Antec FLUX SE MESH BTF Mid Tower Case

pengenalan

Thank you for choosing the Antec FLUX SE MESH BTF Mid Tower Case. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new PC case. Please read this manual carefully before beginning your build to ensure proper installation and optimal performance.

Persediaan dan Pemasangan

Before starting, ensure you have all necessary components and tools. Always handle components with care and consider using an anti-static wrist strap.

1. Menyediakan Kes

1. Keluarkan Panel Sisi: Carefully remove the tempered glass side panel and the steel side panel by unscrewing the thumbscrews at the rear of the case.
2. Access Front Panel: The front mesh panel can be detached for easier access to front fan mounts and dust filter cleaning.
3. Kenal pasti Komponen: Familiarize yourself with the internal layout, including motherboard tray, drive bays, and fan mounts.

2. Pemasangan Papan Induk

1. Install the CPU, CPU cooler (if air cooler), and RAM onto your motherboard before placing it in the case.
2. Align the motherboard with the standoffs in the case. The case supports ATX, Micro-ATX, and Mini-ITX motherboards.
3. Selamatkan papan induk dengan skru yang disediakan.

3. Pemasangan Unit Bekalan Kuasa (PSU).

1. Mount your ATX power supply into the PSU shroud area at the bottom rear of the case.
2. Selamatkan PSU dengan skru dari belakang kes itu.

4. Pemasangan Pemacu Storan

• HDD 3.5": Install 3.5" hard drives into the dedicated drive cage located under the PSU shroud.
• SSD 2.5": Mount 2.5" SSDs to the dedicated brackets behind the motherboard tray or on top of the PSU shroud.

5. Pemasangan Kad Grafik (GPU).

1. Tanggalkan penutup slot pengembangan yang diperlukan di bahagian belakang sarung.
2. Insert your graphics card into the PCIe slot on the motherboard and secure it with screws.

6. Pemasangan Kipas dan Radiator

The case offers extensive cooling options:

• Depan: Supports up to 3 x 120mm or 2 x 140mm fans, or radiators up to 360mm.
• Atas: Supports up to 2 x 120mm or 2 x 140mm fans, or radiators up to 280mm.
• belakang: Supports 1 x 120mm fan or 120mm radiator.
• Kafan PSU: Menyokong 2 kipas x 120mm.

7. Pengurusan Kabel

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables for improved airflow and aesthetics.

8. Connecting Front I/O

Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

Mengendalikan Sarung PC Anda

Once all components are installed and cables are connected, replace the side panels. Power on your system using the power button on the front I/O panel. The mesh design ensures optimal airflow for cooling your components.

Port I/O Depan:

• Butang Kuasa: Untuk menghidupkan/mematikan sistem.
• Butang Tetapkan Semula: Untuk memulakan semula sistem.
• Port USB 3.0: Untuk pemindahan data berkelajuan tinggi.
• Port USB 2.0: Untuk peranti USB standard.
• Bicu Audio HD: Untuk fon kepala dan mikrofon.

Penyelenggaraan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat komponen PC anda.

• Penapis Habuk: The case features removable dust filters on the front, top, and bottom (PSU intake). Regularly remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Pembersihan Dalaman: Gunakan udara termampat secara berkala untuk membersihkan habuk daripada komponen dalaman dan kipas. Pastikan sistem dimatikan dan dicabut plagnya sebelum membersihkan.
• Pembersihan Luaran: Lap permukaan luar dengan lembut, damp kain. Elakkan bahan kimia keras yang boleh merosakkan kemasan.

Menyelesaikan masalah

Jika anda menghadapi masalah, pertimbangkan langkah penyelesaian masalah biasa berikut:

• Tiada Kuasa: Ensure the PSU is switched on, all power cables (24-pin, 8-pin CPU, GPU PCIe) are securely connected, and the front panel power switch cable is correctly attached to the motherboard.
• Peminat Tidak Berputar: Check fan connections to the motherboard or fan controller. Ensure sufficient power is supplied.
• Front I/O Not Working: Verify that all front panel cables (USB, Audio) are correctly connected to the motherboard headers.
• Terlalu panas: Ensure proper fan configuration (intake/exhaust), clean dust filters, and check CPU cooler/GPU heatsink mounting.

Spesifikasi

The Antec FLUX SE MESH BTF Mid Tower Case offers robust features for PC builders:

Waranti dan Sokongan

For warranty information and technical support, please refer to the official Antec webtapak atau hubungi peruncit anda. Simpan bukti pembelian anda untuk tuntutan waranti.

Petua pengguna

• Pengurusan Kabel: Take your time with cable management. A tidy interior not only looks better but also improves airflow and makes future upgrades easier.
• Orientasi Peminat: Ensure your fans are oriented correctly for optimal airflow. Typically, front and bottom fans should be intake, while rear and top fans should be exhaust.
• Pembersihan Penapis Habuk: Make cleaning dust filters a routine task (e.g., once a month) to maintain good airflow and prevent dust buildup inside your PC.
• Keserasian Komponen: Always double-check the dimensions of your CPU cooler, GPU, and PSU against the case's maximum clearance specifications before purchasing.