VEVOR Rendah Profile Manual Arahan Floor Jack

1. Pengenalan

Thank you for choosing the VEVOR Low Profile Floor Jack. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new floor jack. Please read this manual thoroughly before use and keep it for future reference.

VEVOR Low Profile Floor Jack is a heavy-duty steel racing floor jack designed for lifting various vehicles. It features a versatile lifting range, a dual piston pump for quick lifting, and robust all-steel construction. It is ideal for tasks such as tire changes, oil maintenance, and brake servicing.

2. Maklumat Keselamatan

AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan kecederaan serius atau kerosakan harta benda.

• Always operate the floor jack on a hard, level surface.
• Never exceed the rated capacity of the jack.
• Use appropriate jack stands to support the vehicle immediately after lifting. Do not rely solely on the jack for support.
• Ensure the vehicle is in park (automatic) or gear (manual) and the parking brake is engaged. Block wheels that are not being lifted.
• Position the jack saddle under the vehicle's designated lifting points as specified by the vehicle manufacturer.
• Keep hands and feet clear of the jack and vehicle during lifting and lowering operations.
• Pakai peralatan perlindungan diri (PPE) yang sesuai, seperti cermin mata keselamatan dan sarung tangan.
• Do not modify the jack or use it for purposes other than its intended use.
• This jack complies with CE certification (2006/42/EC (EN1494)), UKCA certification (SI 2008 NO.1597(BS EN1494)), and ASME PALD-2014 SAFETY STANDARD. It features a built-in safety load system to prevent use beyond its load capacity.

3. Produk Lebihview

3.1 Ciri-ciri Utama

• Kapasiti Tinggi: Available in 2.5 Ton (5500 lbs), 3 Ton (6600 lbs), and 4 Ton (8800 lbs) models.
• Versatile Lifting Range: Minimum height as low as 2.9" / 75 mm (for low-clearance vehicles) and maximum height up to 21" / 533 mm (suitable for SUVs and pickups).
• Dual Piston Pump: Achieves maximum height in 7 full strokes, offering 5 times faster lifting compared to single pump designs.
• Pembinaan Teguh: Made from heavy-strength, all-steel for long-term durability and stability in both everyday and industrial use.
• Reka bentuk pelindung: Features a 360° rotatable rubber saddle and a foam handle bumper to prevent damage to your vehicle.
• Pemegang Lanjutan: A 45.3" / 1150 mm (or 52" / 1320 mm for some 4-ton models) long handle provides excellent leverage and is a two-piece design for easy storage.
• Mudah dikendalikan: Equipped with steel wheels, including two universal rear wheels, for smooth positioning and movement.
• Convenient Magnetic Tray: A magnetic tray on top of the jack provides a handy spot for small tools and parts.

3.2 Rajah Komponen

The main components include the lifting arm, saddle, handle, pump mechanism, and wheels. Specific details may vary slightly between models (e.g., 2.5 Ton, 3 Ton, 4 Ton).

3.3 Ciri-ciri Visual

4. Spesifikasi

VEVOR Low Profile Floor Jack is available in several capacities. Please refer to the specific model you own for exact specifications.

4.1 2.5 Ton (5500 lbs) Dual Pump Model

4.2 3 Ton (6600 lbs) Single Pump Model

4.3 4 Ton (8800 lbs) Dual Pump Model

Note: Another 4 Ton model (Item Model Number: WD-B-04000-B00-0) has a Net Weight of 100.6 lbs / 45.6 kg, Product Dimensions of 30.7 x 16.9 x 9.1 in / 780 x 430 x 230 mm, a 50" / 1260 mm Handle Length, and a Tray Diameter of 4.7" / 119 mm.

5. Arahan Persediaan

Follow these steps to assemble and prepare your VEVOR Floor Jack for use:

1. Sambungkan Pemegang:

   

   Connect the two pieces of the handle together. Insert the assembled handle into the socket on the jack. Tighten the nut securely to ensure the handle is firmly attached.
2. Purge Air (Initial Use): Before first use, or if the jack has been stored for a long time, it's recommended to purge any air from the hydraulic system.
   • Turn the handle counter-clockwise to fully open the release valve.
   • Pam pemegang dengan cepat beberapa kali.
   • Turn the handle clockwise to close the release valve. The jack should now be ready for operation.

6. Arahan Operasi

Always refer to your vehicle's owner's manual for specific lifting points and procedures.

1. Sediakan Kenderaan:
   • Park the vehicle on a hard, level surface.
   • Pasang brek letak kereta.
   • Place the transmission in "Park" (automatic) or a low gear (manual).
   • Block the wheels that are not being lifted to prevent accidental movement.
2. Close the Release Valve:

   

   Twist the handle clockwise until it is in the tightest position. This closes the release valve and prepares the jack for lifting.
3. Letakkan Jack:

   

   Roll the jack under the vehicle and position the rubber saddle directly under the manufacturer's recommended lifting point. Ensure the saddle is centered and stable.
4. Angkat Kenderaan:

   

   Pump the handle up and down with full strokes to raise the vehicle to the desired height. Lift only high enough to perform the necessary work.
5. Selamat dengan Jack Stands:

   IMPORTANT: Immediately place appropriately rated jack stands under the vehicle's frame or designated support points. Never work under a vehicle supported only by a floor jack.

   Once the vehicle is at the desired height, carefully lower it onto the jack stands by slowly turning the handle counter-clockwise to open the release valve. Ensure the vehicle is securely resting on the jack stands before proceeding.
6. Turunkan Kenderaan:

   

   After completing work and removing jack stands, ensure no one is under the vehicle. Slowly turn the handle counter-clockwise to open the release valve. The vehicle will lower slowly and automatically. Once fully lowered, remove the jack.

7. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your floor jack.

• Pelinciran: Periodically lubricate all moving parts, including the pivot points and wheels, with light machine oil.
• Bendalir Hidraulik: Check the hydraulic fluid level every few months. If low, replenish with high-quality hydraulic jack oil. Do not use brake fluid or other non-approved fluids.
• Pembersihan: Keep the jack clean from dirt, grease, and corrosive materials. Wipe down the ram and pump mechanism after each use.
• Pemeriksaan: Before each use, inspect the jack for any signs of damage, leaks, or wear. Check for loose bolts, bent components, or cracks. Do not use a damaged jack.
• Storan: Store the jack in a clean, dry place with the ram fully retracted to prevent corrosion and extend seal life.

8. Penyelesaian masalah

Berikut ialah beberapa isu biasa dan potensi penyelesaiannya:

If problems persist, contact VEVOR customer support.

9. Petua Pengguna

• Tempoh Pecah Masuk: For new jacks, perform a few full lift and lower cycles without a load to ensure proper lubrication and air purging.
• Saddle Pad: Always use the rubber saddle pad to protect the vehicle's chassis and prevent slipping.
• Handle Storage: The two-piece handle design allows for compact storage. Disassemble it when not in use to save space.
• Pro Rendahfile Advantage: Ambil advantage of the jack's low profile design (as low as 2.9 inches) to easily access lifting points on sports cars and modified vehicles.

10. Waranti dan Sokongan

For warranty information, technical support, or replacement parts, please contact VEVOR customer service. Keep your purchase receipt and product model information handy when contacting support.

VEVOR is committed to providing quality tools and equipment. For more information, visit the official VEVOR webtapak atau hubungi saluran sokongan pelanggan mereka.