HITBOX ARC-200mini3 2-in-1 MMA LIFT TIG Welding Machine User Manual

1. Pengenalan

Thank you for choosing the HITBOX ARC-200mini3 2-in-1 MMA LIFT TIG Welding Machine. This compact and lightweight inverter welder is designed for both MMA (Stick) and LIFT TIG welding, making it suitable for various DIY, maintenance, repair, and metal fabrication tasks. It features an intelligent LED display for easy operation and internal protection devices to ensure safe use. This manual provides essential information for the safe and efficient operation and maintenance of your welding machine.

2. Langkah-langkah Keselamatan

Welding can be dangerous. Always follow safety guidelines to prevent injury or damage. Read and understand all safety information before operating the machine.

• Kejutan elektrik: Can kill. Do not touch live electrical parts. Wear dry, insulating gloves and protective clothing. Ensure the workpiece is properly grounded.
• Asap dan Gas: Boleh membahayakan kesihatan anda. Jauhkan kepala anda daripada asap. Gunakan pengudaraan atau ekzos yang mencukupi pada arka untuk menjauhkan asap dan gas daripada zon pernafasan.
• Sinar Arka: Can burn eyes and skin. Wear a welding helmet with a proper shade filter. Wear appropriate eye protection with side shields. Wear protective clothing made from durable, flame-resistant material.
• Kebakaran dan Letupan: Percikan api kimpalan boleh menyebabkan kebakaran atau letupan. Jauhkan bahan mudah terbakar dari kawasan kimpalan. Sediakan alat pemadam api berdekatan.
• Terbakar: Hot metal can cause severe burns. Do not touch hot parts with bare hands. Allow the workpiece to cool before handling.
• Penempatan Mesin: Letakkan mesin di atas permukaan yang stabil dan rata. Pastikan pengudaraan yang mencukupi di sekitar mesin untuk mengelakkan pemanasan melampau.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• 1x Pengimpal ARC200mini3
• 1x Pemegang Elektrod
• 1x Bumi Clamp
• 5x Welding Rod
• 1x Berus Pembersih
• 1x Manual Arahan

Note: If you purchased the 'With 17V Torch' variant, your package will also include:

• 1x WP17V Lift Tig Torch

4. Produk Lebihview

4.1 Ciri-ciri Utama

• Fungsi 2-dalam-1: Supports both MMA (Stick) and LIFT TIG welding.
• Paparan LED Pintar: Provides clear readings for welding current, mode selection (MMA/LIFT TIG), and indicators for Arc Force, Hot Start, Anti-stick, VRD (Voltage Reduction Device), and ERR (Error).
• Mudah Alih & Ringan: Compact design (9.25x5.9x4.5 inches) and light weight (2.1 kg / 5.95 lbs) for easy transport.
• Teknologi Penyongsang Lanjutan: Utilizes IGBT technology for stable and efficient welding performance.
• Synergy Chip Technology: Automatically matches the starting arc current based on metal thickness, simplifying operation for beginners.
• Perlindungan Keselamatan: Equipped with internal protection against overheating and overcurrent.
• Fast Cooling & Low Noise: Efficient cooling system and high-quality materials reduce machine noise and prevent overheating.

4.2 Pengenalan Panel Kawalan

The front panel features a digital LED display and control knob for easy adjustment and monitoring.

1. Paparan Semasa: Shows the welding current in Amperes.
2. Petunjuk Fungsi MMA: Lights up when MMA welding mode is selected.
3. Penunjuk Fungsi Angkat TIG: Lights up when LIFT TIG welding mode is selected.
4. Penunjuk Kuasa & Abnormal: Menunjukkan status kuasa dan keadaan ralat.
5. Butang Tukar Mod: Press to switch between MMA and LIFT TIG modes.
6. Tombol Peraturan Semasa: Rotate to adjust the welding current. Press to set the function (e.g., Arc Force, Hot Start, Anti-stick, VRD).
7. Penyambung Keluaran "+": Terminal positif untuk kabel kimpalan.
8. Penyambung Keluaran "-": Terminal negatif untuk kabel kimpalan.
9. Input Kuasa: Sambungan untuk kabel kuasa utama.
10. Suis ON / OFF Kuasa: Main power switch for the machine.
11. Kipas Penyejuk: Menyediakan penyejukan untuk komponen dalaman.

