1. Pengenalan
Thank you for choosing the MOBAPAD Huben 2 Mechanical Bluetooth Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller. Please read this manual thoroughly before use to ensure optimal performance and safety.
2. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej anda:
- 1 x Mobapad Huben 2 Mechanical Controller
- 1 x 2M Charging Cable (Type-C)
- 1 x Mobapad Dongle
- 1 x PU Carrying Case
- 1 x Manual Pengguna (dokumen ini)
- 1 x Replaceable Cross D-pad
3. Produk Lebihview
Biasakan diri anda dengan susun atur dan fungsi pengawal:
3.1. Button Layout and Configuration
The controller features a standard Xbox-style button configuration. Refer to the diagram below for a detailed overview of all buttons and ports.
4. Persediaan dan Sambungan
4.1. Operasi Asas
- Hidupkan kuasa: Slide the mode switch to the corresponding platform position and briefly press the HOME button.
- Matikan: Slide the mode switch to the OFF position.
- Bersedia: If idle for 10 minutes while connected, the controller will automatically power off.
- Bangun: Briefly press the HOME button (Switch only).
- Bateri Rendah: The LOGO light will flash rapidly when the battery is below 15%.
- mengecas:
- When powered off, the LOGO light is solid red and turns off when fully charged.
- When powered on, the LOGO light flashes twice quickly, then returns to its current lighting effect.
4.2. Connection Status Indicators
| Status | Cahaya LOGO | Penerangan |
|---|---|---|
| Berjaya Bersambung | Cahaya Pepejal | The device has been successfully connected. |
| Berpasangan | Berkelip Pantas | The controller or dongle is in pairing mode, ready for connection. |
| Sambung semula | Berkelip Perlahan | Automatically reconnects to the last successfully connected device. |
4.3. Platform Compatibility and Connection Methods
| Kedudukan Gear | Platform Operasi | Kaedah Sambungan |
|---|---|---|
| PC (Dongle) | PC | Dongle |
| PC (Wired) | PC | berwayar |
| Android/iOS | Android/iOS (Native game controller support) | Bluetooth |
| NS (Bluetooth) | Nintendo Switch | Bluetooth |
| NS (Wired) | Nintendo Switch | berwayar |
4.4. 2.4G Connection to PC (using Dongle)
- Switch the mode to the "PC (Dongle)" position and insert the dongle into the computer's USB port.
- Briefly press the "HOME" button on the controller to power on. The LOGO light will flash slowly, indicating it is attempting to reconnect (the dongle is pre-paired with the controller from the factory).
- When the LOGO light on the controller and the indicator light on the dongle stay solid, the connection is successful.
- For future use, ensure the mode is set to "PC (Dongle)", and briefly press the "HOME" button on the controller to reconnect.
Re-pairing The Dongle And Controller
- Press the pairing button on the dongle. The dongle's light will flash rapidly, indicating it is in pairing mode.
- Briefly press the "HOME" button on the controller to power on, then press and hold the "PAIRING" button for three seconds. The LOGO light will flash rapidly, indicating the controller is in pairing mode.
4.5. Wired Connection to PC
- Set the mode switch to the "PC (Wired)" position.
- Use the provided Type-C cable to connect the controller to the computer's USB port.
4.6. Android/iOS Device Connection (Bluetooth)
- While the controller is powered off, slide the mode switch to the "Android/iOS" position. Briefly press the "HOME" button to power on, then press and hold the "PAIRING" button for 3 seconds. The LOGO light will flash rapidly, indicating it is in pairing mode.
- On your phone, go to the Bluetooth settings and find the device named "Xbox Wireless Controller". Tap to connect.
- Once connected, your phone will display "Connected", and the LOGO light on the controller will stay solid.
- For future use, simply press the "HOME" button to reconnect to your phone.
4.7. Nintendo Switch Device Connection (Bluetooth)
- On the Switch home screen, tap the "Controllers" icon and select "Change Grip/Order".
- While the controller is powered off, slide the mode switch to the "NS (Bluetooth)" position. Briefly press the "HOME" button to power on, then press and hold the "PAIRING" button for 3 seconds. The LOGO light will flash rapidly, indicating it is in pairing mode.
- Once the LOGO light stays solid, press the "HOME" button to return to the home screen.
Switch Reconnect And Wake Up
After a successful connection, if the Switch enters sleep mode, press the "HOME" button on the controller (with the mode switch in the "NS (Bluetooth)" position) to reconnect and wake up the console.
4.8. Nintendo Switch Wired Connection
Before using a wired connection, ensure the controller is powered on or in sleep mode, and enable the Pro Controller's wired connection in the Switch system settings.
- While the controller is powered off, slide the mode switch to the "NS (Wired)" position, and use a Type-C cable to connect the controller to the Switch dock.
- The LOGO light on the controller will stay solid, indicating a successful connection.
5. Arahan Operasi
5.1. Vibration Level Adjustment
The controller supports adjustable vibration levels. Use the designated buttons or software configuration to increase or decrease the vibration intensity.
- Atas: Increase vibration level.
- ke bawah: Decrease vibration level.
The controller will provide vibration feedback at the current intensity.
5.2. Fungsi Turbo
The Turbo function allows for rapid, repeated input of a button press. Mappable buttons for Turbo include: A, B, X, Y, LB, LT, RB, RT, D-pad Up, Down, Left, Right.
| Mod | Pengaktifan | Penerangan |
|---|---|---|
| Turbo Manual | Single-Key + Function Button | After the first setup, hold down the function button to activate turbo; release to stop. |
| Auto Turbo | Single-Key + Function Button (second setup) | After the second setup, short press the function button to initiate automatic turbo; short press again to pause. |
| Lumpuhkan Turbo | Single-Key + Function Button (third setup) | After the third setup, the turbo function for that specific button will be disabled. |
Turbo Mode Switching LED Indicators
- Kelajuan Rendah: LOGO light flashes once.
