1. Pengenalan
The CYCLAMI Mini Inflator Pump Z5L is a portable electric air compressor designed for convenient and efficient inflation of various items, including bicycle tires, motorcycle tires, car tires, and sports balls. Featuring a digital display, preset tire pressure function with auto start/stop, and emergency lighting, it offers a reliable solution for on-the-go inflation needs.
Figure 1: CYCLAMI Mini Inflator Pump Z5L and included accessories.
2. Kandungan Pakej
Sila semak pakej untuk item berikut:
- CYCLAMI Mini Inflator Pump Z5L (Main Unit)
- Tiub Sambungan
- Jarum Bola
- Penyesuai Presta Injap
- Other Adapters (as pictured)
- Kabel Pengecasan USB Jenis-C
- Manual Pengguna
Rajah 2: Terperinci view of the pump and its accessories.
3. Ciri-ciri Produk
- Output Tekanan Tinggi: Max 130PSI for efficient inflation.
- Smart Inflation: Preset tire pressure with auto start/stop function, thanks to a built-in tire pressure sensor.
- Paparan Digital: Real-time pressure display with switchable PSI and BAR units.
- Pelbagai Mod: Three preset scene modes for different inflation needs (e.g., bicycle, motorcycle, car, ball).
- Pencahayaan Kecemasan: Built-in LED light for use as an emergency flashlight.
- Padat & Mudah Alih: Miniature size, lightweight (~380g), designed for one-hand operation.
- Motor berkuasa: Newly upgraded brushless motor for enhanced inflatable speed.
- Pengecasan Jenis-C: Convenient and universal charging interface.
- Perlindungan Terlalu Panas: Memastikan operasi selamat.
Figure 3: Key features of the CYCLAMI Z5L pump.
4. Spesifikasi
Figure 4: Technical specifications of the CYCLAMI Z5L.
| Parameter | Z5L |
|---|---|
| Tekanan Maksimum | 130PSI |
| Kapasiti Bateri | 2000 * 2mAh |
| Jilid | 15L/min |
| Julat Tetapan Tekanan | 4-130PSI |
| Kaedah Pengecasan | JENIS-C |
| Masa Mengecas | 180min |
| Saiz | 113.5*70*38.5mm |
| Berat badan | ~381g |
| Orifice Compatibility | AV/FV (Schrader/Presta) |
| bahan | ABS + PMMA |
| Bunyi Operasi | ≤76dB |
| Auto Tunggu Sedia | ya |
| Skrin Paparan | ya |
| Perlindungan Terlalu Panas | ya |
| Kekunci Operasi | 5 Butang Mekanikal |
| Hos Dipanjangkan | ya |
5. Persediaan
5.1 Charging the Inflator
- Connect the provided USB Type-C charging cable to the charging port on the inflator.
- Connect the other end of the cable to a compatible USB power adapter (not included) or a power bank.
- The digital display will indicate charging status. A full charge takes approximately 180 minutes.
5.2 Attaching the Hose and Adapters
- Screw the extension tube securely onto the inflator's air outlet.
- Select the appropriate adapter for the item you wish to inflate:
- SV Extension Tube: Suitable for mountain bikes, E-bikes, motorcycles, cars (Schrader valves).
- SV Extension Tube + Adapter: For French valves (Presta valves) on road bikes and some mountain bikes.
- SV Extension Tube + Balloon Needle: For inflating sports balls (basketball, football, soccer, rugby) and swimming rings.
- Attach the selected adapter firmly to the end of the extension tube.
Figure 5: Adapters for various inflation needs.
6. Arahan Operasi
6.1 Menghidupkan/Mematikan
- Hidupkan kuasa: Tekan dan tahan butang kuasa (
) for a few seconds until the digital display illuminates. - Matikan: Press and hold the power button again, or the device will automatically power off after a period of inactivity (auto standby).
6.2 Memahami Paparan Digital
The digital display shows real-time pressure, selected mode, and battery level. You can switch between PSI and BAR units.
