1. Pengenalan
Thank you for choosing the DOMRAEM ESP32 WLED Digital LED Controller. This device is designed to provide versatile and dynamic control over addressable LED strips, offering a wide range of lighting effects and smart home integration capabilities. This manual will guide you through the setup, operation, and maintenance of your controller to ensure optimal performance and enjoyment.
Video: Demonstration of various dynamic lighting effects controlled by the WLED controller.
2. Maklumat Keselamatan
- Pastikan input voltage matches the specifications of the controller and your LED strips (DC 5V-24V).
- Jangan melebihi jumlah arus keluaran maksimum 16A atau 12A setiap saluran.
- The USB-C interface supports 5V input with a maximum current of 5A. Do not exceed these limits.
- Disconnect power before making any electrical connections or disconnections.
- Jauhkan peranti daripada air, kelembapan dan suhu yang melampau.
- Produk ini bertujuan untuk kegunaan dalaman sahaja.
- If you are unsure about any wiring or electrical connections, consult a qualified electrician.
3. Kandungan Pakej
- 1 x DOMRAEM ESP32 WLED Digital LED Controller (DOM-WLE-A)
Note: LED strips, power supply, and remote control are sold separately.
4. Spesifikasi
Imej: Parameter dan spesifikasi produk terperinci.
| Ciri | Penerangan |
|---|---|
| Nombor Model | DOM-WLE-A |
| Nama Produk | ESP32 WLED Digital LED Strip Controller |
| Nama Jenama | DOMRAEM |
| Input Voltage | DC 5V-24V (USB-C supports 5V/5A max) |
| Output Arus/Saluran | Maks 12A |
| Jumlah Arus Keluaran | Maks 16A |
| Maks. Kuasa Beban | 384W |
| Kuantiti IC | 800 Maks |
| Lampu yang berkenaan | WS2811, WS2812, WS2812B, WS2813, SK6812, TM1814, WS2814, WS2805 Strip Light |
| Mod Sambungan | WIFI |
| Kaedah Terkawal | WLED WIFI APP / WLED remote control |
| Berfungsi Dengan | MQTT, Home Assistant, Alexa |
| Saiz Produk | 109.5mm x 46mm x 17.5mm |
| bahan | ABS plastic (Fireproof PC) |
| Suhu Operasi | -20°C ~ 45°C |
| Waranti | 2 tahun |
| Pensijilan | CE, EMC, FCC, LVD, ROHS |
5. Persediaan
5.1. Pilihan Bekalan Kuasa
Pengawal menawarkan tiga kaedah untuk input kuasa:
- Soket DC 5.5x2.1mm: Standard DC barrel jack for power adapters.
- V+, Antara Muka Kuasa V-: Screw terminals for direct wire connection from a power supply.
- Bekalan Kuasa USB-C: A convenient USB-C port for 5V input (max 5A).
Image: Illustration of the three power input options: DC socket, V+/V- terminals, and USB-C port.
5.2. Arahan Pendawaian
The controller features quick connect ports for easy wiring. Follow these steps:
- Buka penyambung ke atas.
- Insert the wire (suggested 0.34-4mm² / 22-12AWG) into the appropriate terminal.
- Press down on the connector to secure the wire.
For connecting your LED strip:
- The group of 'D' for GPIO16 is the default data output. Use this group first for your LED strip's data line.
- The other group of 'D' is GPIO2, which can be used after configuration on the WLED APP.
- Connect V to VCC (positive power) and G to GND (ground).
Image: Step-by-step guide on using the quick connect port for wiring.
Image: Wiring diagram showing connections for VCC, Data (GPIO16/GPIO2), and GND.
5.3. Muat turun Aplikasi
To control your WLED controller, download the WLED app:
- iOS: Cari untuk "WLED" or "WLED Native" in the App Store.
- Android: Muat turun dari repositori GitHub rasmi: github.com/Aircoookie/WLED-App/releases
Image: Visual guide for downloading the WLED application on iOS and Android.
5.4. App Configuration Steps
Follow these steps to configure your controller with the WLED app:
- Langkah Pertama: Turn on the WLED controller. Open your phone's settings and find the WLED-AP hotspot. Connect to it using the password "wled1234".
- Langkah Kedua: After a successful connection, it will automatically redirect to the WLED page. If not, open a browser and navigate to the WLED page. Click on "WIFI Settings".
- Langkah Ketiga: Click "Scan" to display available Wi-Fi networks.
- Langkah Empat: Select your 2.4GHz Wi-Fi network (5GHz networks are not supported), enter the password, and click "Save".
- Langkah Kelima: Connect your phone and the WLED controller to the same Wi-Fi network.
- Langkah Enam: Selepas sambungan berjaya, buka apl WLED.
- Langkah Ketujuh: Click on "Blank space" to enter the WLED page.
- Langkah Lapan: Enter the WLED page for configuration and control.
Image: Step-by-step visual guide for configuring the WLED controller via the app.
6. Arahan Operasi
6.1. Kawalan Apl WLED
The WLED app provides comprehensive control over your LED strips:
- Pilihan Warna: Pilih daripada 16 juta warna menggunakan roda warna.
