1. Pengenalan
The Newfast NF-RE523 is a high-performance 1200Mbps dual-band WiFi repeater designed to extend your wireless network coverage and eliminate dead zones in your home or office. Featuring a smart OLED display and four high-gain 3dBi antennas, it provides stable and fast internet access across a wider area. This manual provides detailed instructions for setup, operation, and troubleshooting to ensure optimal performance of your device.

Figure 1: Newfast NF-RE523 Smart OLED Wireless Repeater
2. Ciri-ciri Utama
- Liputan WiFi Lanjutan: Eliminates wireless signal blind spots, providing full coverage throughout your property.
- Smart OLED Display: Provides clear, at-a-glance information on the device's working status, making it easy to monitor and use.
- Dual Band 1200Mbps: Supports both 2.4GHz (up to 300Mbps) and 5.8GHz (up to 867Mbps) bands for stronger anti-interference, higher speeds, and better compatibility with modern gigabit routers.
- High Gain 4*3dBi Antennas: Four external antennas significantly improve signal coverage and wall penetration. The antennas are flexibly rotatable to optimize signal transmission and reception.
- Kesambungan Berwayar: Includes a 10/100Mbps RJ45 Ethernet port, allowing connection to devices like TVs and computers for stable wired internet access.
- Scientific Heat Dissipation: Designed for efficient cooling to support 24-hour stable operation without connection drops, preventing overheating and component aging.

Gambar 2: Dalaman view highlighting the Smart OLED Display

Figure 3: Visual comparison of OLED display advantage
3. Kandungan Pakej
Sila semak pakej untuk item berikut:
- 1 x Newfast NF-RE523 OLED Repeater
- 1 x Kabel Rangkaian
- 1 x Panduan Pemasangan Pantas

Figure 4: Package contents including the NF-RE523, network cable, and user manual
4. Spesifikasi
| Atribut | Nilai |
|---|---|
| Model | NF-RE523 |
| Standard Tanpa Wayar | IEEE802.11ac/a/b/g/n |
| Julat Kekerapan | 2.412~2.472GHz; 5.180~5.825GHz |
| Kadar Penghantaran Wi-Fi 2.4G | 300Mbps |
| Kadar Penghantaran Wi-Fi 5G | 867Mbps |
| Maks. Kadar Data LAN | 867Mbps |
| Kadar Pemindahan Berwayar | 10/100Mbps |
| Antena | 4*3dBi Dual Band Antennas |
| Butang | 1*Butang WPS/RST |
| Skrin Paparan | OLED (WPS/Ports/WiFi/Network status) |
| Pelabuhan Fizikal | 1*10/100Mbps LAN/WAN RJ45 Port Ethernet |
| kuasa | 100~240V, 50/60Hz |
| Kuasa Keluaran (Maks) | 126mW (≈21dBm) |
| Mod Kerja | Repeater / AP / Router / Client Mode |
| Dimensi | 197*62*45mm |
| Suhu Bekerja | -10℃~55℃ |
| Suhu Penyimpanan | -40℃~70℃ |
| Kelembapan Bekerja | 10%~90%RH Tidak pemeluwapan |
| Kelembapan Penyimpanan | 5%~90%RH Tidak pemeluwapan |

Figure 5: Product dimensions of the NF-RE523
5. Arahan Persediaan
Follow these three easy steps to set up your Newfast NF-RE523 WiFi Repeater:
- Sambungkan ke WiFi Pengulang: On your phone or computer, connect to the WiFi network broadcast by the repeater. The SSID will typically be named like
NEWFAST_xxx. - Akses Halaman Persediaan: Buka a web pelayar dan masukkan
192.168.10.1in the address bar. This will take you to the repeater's configuration page. - Konfigurasikan Mod Pengulang: On the configuration page, select 'Repeater Mode'. Choose the WiFi SSID of your main router that you wish to extend and enter its password. Once successfully configured, the corresponding icon on the OLED display will illuminate.
The NF-RE523 features a 'Setup with Memory' function. After the initial configuration, the device retains its settings and can be placed anywhere in your house without needing to reconfigure, allowing for flexible placement to optimize coverage.

Figure 6: Visual guide for the three easy setup steps

Gambar 7: Cthample of NF-RE523 placement for optimal coverage
6. Mod Operasi
The Newfast NF-RE523 supports multiple operating modes to suit various network requirements:
6.1. Mod Pengulang (Tanpa Wayar ke Tanpa Wayar)
In this mode, the NF-RE523 extends the existing WiFi signal from your main router to areas with weak or no coverage. It wirelessly connects to your main router and re-broadcasts the signal, effectively amplifying the range.

Figure 8: Diagram illustrating Repeater Mode operation
6.2. Mod AP/Penghala (Berwayar ke Tanpa Wayar)
When configured as an Access Point (AP) or Router, the NF-RE523 can create a new wireless network from a wired Ethernet connection. You can plug a network cable from your modem or router into the NF-RE523's RJ45 port, and it will broadcast a new WiFi signal.
6.3. Client Mode (Wireless to Wired)
In Client Mode, the NF-RE523 connects wirelessly to an existing WiFi network and provides internet access to a wired device (e.g., desktop PC, smart TV, gaming console) via its RJ45 Ethernet port. This is useful for devices without built-in WiFi capabilities.

Figure 9: Diagrams illustrating AP/Router Mode and Client Mode operations
7. Petua Pengguna
- The password for the repeater, when set up in Repeater Mode, will be the same as your main router's WiFi password.
- Ensure the repeater is placed in an optimal location, ideally halfway between your main router and the desired coverage area, to maximize signal strength and minimize interference.
- Avoid placing the repeater near large metal objects, concrete walls, or other electronic devices that may cause signal interference.
- When setting up your WiFi password, note that it supports a maximum of 32 characters and does not support special characters such as spaces.
8. Penyelesaian masalah
- Tiada Akses Internet: Check if the repeater is properly connected to your main router. Verify the WiFi password entered during setup is correct. Try restarting both your main router and the repeater.
- Kelajuan Perlahan atau Sambungan Terputus: This can often be caused by poor signal strength between the repeater and the main router. Try repositioning the repeater closer to your main router or adjusting the antennas. Ensure there are no major obstructions.
- Tidak Dapat Mengakses Halaman Persediaan (192.168.10.1): Ensure your device is connected to the repeater's WiFi network (e.g., NEWFAST_xxx) and not your main router's network. Clear your browser's cache or try a different browser.
- OLED Display Not Showing Status: Ensure the device is powered on correctly. If the issue persists, try resetting the device to factory defaults using the WPS/RST button.
- Menetapkan semula kepada Lalai Kilang: To reset the device, press and hold the WPS/RST button for approximately 5-8 seconds until the OLED display indicates a reset. This will erase all custom settings.
9. Penyelenggaraan
- Keep the device in a well-ventilated area to ensure proper heat dissipation.
- Elakkan daripada mendedahkan peranti kepada suhu yang melampau, cahaya matahari langsung atau kelembapan yang tinggi.
- Clean the device periodically with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Regularly check for firmware updates on the manufacturer's webtapak untuk memastikan prestasi dan keselamatan yang optimum.
10. Waranti dan Sokongan
For technical support, troubleshooting assistance, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Newfast/Comfast webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
11. Video Demonstrasi Produk
Video 1: Newfast NF-RE523 WiFi Repeater Product Demonstration



