1. Pengenalan
The Haozee Tuya Zigbee Solar Rain Sensor is an advanced smart device designed to detect rainfall and water leaks, integrating seamlessly with your smart home system via Tuya Smart (Zigbee). This sensor provides real-time environmental monitoring, enabling automated responses such as closing windows or triggering alerts, enhancing convenience and protection for your home.
Figure 1: Haozee Tuya Zigbee Solar Rain Sensor
2. Maklumat Keselamatan
- Baca semua arahan dengan teliti sebelum pemasangan dan penggunaan.
- Jangan cuba membuka atau membaiki peranti ini sendiri. Ini boleh membatalkan jaminan dan menyebabkan kerosakan.
- Keep the device away from extreme heat sources or open flames.
- Ensure proper installation to prevent the device from falling, especially when mounted outdoors.
- Buang bateri mengikut peraturan tempatan.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej anda:
- Solar Rain/Leak Sensor: 1 Piece
- User Manual (English & Chinese): 1 Copy
- Ni-MH Battery: 1 Piece (Pre-installed)
- Screw Pack: 1 Set
- 3M Double-Sided Tape: 1 Piece
4. Ciri-ciri Produk
- Berkuasa Suria: Equipped with a built-in solar panel for continuous charging of the Ni-MH battery, offering long-term, worry-free operation.
- Accurate Rain Detection: Utilizes a patented PCB contact sensor for reliable detection of rainwater.
- IP65 Kalis Cuaca: Designed for outdoor use, resistant to dust and water jets, operating in temperatures from -20°C to +70°C.
- Integrasi Rumah Pintar: Compatible with Tuya Smart platforms via Zigbee protocol, allowing for advanced automation and linkage with other smart devices.
- Pelbagai fungsi: Detects both outdoor rain and indoor water leaks (when placed upside down).
- Pemasangan Fleksibel: Can be mounted using screws or 3M adhesive tape on various surfaces.
- Penggunaan Kuasa Rendah: Rated power consumption of 0.0010W, with a maximum of 0.0027W.
- Penunjuk LED: Features an orange LED for status indication.
- Tetapkan Semula Fungsi: Includes a reset button for factory restore.
5. Spesifikasi
| Atribut | Penerangan |
|---|---|
| Nama Jenama | haozee |
| Model | Solar Rain Sensor (Nickel Metal Hydride Waterproof) |
| asal usul | Tanah Besar China |
| Material/Color of Shell | ABS+PC/Black |
| Juruterbang Lamp | 1 x Orange LED |
| Use Ambient Temperature | -20°C hingga +70°C |
| Tahap Perlindungan | IP65 |
| Platform Sokongan | Tuya |
| Protokol | Zigbee |
| Bahan Kimia yang Mementingkan Tinggi | tiada |
| Saiz Produk (mm) | Bottom length * bottom width * slope height = 80mm * 80mm * 26mm; Bottom length * bottom width * inclined low height = 80mm * 80mm * 20mm |
| Type/Weight | Sensor/Gross weight = 80g (with battery); 58g (without battery) |
| Capture Sensor IC | PCB contact |
| Cip Kawalan Utama | TLSR8258 |
| Penggunaan Kuasa Ternilai | 0.0010W |
| Penggunaan Kuasa Maksimum | 0.0027W |
| Mod Bekalan Kuasa | 1 section 1.3V 1200mAh Nickel Metal Hydride Battery (Ni-MH) |
| Exploration Cycle | Standby detection is always available. Short press reset key can actively report once. |
| Reset / Upgrade Method | Press reset pin for 5 seconds to restore factory settings. |
| Pensijilan Antarabangsa | RoSH, CFred |
Figure 2: Product Specifications Table
6. Persediaan dan Pemasangan
6.1 Pemasangan Fizikal
The sensor can be installed in various outdoor locations. Choose a spot where it can receive direct sunlight for optimal solar charging and where it can accurately detect rain. Ensure the sensor is placed in a location that allows rainwater to accumulate on its detection surface.
- On Outer Glass Window: Use the provided 3M double-sided tape to stick the sensor flat onto the outer glass window.
- On Exterior Wall: Use the provided screw pack to securely install the sensor on an exterior wall.
- On Windowsill/Patio/Balcony: The sensor can also be placed flat on a windowsill, patio, or balcony surface.
