BENINCA TO.GO 4WV

BENINCA TO.GO 4WV Garage Door Opener Remote Control User Manual

Model: TO.GO 4WV

1. Pengenalan

This manual provides instructions for the BENINCA TO.GO 4WV garage door opener remote control. This device is designed to operate BENINCA garage doors and gate openers using a 433.92MHz rolling code frequency. Please read this manual carefully before use to ensure proper operation and longevity of your remote control.

2. Produk Lebihview

The BENINCA TO.GO 4WV is a compact and reliable hand transmitter featuring four buttons for controlling multiple functions or devices. It utilizes rolling code technology for enhanced security.

2.1 Kandungan Pakej

  • 1 x BENINCA TO.GO 4WV Remote Control
  • 1 x Bateri (dipasang)
  • 1 x Rantai Kunci

2.2 Visual Produk

Depan view of the BENINCA TO.GO 4WV remote control

Rajah 1: Depan view of the remote control with four white buttons.

Muka dekat view of the BENINCA TO.GO 4WV remote control

Rajah 2: Bahagian hadapan terperinci view showing the LED indicator and buttons.

sebelah view of the BENINCA TO.GO 4WV remote control

Rajah 3: Pro sampinganfile alat kawalan jauh.

bersudut view of the BENINCA TO.GO 4WV remote control

Rajah 4: Bersudut view highlighting the ergonomic design.

belakang view of the BENINCA TO.GO 4WV remote control showing battery compartment

Rajah 5: Belakang view with the battery compartment cover.

Dimensions of the BENINCA TO.GO 4WV remote control

Figure 6: Dimensions of the remote control (approximately 70mm x 40mm x 14mm).

2.3 Video Produk

Video 1: Unboxing and demonstration of button functionality.

3. Spesifikasi

CiriSpesifikasi
ModelBENINCA TO.GO 4WV
Model yang SerasiBENINCA TO.GO 2WV, BENINCA TO.GO 4WV
Kekerapan433.92MHz
Kaedah PengekodanRolling Code
Butang4
BateriTermasuk
asal usulTanah Besar China
PensijilanCE

4. Persediaan dan Pengaturcaraan

To program your BENINCA TO.GO 4WV remote control, you will need access to your existing BENINCA receiver or opener unit. The programming procedure typically involves interacting directly with the receiver unit, not just the remote itself.

General Programming Steps (may vary by receiver model):

  1. Cari Penerima: Find the control unit for your garage door or gate opener. This is usually located near the motor or inside a control box.
  2. Akses Butang Pengaturcaraan: On the receiver, locate the programming button (often labeled 'PROG', 'MEMO', 'LEARN', or similar). Consult your original BENINCA receiver/opener manual for its exact location and labeling.
  3. Aktifkan Mod Pembelajaran: Press and release the programming button on the receiver. An LED indicator on the receiver should light up or flash, indicating it is in learning mode.
  4. Transmit Code from New Remote: Within a few seconds (usually 5-10 seconds), press and hold the desired button on your new BENINCA TO.GO 4WV remote control that you wish to program.
  5. Sahkan Pengaturcaraan: The LED on the receiver should change its state (e.g., flash rapidly, turn off, or light up solid) to confirm successful programming. Release the button on the remote.
  6. Ujian Jauh: Wait a few seconds for the receiver to exit learning mode, then test the newly programmed button on your remote control to ensure it operates the garage door or gate.

Important: Always refer to the specific instruction manual for your BENINCA receiver/opener model for precise programming steps, as procedures can vary. Ensure you have access to your receiver before attempting to program the remote.

5. Operasi

Once programmed, operating your BENINCA TO.GO 4WV remote control is straightforward:

  1. Point the remote control towards your garage door or gate opener.
  2. Press the programmed button corresponding to the function you wish to activate (e.g., open, close, stop).
  3. The LED indicator on the remote control will light up briefly when a button is pressed, confirming signal transmission.
Hand holding the remote and pressing a button

Figure 7: Demonstrating button press on the remote control.

6. Penyelenggaraan

6.1 Penggantian Bateri

The remote control comes with a pre-installed battery. If the remote's range decreases significantly or the LED indicator does not light up when a button is pressed, it's likely time to replace the battery.