5. Arahan Persediaan

5.1 MMA (Stick) Welding Connection

1. Pastikan mesin dimatikan dan dicabut plag.
2. Connect the Electrode Holder cable to the "-" Output Connector (8) on the front panel.
3. Sambungkan Cl Tanahamp kabel ke "+" Output Connector (7) on the front panel.
4. Pasangkan tanah cl dengan selamatamp ke benda kerja atau meja kimpalan.
5. Insert a suitable welding rod into the electrode holder.

5.2 LIFT TIG Welding Connection

Note: A TIG torch (e.g., WP17V) and gas cylinder are required and may need to be purchased separately.

1. Pastikan mesin dimatikan dan dicabut plag.
2. Connect the TIG Torch cable to the "+" Output Connector (7) on the front panel.
3. Sambungkan Cl Tanahamp kabel ke "-" Output Connector (8) on the front panel.
4. Pasangkan tanah cl dengan selamatamp ke benda kerja atau meja kimpalan.
5. Connect the gas hose from the TIG torch to a suitable inert gas cylinder (e.g., Argon) with a regulator.
6. Ensure the tungsten electrode is correctly installed in the TIG torch.

6. Operasi

6.1 Hidupkan

1. Plug the machine into a suitable power outlet (AV90-240V).
2. Turn on the Power ON/OFF Switch (10) located on the rear panel. The LED display will light up.

6.2 Pemilihan Mod

1. Press the Mode Switching Button (5) to toggle between MMA and LIFT TIG welding modes. The corresponding indicator (2 or 3) on the LED display will illuminate.

6.3 Pelarasan Semasa

1. Rotate the Current Regulation Knob (6) to adjust the welding current (Amperes) displayed on the Current Display (1).
2. For advanced functions like Arc Force, Hot Start, Anti-stick, or VRD, press the Current Regulation Knob (6) to cycle through these settings and then rotate to adjust their values if applicable.

6.4 Proses Kimpalan

The HITBOX ARC-200mini3 is suitable for welding various materials including Mild Steel, Stainless Steel, Steel Plate, Square Pipe, Carbon Steel, and Galvanized Sheet. It works with materials up to 5 mm thick and welding rods/electrodes from 1.0-3.2mm (e.g., E7018/E6013).

7. Penyelenggaraan

Penyelenggaraan berkala memastikan jangka hayat dan operasi mesin kimpalan anda yang selamat.

• Pembersihan: Regularly clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
• Pemeriksaan Kabel: Periodically inspect all welding cables, electrode holders, and ground clampuntuk kerosakan, keretakan atau sambungan longgar. Gantikan komponen yang rosak dengan segera.
• Pemeriksaan Kipas: Ensure the cooling fan (11) is free from obstructions and operating correctly.
• Storan: Store the machine in a dry, clean environment away from excessive dust, moisture, and corrosive materials.

8. Penyelesaian masalah

Jika anda menghadapi masalah, rujuk kepada masalah dan penyelesaian biasa berikut:

9. Spesifikasi

10. Petua Pengguna

• TIG Gas Connection: For LIFT TIG welding, remember that the gas bottle connection is external to the machine. Ensure your TIG torch is properly connected to an inert gas supply (e.g., Argon) via a regulator for optimal weld quality and to protect the tungsten electrode.
• Tungsten Electrode Diameter: The machine supports various tungsten electrode diameters. Always match the tungsten electrode size to your welding current and material thickness for the best results. Common sizes for this machine's range might include 1.6mm or 2.4mm.
• Amperage Understanding: While the machine has synergy features, understanding the relationship between amperage, material thickness, and electrode size is crucial for achieving desired weld penetration and appearance. Experiment with settings on scrap material before working on your main project.

11. Waranti dan Sokongan

The HITBOX ARC-200mini3 welding machine comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.