DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4

DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4 Gate Door Remote Control

Manual Arahan Pengguna

1. Pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4 wireless remote control. This device is designed for convenient and secure operation of DOORHAN gate and garage door openers, utilizing a 433MHz rolling code frequency for enhanced security.

The remote control is available in 2-button and 4-button configurations and is compatible with all DOORHAN models, including TRANSMITTER 2, TRANSMITTER 4, TRANSMITTER -2 PRO, TRANSMITTER -4 PRO, and Premium RC black 4.

DOORHAN Remote Controls (2-button and 4-button versions) with 433MHz frequency and included battery.

Image: DOORHAN Remote Controls (2-button and 4-button versions) with 433MHz frequency and included battery.

2. Kandungan Pakej

Sila semak pakej dengan teliti untuk memastikan semua item ada:

  • 1x Remote Control (Battery included)
  • 1x English Manual (Quick Guide)
  • 1x Lanyard
  • 1x Backup Battery
  • 1x Blister Box (packaging)
Package contents: Blister box, Instructions (Quick Guide), Remote control, Lanyard, Backup battery.

Image: Package contents including remote, quick guide, lanyard, and backup battery.

3. Spesifikasi

Ciri Spesifikasi
Bilangan Saluran 2 atau 4
Kekerapan 433MHz / 433.92MHz
Programming Type Programming with Receiver
Kod Rolling Code
Julat Kerja 30-150 meter (bergantung pada persekitaran)
Keserasian All DOORHAN models
Pensijilan CE
Dimensi (lebih kurang) 54mm x 33mm x 10mm
Diagram showing dimensions and specifications of the DOORHAN remote control.

Image: Dimensions and key specifications of the remote control.

4. Setup (Programming)

To program your new DOORHAN remote control, you will need to pair it with your gate or garage door opener's receiver. The programming procedure is similar to that of original DOORHAN Transmitter 4 remotes. Always refer to your receiver's user manual for specific instructions, as procedures may vary slightly between models. For a typical DOORHAN Garage Control Panel, follow these steps:

  1. Press and release the button 'R' on the receiver.
  2. The left side of the display panel on the receiver will show '0' and then disappear immediately.
  3. Press any button on your new remote control twice. Coding is now completed.
  4. Press the transmitter button again to test operation. The gate or garage door should respond.

Nota:

  • To remove a single transmitter's code or all transmitter codes from the receiver memory, please refer to your receiver manual.
  • Ensure you are within range of the receiver during the programming process.
Image displaying both 2-button and 4-button DOORHAN remote controls, highlighting compatibility with TRANSMITTER-2 PRO and TRANSMITTER4 models.

Image: DOORHAN remote controls, compatible with various models.

5. Arahan Operasi

Once programmed, operating your DOORHAN remote control is straightforward:

  • Pengaktifan: Press the desired button on the remote control to activate your gate or garage door opener.
  • Julat: The remote operates within a range of 30-150 meters, depending on environmental conditions and obstacles.
  • Berbilang Peranti: If you have a 4-button remote and multiple DOORHAN devices (e.g., two garage doors, a gate, and an alarm), you can program each button to control a different device.
jarak dekat view of the 4-button DOORHAN remote control.

Image: Close-up of the 4-button remote control.

6. Penyelenggaraan

Penggantian Bateri

The remote control uses a standard coin cell battery (typically CR2032). When the remote's range decreases significantly or it stops responding, it's likely time to replace the battery.

  1. Buka alat kawalan jauh dengan berhati-hati casing. Ini mungkin memerlukan pemutar skru kecil atau alat mengungkit.
  2. Remove the old battery, noting its orientation (positive (+) side up).
  3. Masukkan bateri CR2032 baharu dengan bahagian positif (+) menghadap ke atas.
  4. Tutup alat kawalan jauh casing dengan selamat.

Penjagaan Am

  • Keep the remote control dry and away from extreme temperatures.
  • Elakkan daripada menjatuhkan alat kawalan jauh atau mendedahkannya kepada hentaman yang kuat.
  • Clean the remote with a soft, dry cloth if necessary. Do not use harsh chemicals.

7. Penyelesaian masalah

  • Alat kawalan jauh tidak berfungsi selepas pengaturcaraan:
    • Ensure the remote's battery is fresh and correctly installed.
    • Repeat the programming steps carefully, ensuring the receiver acknowledges the remote.
    • Check your receiver's manual for any specific programming nuances or error codes.
  • Julat operasi yang dikurangkan:
    • Gantikan bateri kawalan jauh.
    • Check for any new sources of radio interference near your gate/garage door opener.
    • Ensure there are no new large metallic objects obstructing the signal path.
  • Kerja jarak jauh berfungsi secara berselang-seli:
    • This often indicates a low battery. Replace it.
    • Check for loose connections inside the remote if you have opened it previously.

8. Petua Pengguna

Tiada petua pengguna khusus tersedia daripada pelanggan semulaviews or Q&A for this product. However, general tips for remote controls include:

  • Keep a spare battery on hand for quick replacement.
  • Store the remote in a consistent, easily accessible location (e.g., car visor clip, key chain) to avoid misplacing it.
  • If you have multiple remotes, label them to easily identify which controls which device.

9. Waranti dan Sokongan

For any issues or support inquiries regarding your DOORHAN remote control, please contact the seller or manufacturer directly. Keep your purchase records handy as they may be required for warranty claims or technical assistance.

This product is manufactured by Shenzhen Sarik Technology Co.,Ltd.

Dokumen Berkaitan - TRANSMITTER - 2 PRO / TRANSMITTER4

Praview DOORHAN TRANSMITTER 4 Remote Control Programming Manual
Step-by-step instructions for programming the DOORHAN TRANSMITTER 4 remote control for barrier and gate systems. This guide ensures easy setup and operation.
Praview DoorHan PCB-SL Control Board Programming and Electrical Connections Guide
Comprehensive guide to the DoorHan PCB-SL control board, covering electrical connections, DIP switch settings, transmitter programming, and mechanical regulator adjustments for gate automation systems.
Praview DoorHan WiFi Accessories: Smart Control for Your Garage Doors
Explore the DoorHan range of WiFi accessories, including the Magic WiFi Plug, External WiFi RE Receiver, and External WiFi CONTROL. Enhance your garage door operation with smart, remote control capabilities via the Tuya app.
Praview DoorHan PCB-SW Control Board Programming Instructions
This document provides detailed instructions for programming the DoorHan PCB-SW control board, covering electrical connections, drive programming, and remote control setup for gate automation systems.
Praview DoorHan SHAFT-50 Operator Installation Manual
This manual provides detailed instructions for the installation, adjustment, and operation of the DoorHan SHAFT-50 automatic operator for industrial and commercial doors and gates.
Praview DoorHan GSM-MODULE 3.0 User Manual and Technical Guide
Comprehensive user manual for the DoorHan GSM-MODULE 3.0, covering general information, connection diagrams, technical specifications, and programming via PC and SMS commands. Includes setup instructions and troubleshooting tips.