1. Pengenalan
The LILYTECH ZL-6231A is a high-precision incubator controller and thermostat designed for applications requiring accurate temperature regulation and timed operations. This versatile device integrates the functionalities of a thermostat and a multifunctional timer, making it suitable for various uses such as incubators, terrariums, fermentation chambers, and other temperature-controlled environments. It offers a wide temperature setting range and a clear digital display for easy monitoring and adjustment.
2. Spesifikasi
| Sensor Line Length | 2 meter |
| Keluaran | Rintangan 10A, 250Vac |
| Julat Tetapan | -40 ~ 120 Celsius |
| Julat Paparan | -40 ~ 130 Celsius |
| Suhu Bekerja | -10 ~ 45 Celsius |
| Kelembapan Relatif | 5 ~ 90%, bukan pemeluwapan |
| Dimensi (W x H x D) | 78 x 34.5 x 71 mm |
| Installation Drilling (W x H) | 71 x 29 mm |
| Tahap Perlindungan | IP65 (panel hadapan sahaja) |
| warna | Hitam |
| bahan | plastik |
3. Kandungan Pakej
- 1 x LILYTECH ZL-6231A Controller
- 1 x 220Vac TPE Temperature Sensor (2 meters)
4. Pemasangan
4.1 Pemasangan
The controller is designed for panel mounting. The required installation drilling dimensions are W71 x H29 mm. Ensure sufficient space behind the panel for wiring and ventilation.
4.2 Gambarajah Pendawaian
The back of the ZL-6231A controller features clearly labeled terminals for power input, sensor connection, and output relays. Ensure all connections are secure and correctly matched to avoid damage or malfunction. Refer to the diagram below for terminal identification.
Imej: Belakang view of the ZL-6231A controller showing the wiring terminals.
Sambungan Terminal:
- Terminals 1 & 2 (R2 Output): Connect to the load controlled by Relay 2 (e.g., a fan or secondary heater). Rated 10A/250V~.
- Terminals 3 & 4 (R1 Output): Connect to the primary heating element or main load controlled by Relay 1. Rated 10A/250V~.
- Terminals 5 & 6 (N1, L1): Power input for Relay 1.
- Terminals 7 & 8 (220V~ L, N): Main power supply input for the controller. Connect Live (L) and Neutral (N) from your 220V AC source.
- Terminals 9 & 10 (Warning Input): For external warning signals or safety interlocks.
- Terminals 10 & 11 (Temp. Sensor): Connect the provided TPE temperature sensor here.
Always ensure power is disconnected before performing any wiring to prevent electric shock or damage to the device.
5. Operasi
The ZL-6231A controller features a digital display and four control buttons on its front panel: 'P' (Program/Set), 'Up Arrow', 'S' (Set/Confirm), and 'Down Arrow'.
Imej: Depan view of the ZL-6231A controller showing the display and control buttons.
5.1 Kawalan Suhu Asas
- Hidupkan kuasa: Connect the controller to a 220V AC power source. The digital display will illuminate and show the current measured temperature.
- Tetapkan Suhu: Press the 'S' button briefly to enter the temperature setting mode. The display will flash the current set temperature. Use the 'Up Arrow' and 'Down Arrow' buttons to adjust the desired temperature value. Press 'S' again to confirm the setting and exit.
- Tetapan Parameter: Press and hold the 'P' button to access advanced parameter settings. Use the 'Up Arrow' and 'Down Arrow' buttons to navigate through different parameter codes (e.g., heating/cooling mode, hysteresis, temperature calibration). Press 'S' to view or modify a parameter's value, then use 'Up Arrow'/'Down Arrow' to adjust and 'S' to confirm. Press 'P' again to exit the parameter menu.
5.2 Fungsi Pemasa
The ZL-6231A includes a multifunctional timer for various timed operations. Specific timer settings (e.g., cycle time, on/off duration, delay functions) are typically configured through the 'P' (Program) menu. Refer to the detailed parameter list in the complete product manual for specific timer programming instructions and available modes.
6. Penyelenggaraan
- Pembersihan: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or corrosive chemicals, as these can damage the casing atau komponen elektronik.
- Penjagaan Sensor: Keep the temperature sensor clean and free from obstructions for accurate readings. Avoid bending or damaging the sensor cable.
- Keadaan Persekitaran: Ensure the controller operates within the specified working temperature and humidity ranges to prolong its lifespan. Avoid exposure to direct sunlight, excessive moisture, or environments with high condensation.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan tidak menyala | Tiada bekalan kuasa atau pendawaian yang salah. | Check power connections (Terminals 7 & 8). Ensure the 220V AC supply is active. |
| Bacaan suhu salah | Sensor disconnected, damaged, or calibration error. | Verify temperature sensor connection (Terminals 10 & 11). Ensure the sensor is not damaged and is placed correctly. Check for any calibration offsets in the parameter settings. |
| Output relay not activating | Incorrect wiring, set temperature/hysteresis, or timer function. | Check wiring to the load (Terminals 1-4). Verify that the set temperature and hysteresis are configured correctly for the desired heating/cooling action. Ensure the timer function (if active) is not preventing activation. |
| Paparan menunjukkan "HHH" atau "LLL" | Temperature sensor out of range or faulty. | "HHH" indicates over-range, "LLL" indicates under-range or sensor fault. Check sensor connection and integrity. Replace sensor if faulty. |
8. Petua Pengguna
- For optimal performance, ensure the controller is installed in a location with good ventilation and away from direct heat sources or extreme cold.
- When setting parameters, make small adjustments and observe the system's response before making further changes.
- Sentiasa periksa semula pendawaian sebelum menggunakan kuasa untuk mengelakkan kerosakan pada unit atau peralatan yang disambungkan.
9. Waranti dan Sokongan
For warranty information, technical assistance, or further support, please contact your retailer or the manufacturer directly. Please retain your purchase receipt as proof of purchase for any warranty claims.
