SINOTIMER CN101S Digital LCD Programmable Timer Switch

1. Pengenalan

The SINOTIMER CN101S is a versatile digital LCD programmable timer switch designed for precise control of electrical appliances. It offers daily and weekly programming with a minimum interval of 1 second, making it suitable for a wide range of applications from household automation to industrial control. This manual provides detailed instructions for the installation, operation, and programming of your CN101S timer switch.

2. Ciri-ciri

• Paparan LCD yang mudah dibaca dengan penunjuk LED.
• Minimum 1-second interval for precise timing.
• Up to 8 ON/OFF programs per day, with 15 combinations for weekly scheduling.
• 24 hours / 7 days a week programmable functionality.
• Countdown function with a maximum of 24 hours countdown to OFF.
• Built-in rechargeable battery for memory backup during power failures (up to 60 days).
• Manual ON/OFF/AUTO control.
• Designed for panel or wall mounting.

3. Maklumat Keselamatan

⚠ AMARAN: Produk ini boleh mendedahkan anda kepada bahan kimia termasuk phthalates (DEHP), yang diketahui oleh Negeri California boleh menyebabkan kanser dan kecacatan kelahiran atau kemudaratan reproduktif lain. Untuk maklumat lanjut pergi ke www.P65Warnings.ca.gov.

Always ensure proper electrical installation by a qualified professional if you are unsure. Disconnect power before installation or maintenance. Do not exceed the maximum load rating of the device.

4. Produk Lebihview

Butang Kawalan:

• P (Program): Memasuki atau keluar dari mod pengaturcaraan.
• D+ (Hari): Adjusts the day of the week in time setting or programming mode.
• H+ (Jam): Adjusts the hour in time setting or programming mode.
• M+ (Minit): Adjusts the minute in time setting or programming mode.
• Ikon Jam: Used in combination with D+, H+, M+ to set the current time.
• R (Tetapkan Semula): Resets the timer to factory defaults.
• MANUAL: Bertukar antara mod HIDUP, AUTO dan MATI.

5. Spesifikasi

6. Pemasangan

IMPORTANT: Disconnect all power before attempting any wiring. Incorrect wiring can cause damage to the device, property, or personal injury. If you are not comfortable with electrical wiring, please consult a qualified electrician.

The CN101S timer switch is designed for panel or wall mounting. Ensure the mounting location is dry, well-ventilated, and free from excessive heat or vibration.

Wiring Instructions (Example for 200-250VAC Model):

The wiring diagram below is an example for a 200-250VAC version of the CN101S. If your unit is a 12V, 24V, or 110V model, the wiring configuration will be different. Always refer to the specific wiring diagram printed on your unit or provided with your specific voltage model.

1. Terminal 1 (TALIAN): Connect the live (phase) wire of your power supply to this terminal.
2. Terminal 2 (INPUT NEUT): Connect the neutral wire of your power supply to this terminal.
3. Terminal 3 (NEUT LOAD): Connect the neutral wire of the appliance you wish to control to this terminal. This terminal is typically internally connected to Terminal 2 (Neutral Input).
4. Terminal 4 (LOAD): Connect the live (phase) wire of the appliance you wish to control to this terminal. This is the switched live output.
5. Terminal 5 (LOAD): This terminal is typically used for a second switched live output or for specific wiring configurations. Consult your specific unit's diagram if using. For a single load, Terminal 4 is usually sufficient.

Ensure all connections are secure and insulated. After wiring, mount the timer switch using the provided screw holes.

7. Persediaan dan Operasi Awal

7.1. Power On and Initial Charge:

Upon first power-up, the internal rechargeable battery may be low. Allow the unit to be powered for at least 15-30 minutes to charge the battery. The display may be blank or dim until sufficient charge is present.

7.2. Resetting the Timer:

Tekan ke R (Reset) button using a pointed object (e.g., a pen tip). This will clear all settings and reset the timer to its default state (usually 0:00, Monday, OFF mode).

7.3. Setting Current Time and Day:

1. Tekan dan tahan butang Ikon Jam butang.
2. While holding the Clock Icon button, press D+ untuk menetapkan hari semasa dalam minggu.
3. While holding the Clock Icon button, press H+ untuk menetapkan jam semasa.
4. While holding the Clock Icon button, press M+ untuk menetapkan minit semasa.
5. Release the Clock Icon button. The time and day are now set.

7.4. Kawalan Manual:

Tekan ke MANUAL button repeatedly to cycle through the operating modes:

• ON: The output is continuously ON.
• AUTO: The output operates according to the programmed ON/OFF times.
• MATI: The output is continuously OFF.

For programmed operation, ensure the timer is set to AUTO mod.

8. Pengaturcaraan ON/OFF Masa

The CN101S allows for up to 8 ON/OFF programs. Each program can be set for specific days of the week or combinations of days.

1. Tekan ke P (Program) button once. The display will show "1 ON" and the time will flash.
2. Tekan D+ repeatedly to select the desired day(s) for this program. Options include individual days, weekdays, weekends, all days, or various combinations.
3. Tekan H+ to set the desired hour for the first ON time.
4. Tekan M+ to set the desired minute for the first ON time.
5. Tekan P sekali lagi. Paparan akan menunjukkan "1 OFF" dan masa akan berkelip.
6. Repeat steps 2-4 to set the desired day(s), hour, and minute for the first OFF time.
7. Teruskan menekan P to cycle through "2 ON", "2 OFF", up to "8 ON", "8 OFF", setting each program as needed. If you do not need all 8 programs, simply press P until you exit programming mode.
8. Selepas menetapkan semua program yang dikehendaki, tekan butang Ikon Jam butang untuk keluar dari mod pengaturcaraan dan kembali ke paparan masa semasa.

Penting: Pastikan pemasa berada dalam keadaan AUTO mode for the programs to execute.

8.1. Countdown Function:

To use the countdown function (max 24 hours countdown to OFF):

1. While in normal time display, press and hold the M+ button for a few seconds until "d ON" or "d OFF" appears.
2. guna H+ dan M+ to set the desired countdown duration (hours and minutes).
3. Tekan M+ again to start the countdown. The display will show the remaining time.
4. The output will switch OFF when the countdown reaches zero.

9. Penyelenggaraan

• Keep the timer switch clean and dry. Avoid exposure to moisture, dust, and corrosive substances.
• Jangan cuba membuka atau membaiki unit sendiri. Rujuk kepada kakitangan perkhidmatan yang berkelayakan.
• The internal rechargeable battery is designed for long-term use and typically does not require replacement. If the display consistently goes blank or loses settings during power outages, the battery may need professional servicing.

10. Penyelesaian masalah

11. Petua Pengguna

Tiada petua pengguna khusus tersedia daripada reviews or Q&A at this time. General tips for optimal use:

• Before initial use, connect the timer to power for at least 30 minutes to ensure the internal battery is sufficiently charged for memory backup.
• Always double-check your program settings, especially the days of the week, to avoid unintended operation.
• If you only need a temporary ON/OFF, consider using the countdown function instead of setting a full program.

12. Waranti dan Sokongan

For warranty information, please refer to the terms and conditions provided by your retailer or the manufacturer at the time of purchase. If you encounter any issues not covered in this manual or require technical assistance, please contact the seller or manufacturer's customer support with your product model (CN101S) and purchase details.