Untuk menggantikan bateri:

  1. Locate the battery compartment cover on the back of the remote control (refer to Figure 5).
  2. Carefully open the compartment using a small screwdriver or by sliding the cover as indicated.
  3. Remove the old battery. Note its orientation (+/-).
  4. Insert a new battery of the same type, ensuring correct polarity.
  5. Tutup penutup petak bateri dengan selamat.

Warning: Dispose of old batteries responsibly according to local regulations. Keep batteries out of reach of children.

6.2 Pembersihan

Lap alat kawalan jauh dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang kasar, kerana ini boleh merosakkanasing atau komponen dalaman.

7. Penyelesaian masalah

If your remote control is not functioning as expected, try the following troubleshooting steps:

  • Alat kawalan jauh tidak berfungsi selepas pengaturcaraan: Double-check the programming steps in your receiver's manual. Ensure the receiver was in learning mode and the correct button was pressed on the remote.
  • Julat operasi pendek: Replace the battery in the remote control. Ensure there are no obstructions between the remote and the receiver. Check for sources of radio interference (e.g., other wireless devices, metal structures).
  • LED on remote does not light up: The battery may be dead or incorrectly installed. Replace the battery.
  • Kerja jarak jauh berfungsi secara berselang-seli: This could indicate a low battery, interference, or a loose connection inside the remote. Try replacing the battery first.

If the issue persists after trying these steps, contact customer support or a qualified technician.

8. Petua Pengguna

  • Keep Receiver Manual Handy: For programming and advanced settings, always refer to the instruction manual of your BENINCA garage door or gate receiver/opener. This is crucial for successful setup.
  • Julat Ujian: After programming, test the remote's operating range from various distances and angles to ensure reliable performance.
  • Secure Your Remote: Treat your remote control like a key. Keep it in a secure location to prevent unauthorized access to your garage or gate.

9. Waranti dan Sokongan

Untuk maklumat waranti, sokongan teknikal atau pertanyaan perkhidmatan, sila rujuk dokumentasi yang diberikan bersama pembelian anda atau hubungi terus penjual. Simpan bukti pembelian anda untuk tuntutan waranti.

Dokumen Berkaitan - TO.GO 4WV

Praview Beninca THINKY Advanced Rolling Code Gate Automation System
Comprehensive guide to the Beninca THINKY gate automation system, covering installation, programming, functions, and troubleshooting. Learn about advanced rolling code technology for enhanced security.
Praview Beninca BRAINY Control Unit - Technical Manual and Specifications
Comprehensive technical manual for the Beninca BRAINY control unit, detailing installation, programming, functions, safety features, and troubleshooting for gate automation systems.
Praview Manual Pengguna Sistem Pintu Gelongsor Automatik Benincà BISON 35 OTI
Manual pengguna yang komprehensif untuk sistem pintu gelangsar automatik Benincà BISON 35 OTI, meliputi pemasangan, spesifikasi, keselamatan, penyelenggaraan dan butiran teknikal untuk pintu gelangsar perindustrian sehingga 3500kg.
Praview Beninca BE.CODE Manual Pad Kekunci Digital Boleh Aturcara
Dokumen ini menyediakan arahan dan spesifikasi teknikal untuk pad kekunci digital boleh atur cara Beninca BE.CODE, peranti wayarles untuk mengawal sistem pintu dan pintu automatik.
Praview Beninca BEN24 Knikarm Poortopener en CP.BN Sturing Installatiehandleiding
Uitgebreide installatie- en gebruikershandleiding voor de Beninca BEN24 knikarm poortopener en de CP.BN besturingseenheid. Bevat technische specificaties, montage-arahan, aansluitschema's, programmeeropties en veiligheidsrichtlijnen.
Praview Beninca ZED24/ZED24E Electromechanical Actuator for Tilt-Up Doors - Installation and User Manual
Comprehensive guide for the Beninca ZED24 and ZED24E electromechanical actuators, covering installation, operation, safety, and technical specifications for tilt-up doors. Includes multilingual safety instructions and a detailed parts list.