TP-LINK Festa FS308G 8-Port Gigabit Smart Switch User Manual

1. Pengenalan

The TP-LINK Festa FS308G is an 8-Port Gigabit Smart/Unmanaged Desktop Switch designed to expand your network capacity with high-speed connectivity. Featuring 8 Gigabit Ethernet ports, this switch provides a simple, cost-effective, high-performance, non-disruptive, and standard-compliant upgrade to an old network to a 1000Mbps network. It supports Power over Ethernet (PoE) on all 8 ports, simplifying the deployment of PoE-powered devices such as IP cameras, wireless access points, and VoIP phones.

Rajah 1: Depan view of the TP-LINK Festa FS308GP Switch

2. Kandungan Pakej

Before you begin installation, ensure that your package contains the following items:

• TP-LINK Festa FS308G 8-Port Gigabit Smart Switch
• Penyesuai Kuasa
• Kord Kuasa
• Kaki Getah
• Mounting Kit (for wall-mount or rack-mount, if applicable)
• Panduan Pemasangan Pantas

Figure 2: Switch and Accessories

3. Penerangan Fizikal

3.1 Panel Depan

The front panel features 8 Gigabit Ethernet ports and various LED indicators for status monitoring.

Gambar 3: Susun atur Panel Depan

Penunjuk LED:

• LED kuasa: Menunjukkan status kuasa suis.
• LED PoE MAKSIMUM: Indicates if the total PoE power budget is nearing or exceeding its limit.
• PoE Status LEDs (per port): Indicates if a port is delivering PoE power.
• Speed/Link/Act LEDs (per port): Indicates link status, activity, and connection speed (e.g., green for Gigabit, amber for 10/100Mbps).
• Butang Tetapkan Semula: Digunakan untuk memulihkan tetapan lalai kilang.

3.2 Panel Belakang

The rear panel includes the power input connector and a grounding screw.

Gambar 4: Susun Atur Panel Belakang

4. Persediaan dan Pemasangan

4.1 Langkah Keselamatan

• Pastikan bekalan kuasa voltage sepadan dengan keperluan suis.
• Jangan menyekat bukaan pengudaraan.
• Avoid placing the switch in direct sunlight, near heat sources, or in excessively humid environments.
• Gunakan hanya penyesuai kuasa yang disediakan.

4.2 Penempatan Fizikal

The switch can be placed on a desktop, mounted on a wall, or installed in a rack, depending on your needs and the included accessories.

Peletakan Desktop:

Place the switch on a flat, stable surface. Attach the included rubber feet to the bottom of the switch to prevent slipping and provide stability.

Pemasangan Dinding:

If wall mounting, use the provided mounting kit. Ensure the wall can support the weight of the switch and connected cables. Mark two points on the wall, drill holes, insert anchors, and secure the mounting screws, leaving a small gap for the switch's mounting slots.

4.3 Menyambungkan Suis

1. Sambungkan Peranti Rangkaian: Connect your network devices (computers, servers, IP cameras, Wi-Fi APs, VoIP phones, etc.) to any of the 8 Gigabit Ethernet ports using standard Ethernet cables. For PoE-powered devices, ensure they are PoE-compatible.
2. Sambung ke Kuasa: Connect the provided power adapter to the switch's power input port on the rear panel, then plug the power adapter into a suitable electrical outlet.
3. Sahkan Kuasa: Once powered on, the Power LED on the front panel should illuminate.

Figure 5: Basic Network Connection

Figure 6: PoE Connection with IP Cameras

Figure 7: PoE Connection with Wi-Fi Access Points

5. Mengendalikan Suis

The TP-LINK Festa FS308G is an unmanaged switch, meaning it operates plug-and-play without requiring complex configuration. Once connected, it automatically detects network speeds and provides power to connected PoE devices.

5.1 LED Status Interpretation

• LED kuasa:
  • pada: Suis dihidupkan.
  • Mati: Suis dimatikan.
• LED PoE MAKSIMUM:
  • pada: The total PoE power consumption is at or near the maximum budget.
  • Berkelip: The total PoE power consumption has exceeded the maximum budget, and some PoE ports may be shut down.
  • Mati: PoE power consumption is within normal limits.
• PoE Status LEDs (per port):
  • pada: The port is supplying PoE power to a connected device.
  • Mati: The port is not supplying PoE power.
• Speed/Link/Act LEDs (per port):
  • Hijau (Pepejal): A Gigabit (1000Mbps) link is established.
  • Hijau (berkelip): Data is being transmitted or received at Gigabit speed.
  • Amber (Solid): A 10/100Mbps link is established.
  • Amber (Flashing): Data is being transmitted or received at 10/100Mbps speed.
  • Mati: Tiada peranti yang disambungkan ke port, atau peranti yang disambungkan dimatikan.

