Benton Portable 4G Router User Manual

1. Produk Lebihview

Thank you for choosing the Benton LTE MiFi Portable 4G Router. This device provides portable Wi-Fi connectivity, allowing you to share internet access from a 4G/5G SIM card with multiple devices. It features a compact design, a clear LCD screen for data display, and a built-in battery for on-the-go use.

Ciri-ciri Utama:

• Ketersambungan: Supports 4G LTE (FDD and TDD bands) and 3G WCDMA.
• Standard Wi-Fi: M126T features WiFi6 (802.11ax), M100 features WiFi4 (802.11 b/g/n).
• Kelajuan: Up to 150Mbps 2.4G Wi-Fi Transmission Rate.
• Bateri: Available with 3000mAh or 2050mAh battery options.
• mudah alih: Compact and lightweight design, ideal for travel, SOHO, and outdoor activities.
• paparan: 1.44-inch LCD screen for clear data display.
• Keselamatan: Supports WPA/WPA2 security protocols.
• Sokongan Peranti: Connects up to 10 wireless devices simultaneously.
• Fungsi Tambahan: USB Network Sharing (charging + data), Manual Network Selection, SMS Function.

Kandungan Pakej:

Pakej biasanya termasuk:

• 1 x M126T Router (or M100 Router, depending on model)
• 1 x Kabel Pengecasan (USB-C)
• 1 x User Manual (this document, or a printed version)

2. Panduan Persediaan

2.1. Bermula

This guide provides the basic operations of the MiFi. For advanced configuration, log into the web antara muka pengguna grafik dan klik ikon bantuan di sudut kanan atas.

2.2. Install SIM Card and Battery

1. Matikan MiFi. Ensure the device is completely turned off before proceeding.
2. Tanggalkan penutup belakang dan bateri. Gently pry open the back cover and remove the battery.
3. Masukkan kad SIM ke dalam slot kad dalam kedudukan yang betul. The device requires a Nano SIM card. Refer to the diagram below for correct insertion.
4. Pasang penutup belakang dan bateri. Replace the battery and snap the back cover securely into place.

Note: DO NOT remove the LTE SIM card when the MiFi is powered on as this may damage the card and the MiFi.

2.3. Turning on the MiFi

Press the power button and hold for a while until the screen is lit, and Wi-Fi is on.

2.4. Setting Up a Wi-Fi Connection

To connect your devices to the MiFi's Wi-Fi network:

1. Hidupkan MiFi.
2. Connect your device (e.g., computer, smartphone) to the MiFi. You can do this via Wi-Fi or, if supported by your device and the MiFi model, via a wired USB connection for network sharing.
3. Ensure the LTE MiFi's Wi-Fi function is on.
4. Pada peranti anda, cari rangkaian Wi-Fi yang tersedia.
5. Select the wireless network connection with the LTE MiFi's SSID (Network Name) and click "Connect". The SSID and network key (password) are typically printed on a label inside the MiFi's battery compartment or on the device itself.
6. Enter the correct network key (password) if prompted.

2.5. Logging into the Device Management Webtapak

The device management website allows you to configure advanced settings for your MiFi.

1. Make sure your end-user device is connected to the MiFi's Wi-Fi network.
2. Buka a web penyemak imbas pada peranti anda yang disambungkan.
3. Masuk http://192.168.0.1 or http://192.168.1.1 (refer to the device label for the exact address) in the address bar and press Enter.
4. Enter the username and password, and click "login". The default username and password are admin.

2.6. Network Mode Selection

You can manually select the network channel to get better signal and network performance.

3. Operasi

3.1. Basic Info on Screen Display

The MiFi's LCD screen provides essential information at a glance:

1. Kuasa Bateri
2. Kekuatan Isyarat Wi-Fi
3. Number of Users Connected
4. Network Type (e.g., 4G LTE)
5. Signal Strength of Cellular Network
6. Statistik Lalu Lintas
7. Nama Penyedia Perkhidmatan Rangkaian

3.2. USB Network Sharing

The Type-C port on the MiFi is not only for charging but also supports network sharing. Connect the MiFi to a computer via a USB-C cable to share its internet connection.

3.3. Fungsi SMS

Users can read, write, send, and receive messages on the router's service website. This allows you to manage SMS communications related to your SIM card directly through the MiFi's interface.