Figure 6: Digital display showing pressure units and mode icons.
6.3 Selecting Inflation Mode
Press the 'M' button to cycle through the preset inflation modes:
- Mod basikal
- Mod motosikal
- Mod kereta
- Mod bola
Each mode has a default pressure setting, which can be adjusted.
6.4 Menetapkan Tekanan Sasaran
- After selecting a mode, use the '+' and '-' buttons to increase or decrease the target pressure.
- The display will show the current pressure and the target pressure.
6.5 Memulakan dan Menghentikan Inflasi
- Connect the attached hose and adapter to the valve of the item you wish to inflate.
- Press the power button once to start inflation. The pump will automatically stop when the preset target pressure is reached.
- To manually stop inflation, press the power button again.
Figure 7: Inflating a bicycle tire with auto start/stop.
6.6 Using Emergency Lighting
Tekan butang mentol lampu () to turn on the built-in LED emergency light. Press again to turn it off. This can be used as a flashlight in low-light conditions.
Figure 8: Emergency lighting in use.
6.7 Garis Panduan Tekanan yang Disyorkan
Refer to the table below for general recommended inflation pressures. Always check the manufacturer's recommended pressure for your specific item.
Figure 9: Recommended pressure ranges.
| Borang | Jenis Produk | Julat Tekanan |
|---|---|---|
| Basikal | Basikal Lipat | 45-50PSI |
| 12, 14, 16 inch Bicycle Tires | 30-50PSI | |
| 20, 22, 24 inch Bicycle Tires | 40-50PSI | |
| 26, 27.5, 29 inch Bicycle Tires | 45-65PSI | |
| 700CC Road Bike | 100-110PSI | |
| Motosikal | Motorcycles, Electric Vehicles | 30-43PSI |
| bola | Bola keranjang | 7-9PSI |
| bola sepak | 8-16PSI | |
| bola sepak | 4-5PSI | |
| Ragbi | 2-14PSI |
6.8 Video Demonstrasi Produk
Video: Product demonstration showing features like digital display, preset modes, compact size, 130PSI power, multi-use, and emergency lighting.
7. Penyelenggaraan
- Pembersihan: Lap bahagian luar inflator dengan kain lembut dan kering. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Storan: Store the inflator in a cool, dry place away from direct sunlight and extreme temperatures. Keep it out of reach of children.
- Penjagaan Bateri: To prolong battery life, charge the device regularly, even if not in frequent use. Avoid fully discharging the battery for extended periods.
- Hos dan Penyesuai: Ensure the hose and adapters are clean and free from debris before and after each use to prevent blockages.
8. Penyelesaian masalah
- Peranti tidak dihidupkan: Pastikan bateri dicas. Sambungkan ke sumber kuasa dan cuba lagi.
- Inflation not starting: Check if the hose and adapter are securely connected to both the inflator and the item's valve. Ensure a target pressure is set above the current pressure.
- Bacaan tekanan tidak tepat: Ensure the adapter is tightly sealed to the valve. Environmental factors can sometimes cause minor fluctuations.
- Pump stops unexpectedly: The device has overheat protection. Allow it to cool down before resuming operation. Check battery level.
- Inflasi perlahan: Ensure the battery is sufficiently charged. Check for any blockages in the hose or adapter.
9. Petua Pengguna
- Always check the recommended pressure for your specific item (tire, ball, etc.) before inflating to avoid over-inflation or under-inflation.
- For bicycle tires, especially road bikes, ensure the Presta valve adapter is used correctly and the valve core is open before attaching the pump.
- Keep the inflator charged, especially before long trips, to ensure it's ready for emergencies.
- The emergency light is useful for nighttime repairs or visibility; remember to turn it off when not needed to conserve battery.
- When inflating small items like balls, monitor the pressure closely as they inflate quickly.
10. Waranti dan Sokongan
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the official CYCLAMI webtapak. Simpan resit pembelian anda sebagai bukti pembelian.
