1. Produk Lebihview
The HBM200 HITBOX is a versatile and portable single-phase 220V welding machine designed for various welding applications. It incorporates a full-digital control system to ensure precise control and a stable arc during welding, leading to reduced metal loss and enhanced efficiency. This machine is an excellent choice for both experienced welders and beginners due to its user-friendly design and multi-functionality.
It supports three primary welding functions:
- MIG Function: Suitable for gasless iron welding.
- TIG Function: Designed for Argon gas stainless steel welding (Lift TIG).
- Fungsi ARC: Ideal for no-gas iron welding (MMA).
2. Kandungan Pakej
Selepas membongkar, pastikan semua item berikut ada:
- HBM200 Welding Machine
- Obor MIG
- Bumi Clamp
- Pemegang Elektrod
- Flux Cored Wire (sample spool)
- Berus wayar
- Manual Arahan (dokumen ini)
3. Arahan Persediaan
3.1 Wire Spool Installation (for MIG welding)
- Open the side panel of the welding machine to access the wire feed mechanism.
- Mount the 1KG flux core wire spool onto the spindle, ensuring it rotates freely.
- Thread the wire through the guide tube and into the wire feed rollers.
- Adjust the tension on the wire feed rollers to prevent slippage or crushing of the wire.
- Close the side panel securely.
3.2 Connection Methods for Welding Modes
Refer to the diagram below for proper connection of accessories based on the desired welding mode:
- MIG Tanpa Gas: Connect the MIG torch to the positive (+) terminal and the earth clamp ke terminal negatif (-).
- MMA (ARC): Sambungkan pemegang elektrod ke terminal positif (+) dan penutup bumiamp ke terminal negatif (-).
- Angkat TIG: Connect the TIG torch to the negative (-) terminal and the earth clamp to the positive (+) terminal. (Note: TIG torch and gas regulator are typically sold separately for Lift TIG functionality).
4. Arahan Operasi
4.1 Kawalan Panel Hadapan
Familiarize yourself with the front panel of the HBM200 for effective operation:
- Paparan Digital: Menunjukkan parameter kimpalan semasa.
- Butang Mod Fungsi: Press to cycle through MMA, Gasless MIG, and Lift TIG welding modes. The selected mode will be indicated on the display.
- Current Adjust Knob (MIN/MAX): Rotate to adjust the welding current (Amperage) according to your welding requirements.
- Lampu Pelindung: When this light illuminates, it indicates that the machine has entered a protective state (e.g., overheating, overcurrent) and requires a temporary stop in operation. Allow the machine to cool down or resolve the issue before resuming.
4.2 Langkah Operasi Am
- Ensure the machine is connected to a stable 220V power supply.
- Connect the appropriate welding accessories (MIG torch, electrode holder, earth clamp) as per the desired welding mode (refer to Section 3.2).
- Hidupkan mesin kimpalan.
- Select the desired welding function (MIG, TIG, or ARC) using the Function Mode Button.
- Adjust the welding current using the Current Adjust Knob to match the material thickness and type.
- Begin welding, ensuring proper safety precautions are followed.
- If the protective light illuminates, stop welding immediately and allow the machine to rest.
5. Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your HBM200 welding machine.
- Pembersihan: Periodically clean the machine's exterior with a dry, soft cloth. Ensure ventilation openings are free from dust and debris to prevent overheating.
- Mekanisme Suapan Kawat: Inspect the wire feed rollers and guide tube for wear or blockages. Clean any metal dust or debris that may accumulate.
- Kabel dan Sambungan: Periksa semua kabel kimpalan, lampu suluh, pemegang elektrod dan penutup bumi secara berkalaamp untuk kerosakan, keretakan atau sambungan longgar. Gantikan komponen yang rosak dengan segera.
- Storan: Simpan mesin kimpalan dalam persekitaran yang kering dan bebas habuk apabila tidak digunakan.
6. Penyelesaian masalah
If you encounter issues with your HBM200, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Mesin tidak dihidupkan | No power supply; faulty power cable | Check power connection and outlet; inspect power cable for damage. |
| Protective light is on | Overheating; overcurrent | Stop welding, allow machine to cool down. Ensure proper ventilation. Reduce welding current if continuously triggered. |
| Poor arc stability or no arc | Incorrect current setting; poor earth connection; wrong welding mode selected; wire feed issue (MIG) | Adjust current. Ensure earth clamp has good contact. Verify correct mode. Check wire spool installation and feed. |
| Wire not feeding (MIG) | Wire tangled; feed roller tension incorrect; nozzle blocked | Check wire spool for tangles. Adjust feed roller tension. Clean or replace nozzle. |
7. Spesifikasi
Key technical specifications for the HBM200 HITBOX welding machine:
| Atribut | Nilai |
|---|---|
| Model | HBM200 |
| Bekalan DIY | Elektrik |
| asal usul | Tanah Besar China |
| Bahan / Logam Diproses | Stainless steel, Carbon steel, Iron |
| Nilai Input Voltage | 220 V |
| Wire Melting Type | Pemindahan Litar Pendek |
| Kapasiti Kuasa Beban Maks. | 7.1 KVA |
| Arus Keluaran Dinilai | 120 A |
| Keluaran Voltage | 25 V |
| Kitaran Tugas Dinilai @40°C (MIG) | 60% |
| Kelajuan Suapan Kawat | 15 m/min |
| keadaan | baru |
| Tempat Asal | Shenzhen China |
| Penggunaan | Inverter MIG MAG gasless welding machine |
| Berat (kg) | 8 KG (Note: Product image indicates 4.6kg, please verify actual weight) |
| Waranti | 1 Tahun |
| Ciri | Tanpa gas |
| Power Input AC(V) | 220V jldtage |
| Fungsi | MIG welder, with Lift TIG function, ARC(MMA) / MIg 3 in 1. |
| Bahan Kimpalan | Carbon steel, Iron or stainless steel. |
| Kitaran Tugas Dinilai (%) | 40% di 120 amps |
| Teknologi | IGBT Inverter Welding |
| Julat Arus Kimpalan (A) | 30-120 (MIG) |
| Permohonan | Welding Wire 0.8/1.0mm |
| Kekerapan | 50/60 Hz MIG Welder |
| Pembungkusan | Pembungkusan Kadbod |
| Mata Jualan Utama | MIG TIG MMA 3 IN1 IGBT inverter welder |
8. Petua Pengguna
- Always wear appropriate personal protective equipment (PPE), including a welding helmet, gloves, and protective clothing, when operating the machine.
- Ensure adequate ventilation in your workspace to disperse welding fumes.
- Before starting any welding project, perform a test weld on scrap material to fine-tune your settings and ensure optimal results.
- For Lift TIG welding, remember that an external TIG torch with a gas valve and an Argon gas cylinder with a regulator are required and typically sold separately.
9. Waranti dan Sokongan
The HBM200 HITBOX welding machine comes with a Waranti 1 tahun dari tarikh pembelian. Waranti ini meliputi kecacatan pembuatan dan kerosakan dalam penggunaan biasa. Sila simpan bukti pembelian anda untuk tuntutan waranti.
For technical support, service, or warranty inquiries, please contact your authorized dealer or the manufacturer's customer service department. Refer to the contact information provided with your purchase documentation.
