1. Pengenalan
The JDiag M200 Pro is a new generation handheld diagnostic tool designed for motorcycles. It features a dual-system testing capability, combining EFI (Electronic Fuel Injection) system diagnostics with comprehensive battery testing. Equipped with a new generation processing chip, it offers faster testing and a user-friendly handheld design. The device supports WiFi online and SD card upgrades, boasts large-capacity storage, and includes a reserved CAN bus interface. Its 3.5-inch color screen provides a clear display, and a built-in thermal printer allows for data printing. It also displays dynamic data values and waveforms for detailed analysis.
The motorbike diagnostic system allows for functions such as resetting service lights, performing injection adjustments (CO Trimmer), adjusting the throttle position sensor (TPS), resetting auto-adaptive parameters, and performing idle adjustments. The tool displays live data, ECU data, and reads stored fault codes (historical) or live data (RPM, battery voltage, throttle angle).
The battery diagnostic system is specifically designed for assessing the health of 12V/24V batteries, conducting starting tests, and evaluating charging system performance. Additionally, it features a signal simulator to generate crankshaft, PWM, injector, and ignition signals, along with functions for detecting injector signals and injector cleaning.
2. Ciri-ciri Produk
The JDiag M200 Pro is a multi-purpose device capable of various testing functions:
- Membaca maklumat sistem
- Ujian Sistem ABS
- Ujian permulaan
- Pembacaan kod kesalahan
- Data beku
- Ujian Pengecasan
- Ujian penggerak
- Percetakan data
- Pengesanan bateri
- DTC (Diagnostic Trouble Code) Enquiry
- Panduan penyelesaian masalah
- Ujian geganti
- Kosongkan kod kesalahan
- Pelarasan kelajuan terbiar CO
- Keluaran isyarat
- Baca aliran data
- Ujian penyuntik
3. Kandungan Pakej
The JDiag M200 Pro package includes the following items:
- JDiag M200 Main Unit
- Kotak Alat
- Manual Pengguna
- Relay Closure
- Kertas Cetak
- Diagnostic Cables:
- Main Test (01)
- OBD-16P (02)
- Cable Generation (03)
- Aprilia/Honda/Kawasaki (04-05)
- Suzuki-I (06)
- Suzuki-II (07)
- Suzuki-III (08)
- SYM (09)
- KYMCO (10)
- PGO-6P (11)
- AEON/BENLLIPRO (12)
- Kawasaki-1 (13)
- Yamaha-2 (14)
- Type-C to USB (15)
- Kuasa Clamp/Battery Test (16/17)
- Hartford (18)
- Kawasaki-2 (19)
- Kawasaki-3 (20)
- Kawasaki-4 (21)
- Kawasaki-5 (22)
- Kawasaki-6 (23)
- KTM (24)
- Universal jump cable
- Double-ended Type-C cable
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | M200 Full Version |
| Paparan | 3.5'' Color Screen |
| Bekalan Kuasa | DC8V-30V |
| Arus Operasi | 150mA |
| Suhu Operasi | 0-70°C |
| Kelembapan | <90% |
| Naik taraf Pelabuhan | WiFi/USB |
| Pelabuhan Komunikasi | port COM |
| Dimensi (Anggaran) | Tinggi: 23cm, Lebar: 11.2cm |
| Bahasa yang Disokong | English, Chinese Traditional, Spanish, French, Cambodian, Thai, Turkish, Vietnamese, Indonesian, Portuguese, Japanese, Korean, German |
| Fungsi | Motorcycle Diagnostic, 12V Battery Testing |
5. Persediaan
5.1 Penghidupan Awal dan Pemilihan Bahasa
- Connect the M200 Pro to a power source (e.g., motorcycle battery or external DC power supply within the specified voltage julat).
- Peranti akan dihidupkan dan memaparkan menu utama.
- Navigate to the "SETUP" option using the directional buttons and press "OK".
- In the "BASIC SETUP" menu, select "LANGUAGE" and press "OK".
- Scroll through the list of available languages (English, Chinese Traditional, Spanish, French, Cambodian, Thai, Turkish, Vietnamese, Indonesian, Portuguese, Japanese, Korean, German) and select your preferred language by pressing "OK".
5.2 WiFi Online Upgrade Setup
The M200 Pro supports online software updates via its built-in 2.4G high-speed transmission WiFi module.
- From the main menu, select "Upgrade" and press "OK".
- Choose "WIFI Upgrade" from the options.
- The device will prompt you to enter the WiFi network name (SSID) and password. Use the on-screen keyboard and directional buttons to input the details.
- Once connected, the device will check for and download available updates automatically.
6. Operasi
6.1 Motorbike Diagnostic System
- From the main menu, select "DIAGNOSIS" and press "OK".
- Choose the appropriate motorcycle brand from the displayed list (e.g., AEON, APRILIA, BENEL1, BMW, HONDA, KAWASAKI, KTM, SUZUKI, YAMAHA, etc.).
