Manual Pengguna Sarung PC Menara Tengah DARK Flash DS900 ARGB

1. Pengenalan

The DARK Flash DS900 ARGB is a high-performance Mid Tower PC case designed for enthusiasts seeking excellent airflow, spacious component support, and vibrant addressable RGB lighting. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DS900 PC case.

2. Kandungan Pakej

Sila sahkan bahawa semua komponen terdapat dalam pakej:

• DARK Flash DS900 ARGB PC Case
• Accessory Box (screws, standoffs, cable ties, user manual)

3. Persediaan dan Pemasangan

Follow these steps to install your PC components into the DS900 case.

3.1 Menyediakan Kes

1. Buka bungkusan kes itu: Carefully remove the DS900 from its packaging.
2. Keluarkan Panel Sisi: The tempered glass side panel is typically secured with thumbscrews or a latch mechanism. Remove it to access the interior. The steel side panel on the opposite side should also be removed for cable management.

3.2 Pemasangan Komponen

1. Pemasangan Papan Induk:
   • Pasangkan pelindung I/O ke dalam bukaan belakang bekas.
   • Align your ATX, Micro-ATX, or Mini-ITX motherboard with the pre-installed standoffs. Ensure all screw holes align.
   • Selamatkan papan induk dengan skru yang disediakan.
2. Pemasangan Unit Bekalan Kuasa (PSU):
   • The DS900 supports ATX PSUs up to 200mm in length.
   • Install the PSU into its dedicated compartment at the bottom rear of the case, typically from the rear.
   • Selamatkan PSU dengan skru.
3. Pemasangan Pemacu Storan:
   • The case supports 2x 3.5" HDDs and 2x 2.5" SSDs.
   • Locate the drive cages/mounts. For 3.5" HDDs, slide them into the drive cage and secure with screws. For 2.5" SSDs, mount them to the designated trays or locations.
4. Pemasangan Kad Grafik (GPU):
   • The DS900 supports GPUs up to 400mm in length.
   • Tanggalkan penutup slot PCIe yang diperlukan dari belakang kes itu.
   • Insert your graphics card into the appropriate PCIe slot on the motherboard and secure it with a screw or latch.
5. Cooling System Installation (Fans/Radiators):
   • The case offers extensive cooling support:
     • Front: 3x 120mm/140mm fans or 240/280/360mm radiator
     • Top: 3x 120mm/140mm fans or 240/280/360mm radiator
     • Rear: 1x 120mm fan
     • Bottom: 2x 120mm fans
   • Install your chosen fans or radiators in their respective locations, securing them with screws.
   • Pastikan arah aliran udara yang betul (pengambilan/ekzos).

3.3 Pengurusan Kabel dan Sambungan I/O Hadapan

1. Pengurusan Kabel: Gunakan potongan penghalaan kabel dan titik pengikat di belakang dulang papan induk untuk menyusun dan mengikat kabel. Ini meningkatkan aliran udara dan estetika.
2. Front I/O Connections: Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

3.4 Perhimpunan Akhir

1. Once all components are installed and cables are managed, reattach the steel side panel and then the tempered glass side panel.
2. Pastikan semua skru diketatkan dengan selamat.

4. Arahan Operasi

4.1 Menghidupkan

Press the power button located on the front I/O panel to turn on your computer.

4.2 Kawalan Pencahayaan ARGB

The DS900 supports Addressable RGB (ARGB) lighting. If your motherboard has a 5V 3-pin ARGB header, you can connect the case's ARGB cables to it and control the lighting effects via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). If your motherboard does not have an ARGB header, an external ARGB controller (not included) may be required for lighting control.

4.3 Front I/O Ports

Panel I/O hadapan menyediakan akses mudah kepada:

• 1x port USB 3.0
• 2x port USB 2.0
• HD Audio (headphone and microphone jacks)
• Butang Kuasa
• Butang Tetapkan Semula

5. Penyelenggaraan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat komponen PC anda.

5.1 Penapis Habuk

The DS900 is equipped with removable dust filters on the top and bottom. Periodically remove and clean these filters to prevent dust buildup inside the case, which can hinder airflow and component cooling.

• Gently slide out the filters.
• Clean them with a soft brush or rinse with water (ensure they are completely dry before reinstallation).

5.2 Tempered Glass Panels

Clean the tempered glass panels with a microfiber cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that could damage the glass or coatings.

5.3 Pembersihan Dalaman

Occasionally, use compressed air to blow out dust from inside the case, especially around fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.

6. Penyelesaian masalah

Berikut ialah beberapa isu biasa dan penyelesaian yang berpotensi:

• PC does not power on:
  • Check if the PSU is properly connected to the wall outlet and switched on.
  • Ensure all power cables (24-pin ATX, 8-pin CPU, PCIe power) are securely connected to the motherboard and components.
  • Verify the front panel power switch cable is correctly connected to the motherboard header.
• Fans are not spinning:
  • Check if fan cables are securely connected to the motherboard fan headers or a fan controller.
  • Ensure the PSU is providing power.
• ARGB lighting is not working:
  • Verify the ARGB cable is correctly connected to a 5V 3-pin ARGB header on your motherboard (not a 12V 4-pin RGB header).
  • Ensure your motherboard's RGB software is installed and configured correctly.
  • If using an external controller, check its power and connections.
• USB ports not functioning:
  • Check if the front panel USB 3.0 and USB 2.0 cables are correctly connected to their respective headers on the motherboard.

7. Spesifikasi

8. Petua Pengguna

• Optimumkan Aliran Udara: With support for multiple fans, consider a balanced intake and exhaust fan configuration for optimal cooling performance. Typically, front and bottom fans as intake, and top and rear fans as exhaust.
• Pengurusan Kabel: Take your time with cable management behind the motherboard tray. This not only improves aesthetics but also prevents cables from obstructing airflow.
• Penyegerakan ARGB: If your motherboard supports ARGB sync, connect the case's ARGB cables to the motherboard's 5V 3-pin header to synchronize lighting effects across your system.
• Pembersihan Penapis Habuk: Regularly clean the magnetic dust filters to maintain good airflow and keep the interior dust-free.

9. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. You can also visit the official darkFlash website for more resources:

www.darkflash.com