- Kelajuan Sederhana: LOGO light flashes twice.
- Kelajuan Tinggi: LOGO light flashes three times.
5.3. Fungsi Makro
The controller features four programmable back buttons (M1, M2, M3, M4) for custom macros. Assignable buttons for macros include: A, B, X, Y, LB, LT, RB, RT, L3, R3, and joysticks (joysticks only support eight directions, no analog input).
- Recording a Macro: Press and hold the "MACRO" button for 3 seconds until the LOGO light turns solid purple. Perform the desired actions, then press an M1/M2/M3/M4 button to save the macro to that button. The LOGO light will return to its default state upon successful recording.
- Membersihkan Makro: Long press the "MACRO" button for 3 seconds (LOGO light turns solid purple, controller vibrates). Then press the specific M1/M2/M3/M4 button to clear its recorded macro.
- Gelung Makro: Press "MACRO" + M1/M2/M3/M4 to enable the macro loop. Press "MACRO" + M1/M2/M3/M4 again to disable it. Pressing any button except the joystick will also terminate the macro loop.
6. Spesifikasi
| Ciri | Penerangan |
|---|---|
| produk | Mobapad Huben 2 Mechanical Controller |
| Bersambung | Bluetooth, Wired, 2.4G dongle |
| Platform yang Serasi | PC, Steam, Switch, Android, iOS |
| Motor | ALPS HD linear motors |
| Kayu bedik | Capacitive joysticks (ALPS Sensor Module) |
| Joysticks Polling Rate | Wired/Wireless 1000Hz |
| Pencetus | Dual Hall Linear trigger / Omron Microswitch trigger |
| Butang Muka | Omron Mechanical Buttons |
| Shoulder Buttons | Suis taktil |
| D-pad | Omron Mechanical Buttons (Replaceable) |
| Butang Belakang | Four (Customizable Macros) |
| Fungsi Turbo | ya |
| Hayat Bateri | 1000mAh (approx. 15 hours of play time) |
| Konfigurasi Butang | XBOX Layout |
| Saiz | 155mm x 104mm x 65mm |
| Berat badan | 285g |
| Penjejakan Pergerakan | Advanced 6-Axis Motion Tracking |
| Kepekaan Joystick | 4,096-step resolution (12-bit ADC chip) |
| Trigger Key Travel | 0.7mm (Omron mechanical buttons) |
| Trigger Actuation Force | 120gf (Feather-light press) |
| Hidup Butang | 10 juta akhbar |
| Konfigurasi Perisian | Yes (PC/Phone App) |
7. Penyelenggaraan
- Pembersihan: Clean the controller with a soft, dry cloth. Do not use chemicals such as gasoline or thinner for cleaning.
- Storan: Store the product in a dry, dust-free environment away from direct sunlight and high temperatures.
- Penjagaan Am: Avoid impacting or dropping the product. Do not forcefully bend or pull the cables.
8. Penyelesaian masalah
- Pengawal tidak dihidupkan: Ensure the battery is charged. Connect the controller to a power source using the Type-C cable.
- Unable to connect via 2.4G dongle: Ensure the mode switch is in the correct "PC (Dongle)" position. If the dongle and controller are not paired, follow the re-pairing instructions in Section 4.4.
- Isu sambungan Bluetooth: Ensure the mode switch is in the correct Bluetooth position (Android/iOS or NS). Make sure the controller is in pairing mode (rapidly flashing LOGO light) and visible in your device's Bluetooth settings.
- Buttons or joysticks unresponsive: Try resetting the controller using the reset hole (refer to Figure 3.3). Ensure no debris is obstructing the buttons or joysticks.
- Getaran tidak berfungsi: Check the vibration level settings (Section 5.1) and ensure it's not set to off or minimum.
- Macro not recording/playing back: Ensure you are following the macro recording steps correctly (Section 5.3). Check if the macro has been cleared accidentally.
9. Petua Pengguna
- Penyesuaian: Utilize the PC/Phone App for rich customization options, including joystick adjustment, macro programming, and vibration adjustment.
- D-pad Replacement: The D-pad is replaceable. Experiment with the included cross D-pad to find your preferred feel for different games.
- Permainan Latensi Rendah: For competitive gaming, consider using the wired connection option for the lowest possible latency.
10. Langkah-langkah Keselamatan
- Contains small parts. Keep out of reach of children under 3 years old. If accidentally swallowed or inhaled, seek immediate medical attention.
- Do not use the product near fire or heat sources.
- Do not expose the product to direct sunlight or high-temperature environments.
- Jangan letakkan produk dalam persekitaran yang lembap atau berdebu.
- Jangan hentam atau jatuhkan produk.
- Do not directly touch the USB port, as it may cause malfunction.
- Do not forcefully bend or pull the cables.
- Jangan buka, baiki atau ubah suai produk itu sendiri.
- Do not use the product for purposes other than its intended design. We are not responsible for accidents or damages caused by improper use.
- Do not look directly at the light beam, as it may harm your eyes.
11. Waranti dan Sokongan
MOBAPAD offers a one-year warranty for this controller. If you encounter any concerns or issues with your Mobapad controller, please feel free to reach out to us. We are committed to addressing your needs and ensuring your satisfaction.
For further assistance, you may also refer to the official user manual PDF available online: View Manual Pengguna (PDF)
- e-mel: service@mobapad.com
- Alamat: Daerah Longhua, Shenzhen
- Sumber Dalam Talian:
- Download Mobapad APP
- Mobapad Facebook
- Mobapad Subreddit
