HITBOX ARC200S 2-in-1 Welding Machine User Manual

1. Pengenalan

This manual provides instructions for the safe operation, maintenance, and troubleshooting of your HITBOX ARC200S 2-in-1 Welding Machine. Please read this manual thoroughly before operating the machine to ensure safe and efficient use.

2. Langkah-langkah Keselamatan

Sentiasa mengutamakan keselamatan semasa mengendalikan peralatan kimpalan. Kegagalan mematuhi garis panduan keselamatan boleh mengakibatkan kecederaan serius atau kematian.

• Pakai peralatan pelindung diri (PPE) yang sesuai, termasuk topi keledar kimpalan dengan teduhan yang betul, pakaian kalis api, sarung tangan kimpalan dan kasut keselamatan.
• Pastikan pengudaraan yang mencukupi untuk mengelakkan terhidu asap kimpalan.
• Simpan alat pemadam api berdekatan.
• Jangan mengimpal berhampiran bahan mudah terbakar.
• Ensure the work area is dry and free from electrical hazards.
• Sentiasa putuskan bekalan elektrik sebelum melakukan penyelenggaraan atau pelarasan.
• The machine is equipped with internal protection devices to prevent overheating and overcurrent.

3. Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• 1 x ARC200S Mini NEW Welder
• 1 x 1.5m Wire 200A Electrode Holder
• 1 x 1.5m Wire 300A Earth Clamp
• 5 x 2mm Welding Rods
• 1 x Wire Brush
• 1 x Manual Pengguna (dokumen ini)

Note: A WP17V Lift TIG Torch is required for Lift TIG welding and must be purchased separately.

4. Spesifikasi

4.1 MMA (ARC) Welding Specifications

• Digital Display Current: 20-200A
• Actual Current: 20-120A
• Electrode Diameter: 1.6-2.5mm
• Welding Thickness: 1-6mm
• Compatible Welding Rods: 6010, 6011, 6013

4.2 Lift TIG Welding Specifications

• Digital Display Current: 15-200A
• Actual Current: 15-120A
• Welding Thickness: 0.8-4mm

5. Persediaan dan Sambungan

5.1 Sambungan Kuasa

• Ensure the welding machine is connected to a power source matching its voltage requirement (110V for US models, 220V for EU models).
• Verify the power outlet is properly grounded.

5.2 Menyambungkan Kabel Kimpalan

1. Connect the 200A Electrode Holder cable to the appropriate terminal on the welding machine.
2. Connect the 300A Earth Clamp cable to the ground terminal on the welding machine.
3. Pasang Cl Bumiamp securely to the workpiece, ensuring good electrical contact.
4. Insert the welding rod into the Electrode Holder.

6. Operasi

The HITBOX ARC200S is a 2-in-1 welding machine capable of ARC/MMA and LIFT TIG welding. It features an intelligent digital display for easy monitoring and adjustment.

6.1 Menghidupkan dan Pemilihan Mod

1. Turn on the main power switch. The LED display will illuminate.
2. Use the mode selection button (indicated on the display, e.g., "MMA" or "LIFT TIG") to choose your desired welding process.

6.2 Melaraskan Parameter Kimpalan

• Pelarasan Semasa: Use the main knob to adjust the welding current (Amperage) as displayed on the LED screen. Refer to the specifications for appropriate current ranges for MMA and Lift TIG.
• Electrode Size/Thickness: The display shows recommended electrode sizes and welding thickness. Adjust current accordingly.
• Feature Toggles: The display includes toggles for "Hot Start", "Arc Force", "VRD" (Voltage Reduction Device), and "Anti-stick". Activate or deactivate these features as needed for your welding task.
  • Permulaan panas: Provides an initial boost of current to help ignite the arc easily.
  • Pasukan Arka: Prevents the electrode from sticking to the workpiece by increasing current when the arc length becomes too short.
  • VRD (Jilidtage Peranti Pengurangan): Mengurangkan vol litar terbukatage for increased safety, especially in damp syarat.
  • Anti-stick: Automatically reduces the current if the electrode sticks, allowing it to be easily removed without damaging the electrode holder.

6.3 Proses Kimpalan (Umum)

• Pastikan pembumian benda kerja yang betul.
• Position yourself comfortably and safely.
• Initiate the arc according to the selected welding mode (MMA or Lift TIG).
• Kekalkan panjang lengkok dan kelajuan perjalanan yang konsisten untuk kualiti kimpalan yang optimum.
• The integrated system synergy chip technology automatically matches the starting arc current while adjusting for metal thickness, simplifying operation.

7. Penyelenggaraan

Penyelenggaraan berkala memastikan jangka hayat dan operasi mesin kimpalan anda yang selamat.

• Pembersihan: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the cooling vents. Ensure the machine is unplugged before cleaning.
• Pemeriksaan Kabel: Periksa kabel kimpalan, pemegang elektrod dan penutup bumi secara berkalaamp untuk kerosakan, keretakan atau sambungan longgar. Gantikan komponen yang rosak dengan segera.
• Storan: Simpan mesin kimpalan di persekitaran yang kering dan bersih, jauh daripada habuk, kelembapan dan bahan menghakis yang berlebihan.
• Operasi Kipas: Ensure the cooling fan is free from obstructions and operating correctly to prevent overheating.

8. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi. Untuk masalah yang tidak disenaraikan di sini, hubungi sokongan pelanggan.

9. Petua Pengguna

• For beginners, start with lower current settings and practice on scrap metal to get a feel for the machine.
• Always ensure your workpiece is clean and free of rust, paint, or oil for the best weld quality and arc stability.
• Utilize the "Hot Start" and "Arc Force" features, especially when using difficult-to-start electrodes or welding in challenging positions.
• The lightweight and portable design (Figure 7) makes it easy to move the welder to different job sites.

10. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.