Figure 3: Various Installation Methods
6.2 Pairing with Tuya Smart App (Zigbee Gateway Required)
This sensor requires a Zigbee gateway (not included) to connect to the Tuya Smart ecosystem. Follow these steps to pair your sensor:
- Ensure your Zigbee gateway is powered on and connected to the Tuya Smart app.
- Open the Tuya Smart app on your smartphone.
- Add a new device and select the Zigbee Rain Sensor (or similar category).
- Follow the in-app instructions to put the sensor into pairing mode. This usually involves pressing the reset button on the sensor for a short period (e.g., 5 seconds) until the orange LED indicator blinks.
- Once detected, confirm the device in the app and assign it to a room or group.
Figure 4: Tuya Smart App Interface with Rain Alarm
7. Arahan Operasi
7.1 Rain Detection
When rainwater accumulates on the sensor's PCB contact surface, it will detect the presence of rain. The sensor actively reports its status every 60 seconds. This information is sent to your Zigbee gateway and then to the Tuya Smart app.
- Makluman masa nyata: Configure the Tuya Smart app to send push notifications to your phone when rain is detected.
- Automated Actions: Link the rain sensor with other smart devices through the Tuya app to create automation scenarios. For example:
- Automatically close smart windows or curtains when rain starts.
- Retract outdoor awnings or close patio blinds.
- Trigger a smart lock to remind you to take an umbrella when leaving home.
Figure 5: Rain Detection and Window Automation
Figure 6: Smart Automation with Window Pushers
Figure 7: Advanced Smart Home Linkage
7.2 Leak Detection (Indoor Use)
The sensor can also be used indoors to detect water leaks. To use it for leak detection, place the sensor upside down in areas prone to leaks, such as basements, laundry rooms, or under sinks. When water comes into contact with the sensor's surface, it will trigger an alert in the Tuya Smart app, similar to rain detection.
Figure 8: App Interface for Detection Status
8. Penyelenggaraan
8.1 Power Management (Solar Charging)
The sensor is powered by a pre-installed 1.3V 1200mAh Ni-MH battery, which is continuously charged by the integrated solar panel. For optimal performance and battery life:
- Ensure the solar panel receives direct sunlight for several hours daily.
- If the battery level is low (indicated by the app or sensor behavior), place the sensor in direct sunlight for 1-2 days to fully recharge.
- The battery is designed for long-term use and typically does not require replacement for over a year under normal conditions.
Figure 9: Solar Charging for Lifetime Worry-Free Operation
8.2 Pembersihan
Bersihkan panel solar dan permukaan pengesan hujan secara berkala dengan kain lembut danamp cloth to remove dust, dirt, or debris that might obstruct sunlight or interfere with rain detection. Do not use harsh chemicals or abrasive materials.
9. Penyelesaian masalah
- Sensor not detecting rain/leaks:
- Check if the detection surface is clean and free of obstructions.
- Ensure the sensor is placed correctly for rain accumulation (outdoor) or water contact (indoor leak detection).
- Verify the battery level in the Tuya Smart app. Recharge if necessary by exposing to direct sunlight.
- Sensor not connecting to Tuya Smart app:
- Ensure your Zigbee gateway is online and functioning correctly.
- Bring the sensor closer to the Zigbee gateway during pairing.
- Try resetting the sensor by pressing the reset pin for 5 seconds to restore factory settings, then attempt pairing again.
- Check your Wi-Fi network and internet connection.
- Automations not triggering:
- Verify that the automation rules are correctly set up in the Tuya Smart app.
- Ensure all linked devices (e.g., smart windows, alarms) are online and properly connected.
- Check the sensor's status in the app to confirm it's reporting detection events.
10. Petua Pengguna
- Zigbee Home Automation (ZHA) Compatibility: While designed for Tuya, some users report success integrating Zigbee devices with other platforms like Home Assistant via ZHA. Ensure your Zigbee coordinator supports the device's specific Zigbee profile untuk hasil terbaik.
- Pengecasan Suria Optimum: For consistent performance, mount the sensor in a location that receives at least 4-6 hours of direct sunlight daily.
- Testing Automation: After setting up automation rules, perform a manual test (e.g., by wetting the sensor) to ensure all linked devices respond as expected.
11. Waranti dan Sokongan
For warranty information and technical support, please refer to the official haozee webtapak atau hubungi peruncit anda. Simpan resit pembelian anda sebagai bukti pembelian.
