitaran Operasi: The pump is designed to operate in temperatures between -10 to 45 Celsius. Avoid using it outside this range.
• Kanak-kanak: Jauhkan peranti daripada capaian kanak-kanak.
• Pendedahan Air: Do not expose the pump to water or rain.

The ASMAX T30 is designed for use in various temperatures (-10°C to 45°C).

9. Petua Pengguna

• Pre-set Pressure: Utilize the pre-set pressure feature to avoid over-inflation. The pump will automatically stop once the target PSI is reached.
• Air Hose for TPU Tubes: When inflating tires with TPU inner tubes, it is recommended to use the extension air hose. This helps protect the valve and prevents overheating of the pump directly against the tube.
• Check Valve Connection: Always ensure a firm and vertical connection of the adapter or hose to the valve stem to prevent air leakage and ensure accurate pressure readings.
• mudah alih: The compact size and light weight (0.27lb) make it ideal for carrying in a jersey pocket, saddlebag, or backpack for on-the-go inflation.

The ASMAX T30's compact design makes it easy to carry.

10. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or visit the official ASMAX webtapak. Simpan resit pembelian anda sebagai bukti pembelian.