6. Penyelenggaraan

6.1 Pembersihan

• Sentiasa putuskan sambungan kuasa sebelum membersihkan.
• Gunakan kain lembut dan kering untuk mengelap bahagian luar suis.
• Jangan gunakan pembersih cecair atau aerosol.

6.2 Pertimbangan Alam Sekitar

• Pastikan pengudaraan yang mencukupi di sekitar suis untuk mengelakkan terlalu panas.
• Operate the switch within the specified temperature and humidity ranges (refer to Specifications section).

6.3 Menetapkan Semula Suis

If the switch is not functioning correctly, you can perform a factory reset. With the switch powered on, use a paperclip or similar pointed object to press and hold the Reset button on the front panel for approximately 5-10 seconds until the LEDs flash. The switch will then reboot with factory default settings.

7. Penyelesaian masalah

7.1 Tiada Kuasa

• Pastikan kord kuasa disambungkan dengan kukuh pada suis dan soket kuasa.
• Sahkan bahawa salur keluar kuasa berfungsi.
• Check if the power adapter is working correctly.

7.2 Tiada Pautan/Aktiviti di Pelabuhan

• Periksa sambungan kabel Ethernet di kedua-dua hujungnya. Cuba kabel yang lain.
• Pastikan peranti yang disambungkan dihidupkan dan berfungsi dengan betul.
• Verify that the network adapter of the connected device is enabled.
• Cuba sambungkan peranti ke port lain pada suis.

7.3 Kelajuan Rangkaian Perlahan

• Ensure all connected devices and cables support Gigabit Ethernet for optimal performance.
• Periksa trafik rangkaian yang berlebihan atau aplikasi yang intensif lebar jalur.
• Verify that the Speed/Link/Act LED for the port indicates a Gigabit connection (Green).

7.4 Peranti PoE Tidak Menerima Kuasa

• Ensure the connected device is a PoE-compatible device (PD).
• Check the PoE Status LED for the port; it should be On.
• Verify that the total PoE power consumption is not exceeding the switch's budget (check PoE MAX LED). If it's flashing, disconnect some PoE devices or use a higher-power PoE switch.
• Cuba kabel Ethernet yang berbeza.

8. Spesifikasi

Rajah 8: Spesifikasi Teknikal

Figure 9: PoE Budget and Power Consumption

Rajah 10: Dimensi Produk

Figure 11: Environmental Specifications

Umum

• Pelabuhan: 8 x 10/100/1000Mbps RJ45 Ports (Auto-Negotiation/Auto MDI/MDIX)
• Pelabuhan PoE: 8 Ports (PoE+)
• Standard PoE: IEEE 802.3af / sesuai
• Belanjawan Kuasa PoE: Refer to Figure 9 for detailed budget.
• Kapasiti Penukaran: 16 Gbps
• Kadar Penghantaran Paket: 11.9 Mpps
• Jadual Alamat MAC: 4K penyertaan
• Bingkai Jumbo: 9KB
• Bekalan Kuasa: External Power Adapter (Output: 53.5VDC / 1.31A)
• Dimensi (W x D x H): Refer to Figure 10 for detailed dimensions.

alam sekitar

• Suhu Operasi: 0°C hingga 40°C (32°F hingga 104°F)
• Suhu penyimpanan: -40°C hingga 70°C (-40°F hingga 158°F)
• Kelembapan Operasi: 10% hingga 90% tidak terkondensasi
• Kelembapan Penyimpanan: 5% hingga 90% tidak terkondensasi

Pensijilan

• CE, FCC, RoHS

Figure 12: Certifications

9. Petua Pengguna

• For optimal performance, use high-quality Cat5e or Cat6 Ethernet cables for all connections.
• When connecting PoE devices, ensure the total power consumption does not exceed the switch's PoE budget to avoid unexpected shutdowns or instability.
• Place the switch in a location with good airflow to prevent overheating, especially if many PoE devices are connected.
• If experiencing network issues, a simple power cycle of the switch and connected devices can often resolve temporary glitches.

10. Waranti dan Sokongan

TP-LINK provides a limited warranty for this product. Please refer to the official TP-LINK website or the warranty card included in your package for detailed warranty terms and conditions specific to your region.

Sokongan Teknikal

For technical support, firmware updates, and additional resources, please visit the official TP-LINK support weblaman web. Anda biasanya boleh menemui Soalan Lazim, panduan penyelesaian masalah dan maklumat hubungan untuk khidmat pelanggan di sana.

Figure 13: TP-LINK SMB Warranty Information

Figure 14: TP-LINK After-Sales Information