pengenalan
The Rapoo P5 RGB Illusion Backlight Contact Charging Base is designed to provide convenient and efficient charging for compatible Rapoo wireless mice. Featuring magnetic contact charging, vibrant RGB lighting, and extended USB functionality, it enhances your desktop setup while keeping your mouse powered.
Video: Selesaiview of Rapoo P5 features including magnetic charging, RGB lighting, and USB ports.
Kandungan Pakej
- Rapoo P5 RGB Illusion Backlight Contact Charging Base
- Contact Charging Module (for compatible mice)
- Kabel Jenis-C USB
- Manual Pengguna
Image: Rapoo P5 Charging Base, contact charging module, and user manual in its packaging.
Arahan Persediaan
- Sambungkan Kuasa: Connect the provided USB Type-C cable to the USB-C port on the back of the charging base. Plug the other end of the cable into a computer's USB port or a 5V USB power adapter. The RGB lighting on the base should illuminate.
- Install Charging Module (for mouse): For your compatible Rapoo wireless mouse, locate the small compartment on the underside of the mouse, typically near the sensor. Carefully remove the existing cover or USB receiver.
- Insert Contact Charging Module: Insert the included contact charging module into the mouse's compartment. Ensure it is securely fitted and flush with the mouse's surface.
- Place Mouse on Base: Gently place your mouse onto the charging base, aligning the magnetic contacts on the mouse with the pins on the base. The magnetic connection will secure the mouse, and charging will begin automatically.
Image: Step-by-step illustration of inserting the contact charging module into a compatible Rapoo mouse.
Image: A Rapoo mouse being charged wirelessly via magnetic contact on the P5 base.
Arahan Operasi
Mengecas Tetikus Anda
Once the contact charging module is installed in your compatible mouse and the P5 base is powered, simply place the mouse onto the base. The magnetic connection will ensure proper alignment, and your mouse will begin charging. The RGB lighting on the base will be active during operation.
RGB Backlight System
The P5 charging base features an Illusion RGB backlight system with 5 cyclical lighting modes. A small button located next to the USB-A port on the base can be used to cycle through these lighting modes or to turn the lighting on/off.
Extended USB Ports
The charging base includes an extended USB-A port. This port supports data transfer, allowing you to connect your mouse's wireless receiver or other USB devices directly to the charging base. This can help keep your desktop tidy and improve signal integrity for your wireless mouse.
Image: The USB Type-C power input and the extended USB-A port on the Rapoo P5 charging base.
Penyelenggaraan
Pembersihan
To clean the charging base, use a soft, dry, and lint-free cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components.
Power Source Guidelines
The P5 charging base is designed based on the USB protocol. It is recommended to connect the device to a computer's USB port or use a power adapter that does not exceed 5V. Do not use high-power devices or fast chargers (e.g., those for smartphones) to charge the product, as this may lead to overheating or damage.
Menyelesaikan masalah
- Mouse is not charging:
- Ensure the USB Type-C cable is securely connected to both the charging base and a working power source.
- Verify that the contact charging module is correctly inserted into your mouse.
- Make sure the mouse is properly aligned on the charging base, and the magnetic contacts are engaged.
- Confirm your mouse model is listed as compatible with the P5 charging base.
- RGB lighting is not working:
- Ensure the charging base is powered on.
- Press the RGB control button on the side of the base to cycle through modes or activate the lighting.
- Data transfer issues via extended USB port:
- Ensure the charging base is connected to a computer's USB port that supports data transfer, not just power.
- Verify the device connected to the extended USB port is functioning correctly when connected directly to the computer.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Product Model/Name | P5 RGB Illusion Backlight Contact Charging Base |
| Dimensi (L x W x H) | 75mm x 43mm x 32mm (2.95 x 1.69 x 1.26 inci) |
| Berat badan | 71g / 2.5oz |
| Vol Operasitage | 5V |
| Mengecas Arus | ≤350mA |
| Jenis Antaramuka | USB (Type-C input, Type-A extension) |
| Pakej | ya |
| Bateri Termasuk | No (for the base itself) |
Image: Dimensions and weight of the Rapoo P5 charging base.
Compatible Rapoo Mouse Models
The Rapoo P5 charging base is compatible with the following Rapoo wireless mouse models:
- Computer Mice: MT760PRO, MT760, MT760mini
- Tikus Permainan: VT7, VT7 MAX, VT3, VT3 MAX, VT3PRO, VT3PRO MAX, VT1PRO, VT1Air MAX, VT1PRO MAX, VT9PRO, VT9PRO Mini, V300PRO, V300SE
Image: Visual guide to compatible Rapoo mouse models for the P5 charging base.
Petua pengguna
- Included Charging Module: The P5 charging base package includes the necessary contact charging module for your compatible mouse. You do not need to purchase this module separately.
- Sahkan Keserasian: Sebelum pembelianasing or using, always double-check that your specific Rapoo mouse model is listed in the compatibility section to ensure proper functionality.
- Optimal Power Source: For the best performance and longevity of your charging base, always connect it to a standard 5V USB power source, such as a computer's USB port or a low-power USB wall adapter.
Waranti dan Sokongan
For detailed warranty information, technical support, or service inquiries, please refer to the official Rapoo webtapak atau hubungi peruncit dari mana anda membeli produk tersebut. Simpan bukti pembelian anda untuk tuntutan waranti.