- Follow the on-screen prompts to connect the correct diagnostic cable to your motorcycle's OBD port and the M200 Pro.
- Once connected, you can perform various diagnostic functions:
- Read Data Streams: View real-time data from the ECU (e.g., RPM, battery voltage, throttle angle).
- Baca Kod Kesalahan: Retrieve stored diagnostic trouble codes (DTCs).
- Kosongkan Kod Kesalahan: Erase DTCs from the ECU after repairs.
- ABS System Test: Perform specific tests related to the Anti-lock Braking System.
- CO Idle Speed Adjustment: Adjust the CO mixture and idle speed.
- Ujian Penggerak: Test individual components like injectors, relays, etc.
- Panduan Penyelesaian Masalah: Access guided troubleshooting procedures.
6.2 Mod Ujian Bateri
This mode is used to diagnose the health of 12V/24V batteries and test the starting and charging systems.
- From the main menu, select "BATTERY" and press "OK".
- Connect the Power Clamp/Battery Test cables (16/17) to the battery terminals.
- Choose from the following test options:
- Ujian Pantas: Provides a rapid assessment of battery condition.
- Standard Test: Offers a more detailed analysis of battery parameters.
- Start-up Test: Evaluates the battery's performance during engine cranking.
- Charge Test: Assesses the charging system's output.
- Follow the on-screen instructions for each test.
6.3 Signal Simulator
The signal simulator can generate various signals for testing purposes.
- From the main menu, select "Signal Out" (or similar option under "DIAGNOSIS" or "SETUP").
- Choose the type of signal to simulate:
- Crankshaft Signal
- Isyarat PWM
- Injector Signal
- Isyarat Pencucuhan
- Adjust parameters as needed and connect the appropriate output to the component being tested.
6.4 Injector Testing / Signal Detection
This function allows for testing and cleaning of fuel injectors.
- From the main menu, select "Injector" and press "OK".
- To clean injectors, select "Mode 4" and follow the instructions to connect the cleaning agent.
- For injector signal detection, select the relevant option and connect the device to the injector circuit.
6.5 Data Printing
The M200 Pro includes a built-in thermal printer for immediate printouts of diagnostic reports.
- After completing a diagnostic test, look for a "Print" or "Data Printing" option on the screen.
- Ensure print paper is loaded correctly in the device.
- Select the print option to generate a hard copy of the results.
6.6 Fungsi Tangkapan Skrin
To capture a screenshot of the current display, simultaneously press the F1 and F2 buttons.
7. Penyelenggaraan
- Pembersihan: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive cleaners.
- Storan: Store the M200 Pro in its protective tool box in a dry, cool place when not in use. Avoid extreme temperatures and direct sunlight.
- Kemas Kini Perisian: Regularly check for and install software updates via WiFi or USB to ensure optimal performance and compatibility with new motorcycle models and diagnostic protocols.
- Penjagaan Kabel: Inspect diagnostic cables regularly for any signs of wear or damage. Replace damaged cables immediately to prevent electrical hazards or inaccurate readings.
8. Penyelesaian masalah
- Peranti tidak dihidupkan:
- Ensure the power supply is within the DC8V-30V range.
- Check all power connections for secure fit.
- If using a motorcycle battery, ensure the battery has sufficient charge.
- No communication with motorcycle ECU:
- Verify that the correct diagnostic cable is selected and securely connected to both the M200 Pro and the motorcycle's OBD port.
- Ensure the motorcycle's ignition is on.
- Check if the motorcycle model is supported by the device.
- Inaccurate readings or test results:
- Pastikan semua sambungan bersih dan selamat.
- Perform a software update to ensure the latest diagnostic algorithms are in use.
- Consult the troubleshooting guide within the device's software for specific error codes.
- Isu sambungan WiFi:
- Verify the WiFi network name (SSID) and password are entered correctly.
- Ensure the device is within range of a 2.4G WiFi network.
- Mulakan semula peranti dan cuba sambungkan semula.
9. Petua Pengguna
- Kemas Kini Biasa: Always keep your M200 Pro software updated to ensure compatibility with the newest motorcycle models and diagnostic protocols. This can often resolve unexpected issues.
- Pengurusan Kabel: With many specialized cables included, it's helpful to label them or store them in an organized manner within the tool box to quickly identify the correct cable for each motorcycle brand.
- Kesihatan Bateri: For accurate battery testing, ensure the battery terminals are clean and free of corrosion before connecting the test clamps.
10. Waranti dan Sokongan
10.1 Maklumat Waranti
The JDiag M200 Pro comes with a Waranti 12 bulan dari tarikh pembelian. Waranti ini meliputi kecacatan pembuatan dan kerosakan dalam penggunaan biasa. Sila simpan bukti pembelian anda untuk tuntutan waranti.
10.2 Sokongan Teknikal
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your original point of purchase or refer to the official JDiag webtapak untuk sumber sokongan.