- Kesan Dinamik: Access over 100 pre-installed dynamic lighting effects, including Rainbow Gradient, Breathing, Music Sync, and more.
- Kawalan Segmen: Divide your LED strips into independent segments and apply different effects or colors to each.
- Kesan Pencahayaan DIY: Create and save up to 250 user presets for customized lighting scenes.
- Sync Effects: Synchronize lighting effects across multiple LED strips connected to the WLED controller on the same Wi-Fi network.
Image: Screenshot of the WLED app interface for color and effect control.
Image: Displaying the variety of dynamic effects available in the WLED app.
Image: Demonstrating the DIY lighting effect creation and segment control within the app.
Image: Comparison of LED strip effects before and after synchronization via the WLED app.
6.2. Fungsi Butang
The controller features two buttons: Reset and Opt.
- Butang Tetapkan Semula: Menekan butang ini akan meletakkan modul pengawal dalam keadaan dimatikan, menjadikan pengawal WLED tidak boleh digunakan. Releasing the button will power the module back on. This button is useful for powering the controller on and off when it's inconvenient to access the power supply.
- Butang Pilih:
- Tekan pendek: Hidupkan / matikan.
- Tekan lama selama 1 saat: Tukar warna.
- Long press for more than 10 seconds: The WLED device will be reset to factory settings, and the WLED-AP hotspot will be activated. Do not use unless it is an emergency or if the factory settings have been restored.
Image: Diagram illustrating the functions of the Reset and Opt buttons on the controller.
6.3. External Push Switch (GPIO33)
The GPIO33 port can be used to connect an external push switch for additional physical control. This allows for basic functions like power on/off, color adjustment, and mode changes without needing the app.
- Tekan pendek: Hidup/mati
- Tekan lama 1s: Laraskan warna
- Tekan lama 10s: Enter Wi-Fi AP mode, pop-up hotspot "WLED-AP"
Image: Diagram showing how to connect a push switch to the IO33 port for physical control.
6.4. WLED Remote Control
The controller supports WLED remote control for convenient operation. Please note that the remote control is sold separately.
Imej: Selesaiview of the WLED remote control functionality, including preset scenes, sleep mode, and brightness adjustment.
6.5. Integrasi Rumah Pintar
The DOMRAEM WLED controller is compatible with popular smart home platforms, allowing for advanced automation and voice control:
- MQTT: Integrate with MQTT brokers for custom home automation setups.
- Pembantu Rumah: Seamlessly connect with Home Assistant for centralized control.
- Alexa: Use voice commands with Amazon Alexa devices to control your LED lighting.
7. Penyelenggaraan
- Pembersihan: Use a dry, soft cloth to clean the controller. Do not use liquid cleaners or solvents.
- Storan: Simpan pengawal di tempat yang sejuk dan kering apabila tidak digunakan untuk tempoh yang lama.
- Kemas kini Firmware: Periodically check the WLED community or official sources for firmware updates to ensure optimal performance and access to new features.
8. Penyelesaian masalah
| Masalah | Penyelesaian yang Mungkin |
|---|---|
| LED tidak menyala | Check power supply connection and voltage. Ensure LED strip is correctly wired to GPIO16 (Data), VCC, and GND. Verify the LED strip type is supported. |
| Cannot connect to WLED-AP hotspot | Ensure the controller is powered on. Try long-pressing the Opt button for 10 seconds to reset to factory settings and re-enable AP mode. |
| Cannot connect to home Wi-Fi | Ensure your Wi-Fi network is 2.4GHz. Double-check the Wi-Fi password. Move the controller closer to your Wi-Fi router. |
| Incorrect colors or flickering LEDs | Verify the correct LED strip type is selected in the WLED app settings. Check wiring for loose connections. Ensure your power supply is sufficient for the length and density of your LED strip. |
| App not detecting controller | Ensure both your phone and the controller are connected to the same Wi-Fi network. Restart the WLED app. |
9. Petua Pengguna
- Pertimbangan Kuasa: Always ensure your power supply can handle the total current draw of your LED strips. If you are using a long strip or many LEDs, consider injecting power at multiple points along the strip.
- Kestabilan Wi-Fi: For the best experience, ensure your controller is within good range of your 2.4GHz Wi-Fi network. A stable connection is crucial for seamless app control and smart home integration.
- Experiment with Effects: The WLED firmware offers a vast array of effects. Take time to explore them and customize parameters to create unique lighting atmospheres.
- Sokongan Komuniti: The WLED community is very active. If you encounter advanced issues or want to explore more features, online forums and documentation can be a great resource.
10. Waranti dan Sokongan
The DOMRAEM ESP32 WLED Digital LED Controller comes with a Waranti 2 tahun dari tarikh pembelian, meliputi kecacatan pembuatan. Sila simpan bukti pembelian anda untuk tuntutan waranti.
For technical support, troubleshooting assistance, or warranty inquiries, please contact DOMRAEM customer service through the platform where you purchased the product.