3.4. Creating a Safe Wi-Fi in Public

The router launches Wi-Fi via the network of the SIM card and supports various SIM cards from different communication operators, making it suitable for creating a secure personal hotspot in various public settings.

4. Penyelenggaraan

4.1. Charging your MiFi

There are two methods to charge your MiFi:

1. Charging by power adapter: Use a compatible power adapter (5V, 1000mA). Note that the power adapter is a selective accessory and may not be included.
2. Charging by connecting to a computer or laptop: Use the provided USB-C cable to connect the MiFi to a computer or laptop.

Note: If the MiFi hasn't been used for a long time, please charge the battery before using.

4.2. USB Storage

Connect the MiFi to a computer via a data cable. Once the computer reads an inserted T-Flash card (if present) in the MiFi, it will function as USB storage, allowing you to access files pada kad.

4.3. Pulihkan Tetapan Kilang

If you are uncertain about your Wi-Fi settings or wish to revert to default configurations, you can restore factory settings:

• Via Device Management Webtapak: Log masuk ke Pengurusan Peranti Website and navigate to the appropriate section to restore factory default settings.
• Via Reset Button: Press and hold the "Reset" button for 5 seconds. The MiFi will reactivate and restore to factory settings.

Note: Restoring factory settings will delete all user-defined Wi-Fi settings and restore Admin settings and Wi-Fi settings to their factory defaults.

5. Penyelesaian masalah

If you encounter issues with your MiFi, consider the following:

1. Consult the FAQ: View the FAQ available on the device management website by clicking the help icon in the top right corner.
2. Peranti Tidak Responsif: If the MiFi is not responsive, reboot it by pressing the 'Reset' button for about 5 seconds.
3. Pulihkan Tetapan Kilang: As described in section 4.3, restoring factory settings can resolve many configuration-related issues.

Isu & Penyelesaian Biasa:

• "NO SIM" displayed: Ensure your Nano SIM card is correctly inserted. If your SIM card has a PIN code/lock, you must disable it using a mobile phone or by contacting your carrier before inserting it into the router. Otherwise, the router cannot work with the SIM card successfully.



• No Internet Connection after SIM insertion: Check the APN settings in the device management website. You may need to manually enter the APN profile provided by your SIM card carrier. Restart the router after making changes.
• Kelajuan Perlahan: Ensure you are within optimal coverage range. Try manually selecting a different network channel via the device management webtapak.

6. Spesifikasi

Spesifikasi Umum:

Model Specific Specifications:

Frequency Bands (Reference):

Dimensi Fizikal:

7. Waranti dan Sokongan

This product comes with a 12-month warranty. For any issues or support, please contact Benton Official Store customer service.

For additional guides and documents, you may refer to the official PDF user manual: View Manual Pengguna (PDF)

8. Petua Pengguna

• Keserasian Kad SIM: This router does not support special SIM cards like eSIM, IOT SIM, or Roaming SIMs. Ensure you use a standard Nano SIM card from a local communication operator in the region where you intend to use the device.
• Kod PIN: Always disable any PIN code/lock on your SIM card using a mobile phone or by contacting your communication operator BEFORE inserting it into the MiFi router.
• Speed Expectations: Be aware that advertised speeds (e.g., 150Mbps) are theoretical transmission rates. Actual network speeds may vary based on network conditions, signal strength, and carrier services. Do not expect the same performance as a high-end mobile phone.
• Perayauan: The device does not support roaming. If you are in a different country, you will need to use a SIM card from a local operator in that country.

9. Maklumat Keselamatan

• Perhatian Bateri: Risk of explosion if the battery is replaced with an incorrect or unapproved type. Used batteries must be disposed of according to the manufacturer's instructions.
• Antaramuka USB: Produk MiFi hanya disambungkan menggunakan antara muka USB versi USB2.0.
• Peletakan Penyesuai: The adapter shall be installed near the equipment and shall be easily accessible. The plug is considered a disconnect device of the adapter.
• Suhu Operasi: The maximum operating temperature of the MiFi is 35°C.
• Spesifikasi RF: The device complies with RF specifications when used at 20cm away from the body.
• Pematuhan: Peralatan ini mematuhi keperluan penting dan peruntukan lain yang relevan dari arahan 1999/5 / EC.

10. Video Produk

Tonton video ini untuk cepat selesaiview and demonstration of the Benton Portable 4G Router.